Buscar en el registro

Employee was operating a Haul truck when EE went over a mound of material at approximately 30mph. EE received friction burns and a lower back strain.

Loader operator was injured while driving loader on uneven grad the loader rocked from side to side and his right leg below the hip hit the metal bar support to the arm rest inside the loader. "This incident was just viewed as a first aid until a drain was applied to the bruise to aid in healing of the bruise."

Prior to shift, victim was walking from his personal vehicle to the office. Another employee driving personal vehicle did not see victim and struck him, shattering pelvis and breaking hip. Conditions were predawn with unprecedented fog, visibility 25-50 feet.

Employee was digging out the # 1 three inch feeder with a digging bar, a loader was digging out # 2 feeder when material on the northwest edge of feeder #1 sloughed off and caught his legs causing a right knee strain.

The employee was steadying the crusher distributor head as the crane was lowering to the crusher deck. As the crusher head leaned over, the chain slipped on the lifting eye pinching the employee's middle left finger between the lifting eye and the chain links. Laceration to finger requiring stitches, no lost time.

While transporting a manlift from the concrete batch plant to the primary rock plant the employee hit a curb. When the left front tire hit the curb the employee was thrown forward hitting his lower ribs on his left side on the manbasket handle.

Dumping fill dirt on grade, End-Dump trailer tipped over attached with Semi Tractor.

Hopper beneath S3-L had filled with rock dust when the shaker's bottom conveyor failed apparently due to the failure of the convyor's v-belts. The employee entered the hopper via the bottom or tail end to shovel out the plugged hopper. The material shifted inside causing the conveyor to move pinching the employee between spilled material and a hopper cross-brace.

ROCK STRUCK EE WHEN LOADER OPERATOR DROPPED LOAD INTO FEEDER. EXCESS ROCK WENT OVER FEED WALL WHILE EE WAS DOING DAILY GREASING. INITIAL RESULTS WERE FOR EE TO RETURN TO WORK FULL DUTY. ON 4/29/03, EE HAD NOT IMPROVED. FOLLOW-UP MEDICAL TREATMENT PRESCRIBED MEDICATION AND TIME OFF WORK.

DRIVING ROCK TRUCK, STRUCK ROCK IN THE ROAD CAUSING A JARRING TO THE NECK.

EE WAS OPERATING A FRONT-END LOADER AND FELT A STRAIN TO HIS LEFT WRIST WHEN HE SHIFTED GEARS.

WEIGHT OF MATERIAL ON BELT CAUSED CONVEYOR TO REVERSE. HEAD PULLEY & GEARBOX ROTATED IN UNISON, THE TENSION ON "COME-ALONG" INCREASED & GEARBOX ANGLE IN WHICH IT WAS ATTACHED CHANGED CAUSING HOOK OF COME-ALONG TO DISENGAGE. HOOK FLEW BACK AND STRUCK EMPLOYEE IN THE FACE.

INJURED EMPLOYEE WAS ATTEMPTING TO ADJUST A CONVEYER RETURN ROLLER BY REACHING THROUGH THE TRUSSSUPPORTS AND HITTING THE ROLLER WITH THE HAMMER.HE SWUNG AND MISSED WHICH CAUSED HIM TO PLACE HIS ARM NEXT TO A MOVING CONVEYER. THE BELT DREWHIS ARM BETWEEN THE BELT AND ROLLER.

EE WAS STRUCK BY A PIECE OF METAL THAT HAD VIBRATED OFF OF A CONVEYOR BELT. INJURY RESULTED IN SUTURES ANTIBIOTIC MEDICATION.

EE ADJUSTED AIR CONTROLLED SEAT, AS HE WAS DRIVING DOWN THE HAUL ROAD, HE HIT A BUMP CAUSING THE SEAT TO BE FORCED TO THE FLOOR CAUSING INJURY TO LOWER BACK.

WHILE OPERATING LOADER A ROCK FLEW HITTING WINDOW AND SHATTERING GLASS INSIDE OF CAB.

EMPLOYEE'S FINGER WAS CAUGHT BETWEEN V-BELTS ANDDRIVE SHEAVE RESULTING IN THE LOSS OF HIS FINGERNAIL.

EE WAS WORKING ON A CONVEYOR WHEN A ROCK BOUNCED AND STRUCK HIM ABOVE HIS RT EYE. EE WAS WEARING A HARD HAT.

INJURED WAS DRIVING IN HIS ASSIGNED TRUCK WHEN THE WELDS BROKE THAT ATTACH THE BACK AXLE TO THE TRAILER. WHEN THE WELDS BROKE THE TRAILER HIT THE GROUND CAUSING THE TRUCK TO COME TO AN ABRUPT STOP.

EMPLOYEE WAS REMOVING AN OVERSIZE ROCK FROM THE KUE KEN JAW CRUSHER. AFTER RIGGING A CABLE SLING AROUND THE ROCK, HE REMOVED HIMSELF FROM THE CAVITY OF THE CRUSHER. AS THE LOADER WAS LIFTING T HE ROCK OUT OF THE CAVITY, THE CABLE SLIPPED OFF THE ROCK. POLEVAULTING HIM HEAD FIRST INTO THE CRUSHER. HE FELL APPROX. 4 1/2 FEET.

TWO EMPLOYEES, WITNEE AND INJURED, WERE ASSIGNED TO INSTALL ADHESIVE STRIP LAGGING ON THE HEAD PULLEY OF THE F-9 CONVEYOR BELT. THE PROCESS REQUIRED THE CLEANING OF THE HEAD PULLEY OF DIRT AND DEBRIS, APPLYING ADHESIVE WITH A PAINT BRUSH TO THE SURFACE OF THE PULLEY AND THEN APPLYING THE RUBBERIZED STRIP LAGGING ONTO THE SURFACE OF THE PULLEY

EE WAS BACKING LOADER WHEN HE RAN OVER A CONCRETE BLOCK CAUSING THE BACK TIRE TO LIFT OFF THE GROUND. THIS CAUSED THE LOADER TO BOUNCE, RESULTING IN AN INJURY TO THE EE SHOULDER.

LOADER DROPPED ROCK IN FEEDER, 2 ROCKS HIT TOGETHER SHATTERED AND ROCK HIT HIM IN KNEE CAP

EMPLOYEE WAS INVOLVED IN AN JOB VEHICULAR ACCIDENT ON 8-28-89. AT THE TIME EMPLOYEE CLAINED HE STRAINED HIS ARM AND BRUISED HIS RIB, HE WAS NOT SEEN BY DOCTOR. ON 9-27-89 HE WAS SEEN BY DR ON INJURIES HE FEELS MAY BE RELATED TO ACCIDENT.

EMPLOYEE WAS DRIVING HIS BUNKER TRUCK IN THE STOCKPILE AREA AND HIT A POT HOLE (IT WAS DARK), HIS SEAT BOTTOMED OUT AND HE FELT A SHARP PAIN IN HIS LOWER BACK.

REMOVING JAW TOOTH FROM CONVEYOR.

EMPL BACKED HIS TRUCK IN ORDER TO DUMP MATERIAL AND BACKED TOO FAR CAUSING HIS TRUCK TO ROLL BACKWARD AND STRAIGHT DOWN AND THE TRUCK SLOWLY TURNED ON ITS R SIDE EMPL COULD POSSIBLY HAVE STRUC K DOOR OF CAB CAUSING DEEP BRUISE TO LOWER BACK AND R SIDE

EMPL DRIVING TRUCK THRU ROCK TUNNEL,TRUCK BOX WAS IN UP POSITION AND STRUCK TOP OF TUNNEL.THIS CAUSED EMPL TO BE BOUNCED AROUND INCAB AND HE STRUCK HIS LIP AGAINST OBJECT CAUSING LACERATION TO LOWER LIP.

EMPLOYEE WAS DR3VING HIS TRUCK IN THE YARD. EMPLOYEE STATES THAT THE DRIVERS SEAT IN HIS TRUCK HAS THREE ADJUSTMENT,NONE OF WHICH WORKED PROPERLY, FROM DRIVING AROUND WITHT HE SEAT NOT PROPERL Y SET, WHICH CA6SED HIS BACK TO HURT.