Buscar en el registro

MMU001 No. 3 entry SS#3845. Employee had drill steel leaning against tray while installing a belt hanger, when he lowered the drill head the drill steel fell between the drill head and bottom causing the drill steel to bend and releasing striking employee on the right elbow causing a fracture.

The individual was roof bolting and misplaced a 5' piece of drill steel. The drill steel lodged in a fan bracket and when the individual swung the drill head out the drill steel flew up and struck the employee in the mouth. No medical treatment has been sought by the individual.

During roof bolting operations, the individual states he had his hand on canopy handle and when he swung the drill head out, the canopy came in contact with the roof mashing his left ring and pinky fingers.

The injured was drilling a roof bolt hole when the drill steel bowed out and struck his left hand. This resulted in a fracture to his hand.

The miner was pushing a roof bolt up into the roof bolt hole when he strained his lower back. The miner did not start missing work until 8-14-07.

EMPLOYEE WAS INSTALLING ROOF BOLTS IN #5 HEADING. HE WAS HOLDING HIS DRILL STEEL IN LINE TO START A BOLT HOLE WHEN HE STARTED DRILL ROTATION, THE STEEL CAUGHT HIS GLOVE AND TWISTED HIS LT. HAND, FRACTURING HIS LEFT THUMB.

The injured was preparing to drill a roof bolt hole. The jack was set on a small piece of rock and as the canopy was raised the rock broke. This caused the drill head to suddenly drop about 4 inches striking him on the head.

EE WAS INSTALLING ROOF BOLTS. WHILE PUTTING HEAD OF BOLT IN DRILL CHUCK TO PUSH BOLT UP AND TIGHTEN, HE SPUN BOLT CATCHING HIS GLOVE ON PLATE AND JERKING HIS RIGHT ARM.

INJURED WAS BOLTING #2 WHEN A ROCK MEASURING APPROX. 3'LONG X 2'WIDE X 1"THICK FELL ON THE OPERATORS CANOPY & SLID OFF & HIT OPERATOR ON SIDE OF HEAD & RIGHT SHOULDER.

EMPLOYEE WAS INSTALLING ROOF BOLTS, AND WHILE DRILLING HOLE, ROCK FELL STRIKING HIM ON THE RIGHT ARM.

EMPLOYEE WAS DRILLING A HOLE FOR A ROOF BOLT, A PIECE OF ROCK SLID DOWN DRILL STEEL STRIKING HIM ON THE LEFT FOREARM.

EMPLOYEE WAS BOLTING TOP WHEN A PIECE OF DRAW ROCK FELL FROM AROUND DRILL STEEL, STRIKING HIM ON TOP OF LEFT FOOT, BREAKING 1ST JOINT ON THE SECOND TOE.

EMPLOYEE WAS BOLTING TOP WHEN DRILL STEEL CAME OUT OF DRILL HEAD. WHILE HE WAS REINSTALLING DRILL STEEL BACK INTO HEAD, A SMALL ROCK FELL, HITTING HIM ON THE LEFT HAND.

EE WAS INSTLALING ROOF BITS IN #4 HEADING WHEN A PIECE OF DRAW ROCK FELL & HIT HIM ON THE LEFT HIP

EE WAS INSTALLING ROOF BOLTS AND MASHED HIS LITTLE FINGER ON THE RIGHT HAND. HE BROKE THE TIP END OF HIS FINGER AND HAD TO HAVE THREE STITCHES.

EE STATES HE WAS INSTALLING BOLTS WHEN A PIECE OF ROCK ABOUT 1 FT ROUND FELL HITTING HIM ON THE RIGHT FOOT BREAKING HIS LITTLE TOE.

EE WAS INSTALLING ROOF BOLTS WHEN A PIECE OF CAP CAOL ABOUT 1 FT THICK FELL FROM BETWEEN BOLTS THAT HAD BEEN INSTALLED THE CUT BEFORE. ROCK CUT THE TOP OF HIS HEAD. HE HAD TO HAVE 3 STAPLES.

EMPLOYEE WAS BOLTING TOP IN #6 HEADING WHEN A PIECE OF ROCK FELL DOWN AROUND DRILL STEEL HITTING HIM ON RIGHT HAND.

EMPLOYEE WAS INSTALLING ROOF BOLTS AND A PIECE OF ROCK FELL AND MASHED HIS RIGHT HAND AGAINST THE DRILL HEAD.

EE WAS INTALLING ROOF BOLTS AND WAS HIT IN THE FACE WITH THE DRILL STEEL ON THE SWINGING DRILL HEAD.

EE STATED HE WAS INSTALLING BOLTS AND A PIECE OF ROCK FELL STRIKING HIM ON THE RIGHT FOREARM. THE LACERATION REQUIRED 5 STITCHES.

EMPLOYEE STATED HE WAS INSTALLING ROOF BOLTS AND GOB GOT UNDER LEVER AND LET CANOPY DOWN ON HIS BACK.

EMPLOYEE STATED HE WAS INSTALLING ROOF BOLTS WHEN A PIECE OF ROCK FELL STRIKING HIM ON RIGHT FOOT.

EMPLOYEE WAS BOLTING TOP WITH A 3510 EIMCO DOUBLE HEAD DRILL. HE WAS RUNNING OFF SIDE. THERE WAS A PIECE OF DRAW ROCK ON THE BOTTOM NEXT TO DRILL HEAD. HE HAD HIS LEFT FOOT ON THE ROCK WHILE L ETTING THE DRILL HEAD DOWN. HIS FOOT SLIPPED OFFTHE ROCK AND HE LET IT DOWN ON HIS LEFT FOOT.

THE SECTION FOREMAN WAS PULLING CABLE AWAY FROM MINER AS THE MINER WAS BEING MOVED TO 5 PILLAR. THE CABLE BECAME TWISTED AROUND MINER OPERATORS RIGHT ANKLE AND TWISTED HIS KNEE.

HE WAS DRILLING WITH A HAND DRILL, INSTALLING REFLECTORS ON MAN TRIP.

EE'S LEFT FOOT WAS RUN OVER BY THE RT BACK TIRE ON THE S/R PINNER.

DRILL STEEL DROP OUT OF HOLE STRIKING EMPLOYEE ON FINGER, AGAINST DRILL HEAD.