Buscar en el registro

While driving the front end loader toward a stock pile of material the left front tire ran over a large rock jolting the operator in the cab.

Left rear wheel came off of cart and lost control of vehicle, braced for impact when cart fish-tailed. Initially, a first aid incident, follow up Dr. appt July 1, placed employee on restricted duty.

Miner was checking a head pulley bearing on a stacker belt against his outlined duties and without prior instruction when he got his had caught between the pulley and the wiper causing a severe crushing injury to his right hand.

Backed over bolder with loader and jarred his back.

Driving pickup to job, stopping, seat slid forward unexpectedly, wrenching lower back. Seat was not latched in driving position. Driver new to pickup and unaware seat was not latched. Seat belt in use but attached to seat frame which moved with seat.

Miner was pulling a conveyer belt into place. A C-clamp grasped the belt, being pulled via a choker by a forklift. The clamp pulled loose and sprung back, striking the miner in the face. He had a lip laceration and minor contusion to his face.

Employee was operating a haul truck and hadn't notice a loader had stop to let him go by (both haul truck and loader were going in same direction). The haul truck's catwalk, on the driver's side, came in contact with the side of the loader bucket which pushed the hand rail of the catwalk through the driver side (open) window, which hit the employee on his nose and broke it.

While assisting another employee with unplugging a rock feeder, a rock, approximately 4" in diameter, came out of the poke hole, ricocheted and struck employee in the pelvic area causing a bruise.

Dusty floor.

Employee was operating a 50ton haul truck and had started dumping a load of sand when the haul truck leaned to one side at which time the operator retracted the bed of the truck which caused the truck to jerk. The operator complained of soreness to his back and shoulder.

Driving haul truck - back pain.

EE was passenger sitting in rear seat of 4-door truck. While driving from Service Yard, driver fell asleep and the vehicle idled into a tree on the left side of the road. Impact with back of front passenger seat bruised EE's knee (only reportable injury). Damage to left front of vehicle & windshield. Minor tree damage sustained.

Employee, not paying attention to safety precautions, bruised his hand. No impairment or broken bones.

EMPLOYEE GOT HIS GLOVE CAUGHT IN A MOVING CONVEYOR.

EMPLOYEE WAS DOING CLEAN-UP IN THE AREA OF #2B CONVEYOR (STAND AND CRUSHER UNDER BELT), WHEN A 4" - 8" ROCK CAME FROM ABOVE AND STRUCK HIM ON THE RIGHT FOREARM CAUSING CONSIDERABLE SWELLING AN D PAIN. HE WAS TAKEN TO DOCTOR.

DRIVING ON ROUGH ROADS ON THE EXPANSION NEAR THE5080 ELEVATION CAUSED JARRING OF THE NECK.

UNKNOWN AT THIS HIME SUPPOSED HE WAS REPORTED BACK TO HIS PRIMARY CARE PHYSICIAN BY THE ER. DR WAS FAXED EE HE HAD A ASHMASED BACK MUSCLE LOW TORN MUSCLE AND THAT HIS DR WAS RELEASED HIM BACK FOR WORK PREMATRELY EE ON DISABILITY FOR SKIN RASH RASH FROM THE AIFALY FROM THE MINE FOR TWO OR THREE MONTHS.

EE WAS REMOVING A LOOSE TIRE FROM EXTERIOR OF THE TIRE CHUTE. HIS ARM ACCIDENTLY CAME IN CONTACT WITH THE EXTERIOR WALL OF THE TIRE CHUTE CAUSING A BURN TO HIS LEFT FOREARM.

EMPLOYEE WAS USING A PORTABLE POWER UNIT TO LIFT A PIECE OF EQUIPMENT WHEN UNIT SLIPPED AND FELL ON HIS FINGER.

A TRUCK WAS BEING OFF LOADED BY A FORKLIFT. THE LEFT FORK GOT HUNG ON A PIECE OF METAL ON THE TRAILER. THE FORK BROKE FREE AND STRUCK THE EMPLOYEE JUST ABOVE THE CHIN, CUTTING A GASH IN IT. EM PLOYEE WAS TREATED AND RELEASED. WILL HOLD A SAFETY COMMITTEE MEETING WHEN EMPLOYEE RETURNS TO WORK.

COWORKER WAS INSPECTING THE DUMP TRUCK WHILE ENGINE WAS STILL RUNNING TO FIND AIR LEAK IN THE BRAKE SYSTEM. HE YELLED TO EE THAT THEY SHOULD SHUT THE TRUCK OFF. EE DID NOT HEAR HIM AND PROCEED E UNDER THE TRUCK WHERE THE POWER TAKEOFF DRIVE SHAFT PULLED HIM IN. COWORKER IMMEDIATELY TURNED OFF THE ENGINE, FOUND EE UNCONSCIOUS AND NOT BREATHING. COWORKER CUT AWAY JACKET AND EE STARTE

EE WAS DIGGING INTO BANK WITH LOADER, ROCKS HITTING LOADER CAUSED BACK STRAIN.

CLOSING VAN SLIDING DOOR WHEN DRIVER PROCEEDED TO MOVE FORWARD THEN BRAKED SUDDENLY CAUSING EE TO FALL FORWARD AND INJURE WRIST WHEN HE CAUGHT HIMSELF FROM FALLING.

THE EMPLOYEE WAS STANDING IN A 966-F LOADER BUCKET IN ORDER TO REACH THE FLASHING OF THE SCREEN FEED BELT AT THE CRUSHER. THE LOADER'S PARKING BRAKE WAS APPLIED AND WAS STABLE FOR APPROX. 20 M INS. FOR AN UNKNOWN REASON, THE LOADER STARTED MOVING AHEAD, PINCHING THE OPERATOR BETWEEN THE BUCKET AND THE CONVEYOR BELT. INJURIES TO THE EMPLOYEE WERE IN THE UPPER BODY.

OPERATOR WAS HAULING MATERIAL FROM 4810 TO 4900 BENCH WHEN OPERATOR LOST CONTROL OF THE VEHICLE. HE PROCEEDED DOWN THE HILL, A 14% GRAD, AND FLIPPED EQUIPMENT ONTO ITS RIGHT SIDE, THROWING HIM SELF AGAINST RT. SIDE OF CABL (INTERIOR).

A SEVICE TRUCK WAS STUCK AT THE TAIL PULLEYS OF THE FEEDBELTS OF THE UPPER WET PLANT. A FRONT END LOADER WENT TO PULL OUT THE SERVICE TRUCK. WHEN THE BRAKES FAILED TO COMPLETELY STOP THE LOADE R BEFORE HITTING THE SERVICE TRUCK. THE MAINTENANCE OPERATOR WAS GETTING A CHAIN OUT OF THE BED OF THE SERVICE TRUCK, WHEN THE IMPACT OF THE LOADER HITTING THE TRUCK MADE THE OPERATOR FALL IN

EE WAS CHECKING PULLEY ON A CONVEYOR BELT TO SEE IF IT WAS SQUARE WITH THE FRAME. MUD BUILUP ON PULLEY CAUGHT THE T-SQUARE EE WAS USING. EE PULLED HIS HAND BAKC, AND AS HEDID SO, CUT HIS LEFT INDEX FINGER.

WHILE CLEANING OUT THE HEAD PULLY ON THE GRIZZLY FEEDER, EMPLOYEE TURNED TO COME OUT FROM UNDERNEATH THE BELT. HE RAISED HIS RIGHT ARM AND HIS GLOVE BECAME CAUGHT IN THE ROLLER, FORCING HIS AR M THROUGH. HE SUSTAINED NERVE DAMAGE IN HIS ARM FOR WHICH THERE IS NO SURGERY BUT WILL REQUIRE THERAPY.

EMPLOYEE WAS CLEANING UP MATERIAL NEAR A CONVEYOR BELT. THE SHOVEL HANDLE HIT THE MOVING CONVEYOR BELT, CAUSING SHOVEL TO FLY UP AND HIT EMPLOYEE IN THE FACE.

OPERATOR DROVE BOBCAT INTO HOT FINE CLINKER HE BACKED OUT OF THE PILE & RAISED THE BUCKET ABOUT 4 FT WHEN THE BOBCAT STOPPED THE MATERIAL FLOWED OUT OVER THE BACK OF THE BUCKET LANDING ON THE OPERATOR

INJURED WAS DOING ROUTINE MAINTAINENANCE AROUND THE PLANT WHEN HE CAUGHT HIS HAND AND LOWER ARM IN A MOVIN GCONVEYOR.

EMPLOYEE WAS OPERATING 988 LOADER IN PIT FEEDING TELESMITH CRAWLER. HE BACKED UP AND RAN OVER A ROCK APPARENTLY STRAINING HIS BACK.

WHILE DIGGING OUT CIC TAIL SECTION , EE CRAWLED UNDER THE GUARD & WAS LAYING UNDER THE FEED BOX NEAR THE LAST RETURN ROLLER. THERE WAS 13" TO 15" FROM GROUND LEVEL TO BOTTOM OF GUARD. WHILE LA YING ON HIS SIDE UNDER A MOVING BELT EE WAS CHIPPING AT MATERIAL WITH A SHOVEL. THE MOVING BELT CAUGHT HIS SHOVEL PULLING HIS HAND/ARM INTO THE RETURN IDLER CAUSING A LACERATION.

EMPLOYEE WAS MOVING A LOADED RAIL CAR ON #2 TRACK FROM WEST TO EAST IN SWITCHING FROM #2 TO #1 TRACK THE CARS ON #2 TRACK LOCATED EAST OF THE SWITCH WERE TOO CLOSE TO #1 TRACK & ENGINE STRUCK THE LEAD CAR

THE EMPLOYEE WAS CLEANING THE FRAME WORK OF A CONVEYOR BELT WHEN A PORTION OF HIS ARM WAS ROLLED THROUGH THE TROUGHING ROLLER AND THE BELT. THIS ACCIDENT RESULTED IN A BRUISED LEFT FOREARM.

FRONT WHEEL OF TRUCK DUG IN AND TURNED SUDDENLY, CAUSING STEERING WHEEL TO TURN AND SNAGGING HIS HAND.

EMPLOYEE WAS DRIVING B-70 BACK TO PIT AS HE PASSED ANOTHER B-70 A ROCK WAS THROWN TO AVOID THE ROCK HE DUCKED BACK & HIT HIS HEAD ON THE REAR WINDOW

IN PROCESS OF DUMPING ONTO STOCKPILE,EMPLOYEE BACKED TOO CLOSE TO EDGE OF EMBANKMENT ON TOP OF FRESH MATERIAL.AS TRUCK BED RAISED,WEIGHT OF MATERIAL TRANSFERRED TO THE REAR WHICH CAUSED EMBANK MENT UNDER THE RIGHT REAR DRIVERS TO SHIFT AND THE TRUCK TO TIP ON ITS SIDE.

THE BOOM ON THE PRILL TRUCK STARTED TO SWING AND INJURED GRABBED IT TO PREVENT THE BOOM FROM HITTING CO-WORKER, WHO WAS NEAR THE BOOM. AS HE GRABBED THE BOOM, IT WAS HEAVY AND KNOCKED HIM OFF BALANCE, CAUSING HIM TO INJURE HIS LEFT ANKLE.

WHILE DRIVING B-70 EUCLID, EMPLOYEE HIT POT HOLE.

EMPL CLAIMS OPERATING HEAVY EQUIP CAUSED CHRONIC BACK PAIN. EMPL FIRST BECAME AWARE OF INCIDENT ON 10/22 CLAIM IS UNDER DISPUTE. LAST DAY WORKED 10/02

EMPLOYEE HIT BUMP IN ROAD WHILE DRIVING B-70 CAUSING SORENESS TO NECK.DRIVER DID NOT NOTIFY EMPLOYER OF INJURY UNTIL 10-03-90.

EMPLOYEE WAS STANDING ON FRAMEWORK OF A RUNNING CONVEYOR BELT WHICH IS AN UNAUTHORIZEWD RESTRICTED AREA HE WAS ATTEMPTING APPARENT LY TO CLEAN PULLEY THERE WAS FROM REPORT TRAUMA TO THE RT ARM WHICH RESULTED IN SURGICAL PROCEDURES

EMPLOYEE WAS PUSHING UP ON CONVEYOR WITH SHOVEL HANDLE SO TRACTOR EXHAUST COULD CLEAR. TRACTOR BACKED UP KNOCKING EMPLOYEE DOWN AND RUNNING OVER HIS ANKLE.

EMPLOYEE WAS TRAVELING LOADED FROM THE PIT TO THE PLANT. EMPLOYEE TOOK A CURVE IN THE HAUL ROAD TOO WIDE, WHICH CAUSED THE LOADED TRAILER PORTION TO GET IN MUDDY AREA AND START TO SLIDE.

DRIVING A LOADER AND IT STARTED GOING INTO A DITCH. AS IT DID SO, EMPLOYEE JUMPED FROM CAB LANDING ON THE GROUND ON HIS SHOULDER.

INJURED WAS ATTEMPTING TO SET HOPPER ONTO WELDING TABLE WITH FORKLIFT WHEN HOPPER TIPPED OFF FORK,STRIKING A PIECE OF FLAT BAR ON WELDING TABLE.FLAT BAR LEFT ON TABLE FLIPPED AROUND AND STRUCK INJURED ON LEFT SIDE OF HIS HEAD.

HAND SLIPPED OFF CONTROL FOR BOWL & HIT HOT HYUDRAULIC LINE WHILE OPERATING SCRAPER.

CHECKING TENSION ON 5RV WITHOUT DEENERGIZING MOTOR BELT TOOK OFF CATCHING FINGER BETWEEN BELT AND MOTOR SHAFT

DUMPING MATERIAL FORM LOAD BED UP EMP HEARD SNAP TRUCK OVERTURNED