Buscar en el registro

Employee was removing glass breaker from front end loader when it came loose and they accidentally struck the injured worker in the mouth, chipping two front teeth.

EE was reversing an L350H front end loader down the ramp that leads to the primary crusher. As the EE was reversing, EE cut the turn too close to the berm that lines both sides of the ramp. EE's right tires went on top of the berm, causing the FEL to tip over on its left side. EE sustained a dislocated left shoulder, and there was heavy damage to the left side of the FEL.

While backing dust truck up ramp to unload, miner got too close to right side berm and truck rolled over onto driver's side.

Employee was riding on the side of the lead car in a string of cars when EE slipped while dismounting and fell under the car. The car ran over EE's legs severing both legs.

While closing the right side window of 988G loader, finger was pinched in the closing mechanism causing laceration to the left hand pinky finger. This injury is reportable because the miner received stitches.

Employee was operating a front end loader when he ran over a rock. When the loader bounced he hit his head on the roof. He received a laceration on the left side of his head which needed sutures.

The injured employee was walking to the plant at the beginning of the shift. A second employee pulled up beside him in his personal vehicle to offer the victim a ride when he ran over his left foot. Injury was a fracture of the left foot.

Employee was cleaning snow from between the railroad tracks using a skid-steer loader when his bucket caught a splice in the rail, causing the loader to stop suddenly, injuring his back. Employee returned to work on 01/09 and then went back off work on 01/21.

Employee caught his right middle finger between the basket of the JLG Lift that he was operating and a conveyor frame, fracturing the tip of the finger.

The employee was walking along a string of 5 rail cars when a second employee, operating a pick-up truck in reverse, hit and knocked down the injured employee. The victim received only minor contusions.

Employee was standing on a platform over the top of the rail line inspecting when a car that was too tall struck the platform. The platform was pushed over by the car. The employee suffered a contusion of the chest wall and a left knee sprain and abrasion.

Employee was operating a skidsteer loader when he hit a bump and the seat bottomed out. This employee did not seek medical treatment until August 31. His first lost time day was August 31, 2010.

On top of truck repairing drive for auger unit on truck. Employee was running drive to check alignment on sprocket and chain. The unit was stopped so he could tighten set screw on key way for sprocket. The control was bumped and auger started to run, catching his index finger on left hand.

An employee was attempting to remove a rock from the tailpulley of the C-3 Conveyor. The injured employee reached into the tailpulley just as another employee jogged the belt. Lock-Out Tag-Out was not used.

Employee was running a front end loader and felt a pain in his back. This accident was not reported as work related until 9/23/04. The case was litigated and was accepted as work related on 12/28/04.

WHILE RUNNING LOADER, WENT THROUGH A DIP IN THE ROAD AND HURT HIS SIDE.

WAS TRAMMING FRONT END LOADER FROM SHOT LOADING AREA TO STOCKPILE. BUCKET DUG INTO GROUND, STOPPING LOADER. IMPACT BROKE LOADER DUMP CYLINDER & A PIECE OF WHICH STRUCK WINDSHIELD OF LOADER. OP ERATOR WAS STRUCK BY FLYING GLASS.

WAS DUMPING LOAD OF MATERIAL ON STOCKPILE. EE APPARENTLY BACKED UP BERM ALONG RAMP WITH THE LEFT REAR TIRES, CAUSING THE TRUCK TO TIP OVER.

WAS TRAMMING TO CRUSHER WHEN ROCK ROLLED OUT OF BUCKET OF FRONT END LOADER. LOADER RAN OVER ROCK. EMPLOYEE FELT PAIN IN BACK AFTER BEING JOLTED INSIDE CAB OF LOADER.

REACHED AROUND BEHIND AND ABOVE TO ADJUST CB RADIO AND FELT A SHARP PAIN IN NECK AND UPPER BACK. NOT REPORTED AND NO LOST TIME UNTIL 12-20-01.

EE WAS LEAVING PLANT PROPERTY AFTER CLOCKING OUTAT END OF SHIFT. LOST CONTROL OF HIS PERSONAL VEHICLE CAUSING A ROLL-OVER. HE WAS EJECTED FROM VEHICLE.

CAUGHT FINGER IN FAN WHILE TRYING TO REPLACE VENT.

EMPLOYEE EXITING MANLIFT; DOOR CAME DOWN AND STRUCK HIS BACK.

WAS INSTALLING SKIRT RUBBER ON CONVEYOR, CAUGHT HAND, CAUSING LACERATION.

PUSHING FENDER ON WITH 4X4 AND BOBCAT LOADER, 4X4 ROLLED OVER, CATCHING RIGHT THUMB, REMOVING NAIL FROM THUMB.

A NATIONAL HAUL TRUCK LEFT THE STOCKPILE WITH TRUCK BED IN RAISED POSITION. IT CAUGHT OVERHEAD COMMUNICATION WIRES, BREAKING THREE POWER POLES. THE WIRES AND ONE POLE WERE PULLED ACROSS THE RO OF TO THE SOFFET AREA WHERE DAN HICKEY WERE WORKING, THROWING THEM TO THE GROUND INJURING THEM.

A NATIONAL HAUL TRUCK LEFT THE STOCKPILE WITH TRUCK BED IN RAISED POSITION WHICH CAUGHT OVERHEADCOMMUNICATION WIRES BREAKING THREE POWER POLES. THE WIRES AND ONE POLE WERE PULLED ACROSS THE RO OF TO THE SOFFET AREA WHERE DAVID HICKEY WERE WORKING, THROWING THEM TO THE GROUND AND INJURING THEM.

WALKED OUT OF MILL, DID NOT NOTICE TRUCK MOVING RAN OVER LEFT FOOT BREAKING IT, EE WAS WEARING STEEL TOED SHOES

CLEANING KEY WAY WITH BOB CAT CAUGHT HIGH SPOT ON FLOOR STOPPING BOB CAT SUDDENLY, THRUSTING EE FORWARDS AND BACKWARDS.

HIT FINGER ON SHIFTER OF LOADER JAMMING IT. MEDICAL TREATMENT REVEALED A FRACTURE AND WAS SUBSEQUENTLY SPLINTED.

DIRECTED A TRUCK BACKWARDS, BECAME PINCHED BETWEEN TRUCK & PRIMARY CRUSHER LADDER SAFETY ENCLOSURE.

WHILE INSTALLING A PULLEY, TURNED CATCHING LEFT PINKY FINGER BETWEEN B.R.G. & CONVEYOR ANGLE PRACTURING FINGER.

CLAIMANT R EPORTS TOO MUCK PLAY IN BOOM BUCKET ON FRONT END LOADER CAUSING MYOSITIS IN BACK

BACKING UP TO DUMP LOAD, FELT TRUCK DROP, CRACKING TWO VERTEBRAS

BACK TRUCK UP THE PILE, DIDN'T GET SQUARE AND TRUCK FELL.

FOREIGN OBJECT BLEW IN EYE, CAUSING, IRRITATION WITH RUBBING, WHILE RIDING IN A TRUCK.

EMPLOYEE WAS OPERATING A ROAD GRADER WHEN HE WAS REAR-ENDED BY A HAUL TRUCK WHICH WAS PULLING TO A STOP TO CLEAN MUD FROM WINDSHIELD.

54736YEE WAS DRIVING A TRUCK AND TURNED TOO SHORT. A FRONT TIRE CAUGHT A GUARD RAIL. STOPPING THE TRUCK AND CAUSING THE EMPLOYEE TO STRIKE HIS FACE ON THE STEERING WHEEL AND CUTTING HIS MOUTH. 03850EMPLOYEE STATED HE WAS WEARING HIS SEAT BELT BUT WAS LEANING FORWARD LOOKING AT THE MIRROR.

EMPLOYEE WAS OPERATING A BOBCAT SKID LOADER AND RAN OVER A ROCK, THE FRONT END OF LOADER TIPPED UP AND THEN BACK DOWN CAUSING HIS HEAD TO STRIKE THE ROLL CAGE AND JAMMING HIS NECK.

SKID LOADER TIPPED FORWARD HE REACHED OUT TO FRONT TO CATCH BALANCE HITTING GREASE ZIRK ON FRONT OF LOADER

CLEANING READY MIX TRUCK; CHUTE BECAME STUCK WHEN CONVEYOR TRUCK MOVED MAKING CHUTE FALL DEAD CENTER OF HEAD.

RIDING ON RAILROAD ENGINE WITH ANOTHER EMPLOYEE. WERE PUSHING CARS DOWN TRACK. OTHER CARS WERE SUPPOSED TO HAVE BEEN MOVED BUT WERE NOT. THE ENGINE RAN INTO 3 UNLOADED CARS.

HE WAS DRIVING A HAUL TRUCK UNLOADING STONE, WENT BACK TO THE MILL WITH THE BED STILL UP. THE BED STRUCK THE MILL AND THE FRONT END CAME UP OFF THE GROUND THROWING HIM INTO THE TOP OF THE CAB AND INTO THE WINDSHIELD. CAUSED BRUISED BACK, CHEST, AND STOMACH.

ATTEMTING TO SET EMERGENCY BRAKE AND HIT LITTLE FINGER LEFT HAND LACERATING FINGER.

EMPLOYEE WAS RIDING IN MOTOR VEHICLE WAS IN ACCIDENT AND EMPLOYEE HURT.

LOADING TRUCK LOADER TRUCK BEGAN TO ROLL BACKWARDS JUMPED FROM TO TRY AND STOP TRUCK AND LEFT FOOT WAS CAUGHT BETWEEN FUEL TANK AND LOADER TIRE

I WAS LOADING MY TRUCK AND I SLIPPED GETTING OUT OF MY TRUCK AND TRUCK STARTED TO ROLL AHEAD A LITTLE AND I TRIED TO PUSH THE BRAKE TO STOPIT AND I HAD ONE LEG IN AND ONE LEG OUT.

I WAS IN CHUTE 7O WORK ON FLIPPER GATE OF TYROCK SCREEN.ANOTHER EMPLOYEE STARTED THE SCREEN AND A ROCK EVIDENTLY FROM A DEAD BOX FELL DOWN AND STRUCK ME ON THE HARD HAT AND THE BACK OF THE N ECK. 3

DRIVING STORAGE3TRUCK AND STARTED TO TURN BY STOCK PILE.STEERING PIN BROKE AND STEERING WHEEL SPUN AROUND AND HIT RIGHT ARM WITH SPINNER KNOB.

CLAIMANT WAS CL9ANING UNDER PRIMARY BELT. RAKE CAUGHT BELT AND KNOCKED HIM BACKWARDS. HAD BEEN INSTRUCTED TO SHUT BELT OFF BEFORE CLEANING.