Buscar en el registro

EE was cleaning under secondary with dingo. EE pinched left wrist between the dingo and plant structure. Our telehealth service was called, and they determined the injury first aid. The telehealth followed up with EE several times. On 6/15, they recommended EE go to clinic. Clinic put EE on restricted duty with EE's left arm until 6/30. X-ray showed no broken bones.

Finger caught under crane cable after cable slack was winched taut resulting in a laceration requiring 6 stitches. Returned to full duty; no restrictions.

Employee was moving a section of 12" hose with the telehandler. They attempted to extend the boom out to place it down while on an uneven surface. The outriggers were not extended and the vehicle rolled onto its cab side. The employee was wearing a seatbelt but injured their leg from the impact of the rollover.

Employee was operating a Haul Truck when the truck bounced, causing injury to employee's back.

While lifting a gear with the crane on truck, chain jumped & hook on chain hit right wrist & thumb

WHILE TWO EMPLOYEES WERE WORKING OUT OF THE MAN BASKET EE'S HAND BECAME PINCHED BETWEEN THE CONVEYOR SLED AND THE MAN LIFT HANDRAIL. THIS MOTION REMOVED THE SKIN FROM THE TOP OF EE'S HAND TO EE'S FINGERS. EE WAS TRANSPORTED BY AMBULANCE TO CROZER HOSPITAL WHERE EE HAD SURGERY ON THE HAND

Injured employee was operating a quarry haul truck. For a reason not yet known the truck engine stalled on an incline. The truck rolled backwards onto a roadside berm and overturned on the passenger side. As a result the injured worker suffered a dislocated shoulder.

The injured employee was removing a gear box from a stacking conveyor. As the IE was standing on the conveyor, the conveyor frame broke and the IE was struck in the right arm by a hand shovel that became airborne. The injured employee received 11 stitches to his upper right arm.

GOING INTO SHOT ROCK PILE, EE'S TIRE WENT OVER SOME TOE AND HIS LOADER ROLLED FORWARD INTO A LARGE ROCK WITH HIS BUCKET, JARRING HIS BACK.

OPERATING WATER TRUCK. WHILE WETTING DOWN #5 BENCH, EE HIT A RUT (POTHOLE) AND JARRED HIS BACK.

NO SPECIFIC INCIDENT--BOUNCING AROUND IN LOADER/RUNNING LOADER.

EMPLOYEE WAS GUIDING THE PIPE WHILE LOADER OPERATOR WAS POSITIONING IT WHEN THE CHAIN SLIPPED OFF OF THE PIPE LANDING ON HIS LEFT FOOT/TOES. CRUSHED METAL SAFETY SHOE. HE WAS PUTTING PIPE TOGE

EE HIT A POT HOLE EARLIER IN THE DAY AND WHEN HE WAS PREPARING TO MOUNT LOADER HE REACHED UP AND AS HE GRABBED THE RAIL, PAIM SHOT THROUGH HIS LOWER LEFT BACK.

EE WAS EMPLOYEE AS A BELTMAN WHICH REQUIRED HIM TO OPERATE A TOYOTA SKID STEER LOADER. THIS MACHINE IS EUQIPPED WITH HARD RUBBER TIRES, OPERATIN GON FROZEN IRREGULAR TERRAIN BOUNCES OPERATAO R AROUND.

MAKING SLIGHT RIGHT TURN ALONG RAILROAD TRACK. EE HEARD A LOUD BANG AND FRONT END COLLASPED AXLE SPLIT APART. THE TRUCK DROPPED SUDDENLY STEERING WHEEL SPUN JERKING THE EE S LEFT ARM AND SHOUL DER.

HE WAS HAULING MATERIAL OUT TO OUT POND #2 LOCATION, BACKED THE HAUL TRUCK UP TO THE EDGE OF THE POND TO DUMP. WHILE IN THE PROCESS OF DUMPING, THE BANK OF THE BERM BROKE AWAY RESULTING IN THE TRUCK TIPPING OVER SIDEWAYS INTO THE POND. HE THEN CLIMBED OUT THE PASSENGERS SIDE OF THE TRUCK AND JUMPED OFF THE TRUCK RESULTING IN HURTING HIS LEFT.

REACHING OUT OF OPEN DOOR OF MACK TRIANGLE TO PULL HANDLE TO LOWER BOX OR TRUCK BODY, DOOR OF TRUCK SHUT ON LEFT WRIST CAUSING INJURY TO LEFT WRIST, MOVEMENT OF TRUCK CAUSED DOOR TO SLAM SHUT.

OPERATING A SKID STEER LOADER AND REINJURED HIS LOWER BACK. EMPLOYEE WAS RECOVERING FROM A PULLED BACK MUSCLE FROM AN INJURY HE SUSTAINED ON 9-1-92. THIS TIME HOWEVER LOST TIME RESULTED FROM H IS BEING BOUNCED AROUND IN THIS SMALL LOADER WHICH CAUSED A COMPRESSED DISC.

HAULING SHOT ROCK TO CRUSHER WITH PAYHAULER PULLED LEVER TO UNLOAD THE TRUCK PINCHED MIDDLE BACK

OPERATOR WAS MAKING R-4 RIP RAP WITH 966B LOADER WHEN THE LOADER'S HYDRAULIC FOR STEEING SYSTEM STARTED A JERKING MOTION SIDE TO SIDE WHICH IN TURN CAUSED EMPLOYEE'S NECK TO SNAP SIDE TO SIDE CAUSING DISCOMFORT.

GREASING HEAD PULLEY BEARINGS. EMPLOYEE WAS ON TOP OF THE BELT AND THE BELT WAS STARTED.

TRUCK COULD NOT BE STARTED,SUPERVISOR DECIDED TO PUSH TRUCK TO THE SHOP BY USING A 988 CAT LOADER.WHILE PUSHING UP A GRADE THE TRUCKS FROM WHEELS CAME SLIGHTLY OFF THE GROUND.WEIGHT OF THE TRU CK SHIFTED OFF OF BUCKET DROPPING CAUSING WHIPLASH TO THE DRIVER.

CLEARING CHUTE BLOCKED BY LARGE STONE EMPLOYEE HIT THE BUTTON TO JOG THE BELT & RT INDEX FINGER WENT BETWEEN T HE BELT & SHIVE

MOVEMENT OF TRUCK SEAT AGGITATED BACK CONDITION.

INJ EMPL SITTING IN 50 TON TRUCK BEING LOADED.LOADER OPER EITHER HAD BIG ROCK IN HIS BUCKET OR ROLLED BUCKET TO DUMP IT TOO FAST.TRUCK ROCKED SUDDENLY BOUNCING DRIVER IN SEAT.TRUCK DRIVER SUFF ERED PINCHED NERVE IN NECK.

CLEANING OFF THE R R TRACKS WITH THE LOADER THE BUCKET LIP STRUCK A RAIL JOINT THAT WAS RAISED SLIGHTLY THE LOADER & I NAME BUMPED THE RT SIDE OF HIS HEAD ON THE INSIDE OF THE CAB

EMPLOYEE WAS STANDING ON THE RUNNING BOARD OF HIS DUMP TRUCK. WHILE BED WAS BEING RAISED EMPLOYEE THREW LEVER FOR THE TAILGATE. HIS FINGER GOT CAUGHT BETWEEN THE LEVER AND THE CAB ENTRY HAND LE.