Buscar en el registro

While cutting a bearing out of a hub on a rock truck, he got a small piece of metal in his eye.

Employee was scraping roadway with a backhoe and did not see a washed out area, on the side of road, when the backhoe overturned onto it's side.

While pulling beams out of hole, a pin that connects beams together caught on blade, top of pin broke off, striking Member in chest and chin causing a laceration. Member was transported to area hospital where he recieved stitches to his chin.

THE ROOFBOLTER HAS TRACKS INSTEAD OF WHEELS, AND WAS BACKING OUT OF THE #7 ENTRY ON THE 002 SECTION PREPARING TO MOVE TO THE #8 ENTRY. HE LOST HIS FOOTING AND SLIPPED AND THE ROOFBOLTER CAME DOWN ON HIS LEG.

Employee was filling in for absent RB operator & had bent bolt to install, and was straightening it. Bolt hd. & chuck not aligned. Employee bumped rotation to align bolt & chuck; caused bolt to spin - plate struck right forearm caused injury. Employee taken to E.R. for treatment.

Employee bent bolt to install, feeding bolt into roof, bolt kick out of drill pot striking left wrist. Continued to work until 4-13-09. Went to Dr. then taken off work.

Employee was bringing a two piece drill steel out of the hole when the bottom part of the drill steel came loose and struck employee on left side of face causing a laceration. Employee was later told he had suffered a fracture to his left sinus.

Dozer was pushing mateiral down a slope for reclamation. When he ran over a rock causing dozer to loose traction and slide sideways. Dozer then turned over.

Employee was tramming an excavator up a hill and was turning onto a road when the cat slid down the hill and the excavator turned onto it's side. Causing the employee to hit his right shoulder on the bars across the inside of the window.

EE WAS GRINDING ON 850C DOZER BLADE WHEN HE FELT SOMETHING IN HIS RT. EYE. EE WAS WEARING SAFETY GLASSES AND HOOD.

EE WAS IN THE PROCESS OF REMOVING TRANSMISSION FROM A DM800 MACK TRUCK WITH ANOTHER MECHANIC. WHEN JACK WAS LET DOWN ENGINE SHIFTED CATCHING EE'S L INDEX FINGER. LACERATION & SMALL BREAK TO EN D OF FINGER. REQUIRING 4 STITCHES TO END OF FINGER.

INJURED WAS IN THE PROCESS OF BOLTING TOP WHEN A PIECE OF ROCK MEASURING 8" BY 11" THICK FELL STRIKING HIM ON THE LEFT HAND.

EE WAS PUSHING BRUSH AROUND SIDE OF HILL, HILL WAS WET AND MUDDY DUE TO RECENT RAIN, DOZER SLIDDOWN HILL HITTING TREE STUMP, TURNING DOZER OVERON RT. SIDE, CAUSING PAIN IN BACK AND NECK.

EE WAS OPERATING OFF SIDE ROOF BOLTER. HE WAS STARTING HIS TEEL AGAINST TOP WHEN IT KICKED OUT. IT STRUCK AN LACERATED HIS RIGHT CHEEK. LACERATION WAS APPROX ONE AND A HALF INCHES LONG AND REQ UIRED 10 STITCHES.

EE WAS DRILLING ROOF BOLT HOLE USING TWO-PIECE 6' STEEL. STEEL BROKE STRIKING HIS LEFT FOREARM,SMALL LACERATION AND SWELLING TO FOREARM.

EE WAS OPERATING A CAT D9L DOZER RECLAIMING THE OUTSLOPE ON THE MTR MINE. HE WAS PUSHING DIRT & ROCK UP THE SLOPE AND AS HE BACKED DOWN THE SLOPE HE RAN OVER SOME ROCKS. SHORTLY THEREAFTER HE STARTED EXPERIENCING PAIN IN HIS LOWER BACK, MOST LIKELY DUE TO REPEATED TRAUMA.

VICTIM BROUGHT ROOF BOLTS TO SECTION TO SUPPLY ROOF BOLTER. THE BOLTER WAS PARKED IN BREAK. THE INJURED, WHILE ATTEMPTING TO TRAM THE BOLTER OUT TO THE INTERSECTION FOR LOADING, WAS PINNED AGAINST THE RIB BY THE BOLTER CAUSING A FRACTURETO RIGHT FEMUR. HE WAS TRANSPORTED TO HOSPITAL WHERE HE UNDERWENT SURGERY TO SET HIS LEG.

WHILE PUSHING A ROOF BOLT INTO THE DRILLED HOLE, THE BELT WRENCH SLIPPED OFF THE BOLT, ALLOWING THE BOLT TO FALL. WHEN THE BOLT FELL, THE CORNER OF THE ROOF BOLT PLATE STRUCK THE RIGHT ARM OF THE ROOF BOLT MACHINE OPERATOR CAUSING A CUT ON THE FOREARM BETWEEN THE WRIST AND ELBOW.

EE WAS PLASTERING BRATTICES. WHILE PUTTING PLASTER IN HOPPER OF MACHINE, HOSE KINKED & PLASTER CAME UP OUT OF HOPPER, HITTING HIM IN BOTH EYES. NOTE: MINE IDLE FROM 12/22/00 TO 1/2/01.

EMPLOYEE WAS IN THE PROCESS OF INSTALLING PERMANENT ROOF SUPPORT WHEN A PIECE OF DRAW ROCK FELL STRIKING HIM ON THE LEFT HAND. THE ROCK MEASURED APPROX. 2' X 2' X 1".

EMPLOYEE AND ANOTHER WORKER WERE USING THE PARTSTRUCK ELECTRICAL CRANE TO LOAD 5 LIQUID NITROGENTANKS. THE TANKS WERE SET ON REAR OF BED WHEN EMPLOYEE WAS REMOVING THEM FROM THE CRANE AND SPIN NING THEM TO HEADBOARD TO BE SECURED. THE LAST TANK FELL WHILE SPINNING. EMPLOYEE ATTEMPTED TO CATCH THE TANK, USING HIS KNEE AS A SUPPORT.

EE STATES HE WAS FUELING HIGHWALL DRILL WHEN DRILL OPERATOR MOVED DRILL CAUSING HIM TO FALL.

EE WAS OPERATING A BULLDOZER WHEN THE BLADE SLIPPED FROM A ROCK CAUSING THE EE TO BE JOLTED.

EE CUT A TREA. THE TREE KICKED BACK, STRIKING HIM IN THE RIGHT LEG. EE WAS NOT SCHEDULED TO RETURN TO THIS MINE.

EE STATED HE WAS INSTALLING ROOF BOLTS WHEN HIS GLOVE WRAPPED AROUND DRILL STEEL.

EE WAS OPERATING A REMOTE CONTROL CONT MINER WHEN A PIECE OF DRAW SLATE FELL FROM THE MINE ROOF.

EE WAS ROLLING UP BELT WITH A HYDRAULIC BELT WINDER, WINDER TURNED OVER ON EE INJURYING BACK.

EE WAS OPERATING A BULLDOZER PUSHING OVERBURDEN FROM A DRILL BENCH. HE HAD COMPLETED A PUSH, PLACED THE MACHINE IN REVERSE AND BEGAN TRAMMING BACKWARDS, NOT KNOWING A ROCK HAD SLID OUT OF THE SHOT MATERIAL AND INTO HIS PATH. EE TURNED HIS BODY TO OBSERVE HIS PATH OF TRAVEL, WHEN THE LEFT DOZER TRACKS CLIMBED ONTO THE ROCK CAUSING A JOLT ACTION OF THE DOZER. THEN HE STOPPED AND TRAM

OPERATOR WAS CHANGING STEELS ON DRILL. HE WAS PUTTING PIN IN WHEN HE ACCIDENTLY HIT HIS ROTATIONLEVER WHEN THE STEEL TURNED AND MASHED HIS LITTLE FINGER ON RIGHT HAND. EMPLOYEE'S PROTECTIVE CO VERING AT TIME OF ACCIDENT: HARD HAT, GLOVES, HARD TOE BOOTS.

EMP WAS IN PROCESS OF INSTALLING PERMANENT ROOF SUPPORT WHEN A PIECE OF SHALE ROOF MATERIAL FELL

EMPLOYEE WAS INJURED WHEN A PORTION OF THE HIGHWALL SLOGHED. IT IS BELIEVED A VERY THIN CLAY VEING FAILED.

EMPLOYEE HAD DISMOUNTED A SCOOP AND SPOKE TO A FELLOW EMPLOYEE. AS THE CO WORKER TURNED AROUND, HE UNINTENTIONALLY SPRAYED A BRATTICED SEALANT INTO THE EMPLOYEE'S EYES. THE EMPLOYEE STATED HE COULD HAVE RESUMED HIS REGULAR DUTIES AFTER FIRST AID TREATMENT. WHEN HE AROSE FROM SLEEPING THAT DAY, HIS EYES WERE SWOLLEN & SENSITIVE TO LIGHT. EMPOYEE DIDN'T SEEK MEDICAL TREATMENT.

EE WAS HANDLING THE TRAILING CABLE OF A ROOF BOLTING MACHINE WHEN A BLOCK OF COAL WAS EJECTED FROM ONE OF THE TIRES OF THE MACHINE.

SUBJECT HAD BEEN WELDING PRIOR TO NOTICING IRRITATION OF HIS EYE. SUBJECT WAS NOT AWARE OF ANY EVENT CAUSING THIS IRRITATION. WAS SEEN IN EMERGENCY RM. OF A LOCAL HOSPITAL & ADVISED TO SEE E YE SPECIALIST. AN EYE SPECIALIST WAS NOT AVAIL.UNTIL 3/24/94. SUBJECT WAS SEEN BY THE SPECIALIST ON 3/24/94 & RETURNED TO WORK ON 3/25/94.

EYE WITNESSES STATED THAT THE SUBJECT WAS OPERATING A BULLDOZER ABOVE A LOADING PIT FOR A SHOVEL WHEN THE BULLDOZER TRAMMED OVER THE VERTICLE INCLINE.

RAISING WRENCH UP ON BOLTER, MR. LOWE WAS HOLD ING THE BOLT. WHEN THE WRENCH CAME UP IT CAUGHT HIS LEFT HAND AND PINCHED IT.

EMPLOYEE WAS TRAMMING AFLETCHER DDO ROOF BOLTER FROM A CROSSCUT INTO AN ENTRY WHEN THE ACCIDENT OCCURED. DURING THIS PROCESS, HIS RIGHT FOOT WAS ACCIDENTLY CAUGHT BETWEEN THE BOLTER AND THE COAL RIB. INJURED WAS SITTING IN THE OPERATOR'S COMPARTMENT WHEN HE RECEIVED THE INJURY.

SUBJECT WAS OPERATING A CONTINUOUS MINING MACHINE WHEN HE BECAME CAUGHT BETWEEN THE MACHINE & THE COAL RIB

SUBJECT WAS INSTALLING PERMANENT ROOF SUPPORT. AS HE LOWERED THE DRILL HEAD IT SET DOWN ON HIS LEFT FOOT.

ROCK FELL FROM TOP & HIT LEFT ANKLE.

SUBJECT WAS IN PROCESS OF INSTALLING PERMANENT ROOF SUPPORTS. AS SUBJECT WAS TIGHTENING ROOF BOLT PIECE OF COAL BECAME DISLODGED FROM ROOF STRIKING HIM IN LEFT EYE.

SUBJECT AND CO-WORKER WERE INSTAALING PERMANENT ROOF SUPPORTS IN A LEFT CROSSCUT OF THE NO 4 HEADIND ON THE 003 ACTIVE WORKING SECTION.A PORTION OF SHALE BECAME DISLODGED,STRIKING SUBJECT ON T HE HEAD,LEFT SIDE OF BACK AND LEFT FOOT.THE SHALE MEASURED APPROXIMATELY 2'X4' IN LENGTH AND WIDTH,FEATHER EDGE TO 3" IN THICKNESS.

VICTIM WAS OPERATING THE LEFT HEAD OF A DUAL HEAD ROOF BOLTER. HE GRABBED THE WRONG CONTROL LEVER AND SWUNG THE HEAD OF THE BOLTER INTO HIMSELF. VICTIM STATED THAT HE EXPERIENCED A SUDDEN PA IN IN HIS BACK WHEN THE HEAD PUSHED HIM TOWARD THE LEFT RIB.

VICTIM WAS CHANGING CUTTING EDGES ON BLADE OF A 16G GRADER. I,NAME BEGAN TIGHTENING THE BOLTS ON THE CUTTING EDGES BY HOLDING BOLT WITH HIS LEFT HAND AND USING AN AIR GUN WITH HIS RIGHT HAND. THE BOLT ROTATED IN HIS HAND, CAUSING A 1" LACERATION INSIDE OF LEFT HAND.

OPER DOZER, DOZER L TRACK TRAMMED OVER BOULDER BLADE SLAMMED TO GROUND

VICTIM AND CO WORKER WERE TRAMMING A ROOF BOLTER ACROSS THE SECITON WHEN THE ACCIDENT OCCURRED. EE WAS PERFORMING THE TASK OF HANDLING THE BOLTER S TRAILING CABLE WHILE OTHER WAS TRAMMING THE BOLTER. AS THE BOLTER BEGAN TRAMMING THRU THE LAST OPEN CROSSCUT BETWEEN NO 2&3 ENTRIES, HE RELAIZED THE BOLTER WAS ABOUT TO TRAM OVER THE CABLE. HE SPRANG FORWARD TO REMOVE THE CABLE AND FELT

VICTIM WAS OPERATING A TWIN-HEADED ROOF BOLTER WHEN THE ACCIDENT OCCURRED. WHILE DRILLING A HOLE FOR A ROOF BOLT, A PIECE OF SHALE DISLODGED FROM THE ROOF AND STRUCK HIM ON THE SMALL FINGER OF THE RIGHT HAND. THE RESULTING INJURY INCLUDED A LACERATION ON THE SMALL FINGER.

EMPLOYEE WAS PERFORMING ROOF BOLTING OPERATIONS WHEN THE ACCIDENT OCCURRED. HE COMPLETED DRILLING A HOLE IN THE ROOF FOR THE OUTSIDE BOLT AND BEGAN INSERTING THE ROOF BOLT INTO THE DRILLED HOL E. SUDDENLY A PIECE OF DRAW ROCK, MEASURING 3' X6' X 6" TO 4" THICK FELL, STRIKING I.NAME ON THE HEAD AND RIGHT ARM. THE FORCE OF THE BLOW KNOCKED I.NAME TO THE MINE FLOOR.

VICTIM WAS OPERATING CATEPILLAR D9H TRACTOR TO REBUILD A BERM AND CONSTRUCT A DITCH.HE BEGAN BY DIGGING ROCKS FROM THE FLOOR OF THE BENCH AND MOVING THEM APPROXIMATELY 15 TO 20 FEET TO THE EDG E OF THE BENCH.AS HE APPROACHED THE OUTER EDGE OF THE BENCH HE STOPPED HIS FORWARD MOTION AND ATTEMPTED TO SHIFT INTO NEUTRAL.INSTEAD HE SHIFTED FROM FORWARD TO REVERSE,THROWING HIM AGAINST T

OPER RF BOLTER WHEN ACC. OCC. THIN PC OF SHALE FELL FORM RF. AND STRUCK ON L. EAR.