Buscar en el registro

operating the 914 loader doing cleanup hit rough spot jamming back

EE was shoveling at the end of the Finishing Screen. A rock fell, hitting him on the right shoulder. He reported it to his supervisor. He said he was ok and went back to work. On 2/15/07, one hour before work time, he called in saying he was going to the doctor because his shoulder was hurting. The doctor excused him from work for 2 days.

Employee was going to the pit to haul shot rock. We had a lot of rain the day before. The road had been washed out underneath. The front of the truck dropped in the hole making a sudden stop. Employee hit her knees on the dash.

IW was stndng on the lft side of the trlr. The drvr chked the side mirror, he saw IW begin to walk away from the trlr. The drvr then noticed a pu truck approaching on the rt side. The drvr looked to see that the pu was not pulng in front of him. He then began to pull fwd. While pulng fwd he rechckd his mirrors and saw IW falling to the grnd. The drvr stopped the truck.

Employee was mounting the shaft and gear reducer on the belt winding equipment. He was using the front end loader with a chain to hold the gear reducer and the chain slipped off of the edge of the bucket.

EE WAS DRIVING STOCKPILE TRUCK AT #1 PLANT WHEN COMPLAINED OF LOWER BACK PAIN. HE BELIEVES THAT MOTION/RIDE OF TRUCK CAUSED HIM TO STRAIN LOWER BACK. EE HAD SEEN A DOCTOR BUT NO CONCLUSIVE RES ULTS WERE MADE. ON 6-4-02 EE CALLED IN & SAID THAT HE WOULD NOT BE IN (BACK WAS HURTING) & GOING TO DR'S OFFICE. DR SAYS HAS ABNORMALITY CALLED SPONDYLOLYSIS. MISSED 1 DAY.

EE WAS REMOVING THE TAIL GUARD ON M-74. UPON REMOVAL, THE GUARD GOT HUNG UP. EE CLIMBED UP ON THE BELT TO FREE IT AND WHEN HE WENT TO THROW IT OFF IT CAUGHT HIS COVERALLS. IT FLIPPED HIM OVER AND HE HIT AGAINST THE TAIL SECTION OF THE CONVEYOR AND THE GROUND.

EE WAS JOGGING A CONVEYOR BELT FORWARD TO MAKE A BELT SPLICE. A PIECE OF SAND WENT IN HIS EYE. EE WAS WEARING HIS SAFETY GLASSES.

EE WAS TIGHTENING BOLTS ON SHAKER AT DREDGE AND SAND FELL FROM ABOVE HIM AND GOT INTO HIS EYES.

CHANGED OX BOTTLE ON UNIT 36 PICK UP. EE WAS SITTING IN BED OF P.U. DRIVER OF TRUCK TOOK OFF TO PLANT AND BOTTLE FALL OUT RACK AND ONTO EE S RIGHT KNEE. TONS WAS NOT DRAINED PROPLEY.

HE TOOK THE WATER TRUCK, TO THE GRAVEL PIT TO WASH OUT THE TOP OF THE HOPPER. AFTER THE WATER TANK WAS EMPTY, HE GOT INTO THE TRUCK AND IT WOULD NOT START. HE TRIED TO PULL START THE TRUCK WIT H A FRONT END LOADER. THE TRUCK STARTED, THE THEAIR PRESSURE HAD BLEDOFF & THE BRAKES DID NOT WORK. TRUCK HIT BUCKET ON LOADER CAUSING STEERING WHEEL TO SPIN AND HIT LEFT THUMB.

INJURED WAS AT NOAH END OF PIT PULLING UP BEHINDOUTY BY HAUL TRUCK BEING LOADED. WHEN INJURED TRIED TO STOP HE SAID HIS BRAKING FAILED AND COULDN'T STOP. THE RESULT WAS RAMMING THE REAR OF OUT OF HAUL TRUCK #542 SHOVING RADIATOR BACK INTO ENGINE. DURING TIME OF INVESTIGATION NEITHER DRIVER SAID THEY WERE INJURED.

HE WAS IN THE PROCESS OF CHANGING THE FEED ON THE BELT. HE PUT HIS RIGHT HAND ON THE GATE SWITCH AND HIS LEFT HAND ON THE PIN. HE CLOSED THE GATE, BUT LEFT HIS RIGHT HAND ON THE SWITCH. WHEN H E STARTED TO PULL THE PIN OUT, HE ACCIDENTALLY TURNED THE SWITCH TO OPEN. HE COULD NOT GET HIS FINGER OUT OF THE WAY AND PINCHED IT BETWEEN THE GATE AND THE PIN.

HE HAD THE BOBCAT (UNIT #209) STUCK AT THE TAIL OF M-17A. A LOADER (UNIT #65) WAS GOING TO BE USED TO PICK UP HTE BOBCAT. HE WAS TOLD TO STAY AWAY BECAUSE IT COULD BUMP THE GUARD. HE BACKE D UP BUT HAHD HIS HAND ON THE GUARD. THE BOBCAT BUMPED THE GUARD AND PINCHED HIS FINGERS.

HE WAS FILLING THE SAND GATES WITH THE LOADER HETURNED ON THE AIR CONDITIONING & WARM AIR CAME OUT HE WAS STILL MOVING WHEN HE STUCK HIS LEFT HAND ABOVE HIS HEAD INTO THE AC VENT TO SEE IF IT WAS COOLING OFF HIS FINGERS WERE HIT BY THE FAN

HE WAS CLEANING UP SPILLED MATERIAL IN THE SAND TUNNEL A ROCK BOUNCED OFF OF THE CONVEYOR & STRUCK THE LEFT SIDE OF HIS HEAD & NECK

HE WAS FEEDING MATERIAL INTO THE FIELD HOPPER USING UNIT #65.HE WAS GOING UP THE RAMP WITH THE BUCKET OF UNIT #65 ALL THE WAY UP,IN ORDER TO DUMP INTO THE HOPPER.A ROCK FELL OUT OF THE BUCKET AND HIT THE WINDSHIELD BREAKING IT AND GLASS CAME INTO THE CAB AND CUT HIS LEFT HAND.

EMPLOYEE WAS USING A 743 BOBCAT TO MOVE AN ANGLE INTO A STORAGE RACK.THE CHAIN,USED TO MOVE THE ANGLE IRONS,BECAME UNHOOKED. A 4" X4" X 3/8"X20'ANGLE FELL AND STRUCK HIS LEFT FOOT.HE SUSTAINED BRUISES ON THE INSTEP OF HIS LEFT FOOT.

EMPLOYEE TURNED WIPER ON AND THEY WOULD NOT START.HE REACHED OUT OF TRUCK AND FLICKED WIPER ARM TO GET ARM STARTED.WIPER STARTED AND PINCHED INDEX FINGER BETWEEN WIPER ARM AND WINDSHIELD.