Buscar en el registro

Employee was clearing an area for a new refuse site when he stepped on a rock that was covered with leaves and slipped and fell.

Employee stepped on a piece of grating that was over a drain and it flipped up and he fell approximately 16 inches into the drain channel.*The reason the form was late was the time involved from the injury date (3/27/2004) & first day missed (5/12/2004) was questionable and we waited on a doctor report to confirm the injury*.

EE HAD HELPED HEAT A SHAFT TO REMOVE A STRUCK GEAR ONT HE CRUSHER ON THE FLOOR BETWEEN THE 1ST AND 2ND FLOORS OF THE PLANT. EE WAS RETURNING TO THE WORK SITE WITH A GRINDER WHEN HE LOST HIS BA LANCE AND FELL HITTING THE HEATED SHAFT WITH HISRIGHT HAND.

EE WAS CROSSING THE THICKENER RETURN LINE. INSTEAD OF CROSSING UNDER THE LINE HE WENT OVER THE TOP OF IT AND WHEN HE CAME OFF OF THE LINE HE TRUNED HIS RIGHT ANKLE. THE PIPE WAS APPROX. 40 INC HES HIGH.

EE WAS INSIDE OF THE ROTARY BREAKER PATCHING A HOLE AND LOST HIS BALANCE AND FELL.

EE WAS LINING A CHUTE AT THE ROTOR BREAKER. AS HE WAS STANDING ON A BOARD THAT WAS ACROSS THE CHUTE THE BOARD SLIPPED OUT AND THE EE FELL AND SLID DOWN THE CHUTE APPROX. 6-7 FEET.

EE WAS PUTTING PACKING IN A CLEAN COAL PUMP ON THE BASEMENT FLOOR WHEN HE STEPPED IN A DRAINAGE HOLE THAT WAS APPROX. 8-10" DEEP AND 12-14" SQUARE.

EE WAS MOVING A SET OF TORCHES THAT WERE MOUNTEDON A WHEELED DOLLY. AS HE BACKED UP HE STEPPED INTO A DRAIN THAT IS 16" SQUARE & ~1/2" DEEP AND FELL WITH THE TORCHES FALLING ON HIM.

EE STEPPED OUT OF HIS TRUCK ONTO A PLATFORM AT THE #1 MUD HOPPER. IT HAD BEEN RAINING & THE PLATFORM WAS MUDDY. AS HE STEPPED ONTO THE PLATFORM HIS FOOTING SLIPPED & HE TWISTED HIS RIGHT KNEE.

EE HAD REPORTED FOR WORK AT THE LAB ANBD WHEN HE STEPPED OUT OF HIS VEHICLE HE TURNED HIS ANKLE.

EMPLOYEE HAD PLACED A LADDER IN THE VIBRATOR CHUTE TO DO SOME REPAIR. THE LADDER SLIPPED AND FELL LETTING THE EMPLOYEE FALL DOWN THE CHUTE.

EE WAS AT THE ROTARY BREAKER WHEN HE NOTICED ROCK ON A BELT. THE ROCK WAS BEHIND THE TAILPIECE HE WENT INTO AREA & REMOVED ROCK AND WHEN HE RAIESED UP FROM BENT POSITION, HE STRUCK A IBEAM WITH HIS FOREHEAD Y

EMPLOYEE HAD CHANGED THE REFUGE FILTER OUT AND WAS CLIMBING DOWN WHEN HIS FEET SLIPPED AND HE PULLED OR JERKED HIS LOWER BACK. HE FELL APPROX 3-4 FT.

INJURED SAID HE WAS STEPPING DOWN FROM BELT STRUCTURE LEFT FOOT TRIP ON PULL CORD AND FELL INTO BRACE.

INJURED STEPPED OUT OF TRUCK AND ICE HAD FORMED ON STEP OF TRUCK. INJURED SLIPPED AND PULLED A MUSCLE IN HIS BACK.

EMPL;OYEE WAS STANDING ON THE FRAME OF THE CLEAN COAL VIBRATOR,TAKING THE SCREEN OUT.HIS FOOT SLIPPED OFF THE OUTER STRIP OF THE COAL DECK,CAUSING HIM TO FALL AGAINST THE SIDE OF THE VIBRATOR.

HE FIRST TWISTED HIS LEG KNEE WHEN HE STEPPED IN A HOLE IN THE FLOOR OF TRAILER WHERE GREASE IS STORED HOWEVER HE THEN RETURNED TO WORK AFTER THIS INCIDENT. LATER AS HE WAS DISMOUNTING HIS LOA DING MACHINE, HE STATD THAT HE FELL HIS LEG GAVEWAY INJURING HIS RIGHT SHOULDER.

WALKING THROUGH BASEMENT CHECKING THE 1 REFUSE BELT. SLIPPED FELL IN FILTER CAKE. INJ R HIP

SAID EMPLOYEE JUMP OFF RAMP SPRING LEFT ANKLE.

SAID EMP WAS UP2N SPRAY BAR IN TIPPLE ADJUSTING SPRAY SAID EMP SLIPPED ON PIPE AND FELL STRADDLE OF SAID PIPE

EMPLOYEE WAS IN3THE PROCESS OF TAKING CABLESFROM WELDING TRUCK DOWN THE BACK TO CATWALK AT REFUSE BIN HE SLIPPED ON THE WET GROUND & FELL FORWARD FALLING OVER THE HAND RAIL AT THE BIN LANDING ON THE CATWALK 3