Buscar en el registro

EE was adjusting the press when EE stepped back and slipped, falling to the ground. EE injured EE's ankle, knee and back and was put on light duty. Diagnosis pending.

When exiting the mechanic's shop, they rolled an ankle when they stepped from the concrete shop floor onto the gravel parking lot, resulting in a closed fracture on left foot.

Miner was hosing material from floor of wash pant tunnel when EE stepped backwards and rolled EE's right ankle.

Miner slid over side of dredge screen, slid down slowly so SRL did not catch. Caused contusion and neck / sternum strain.

Fell while walking through the wash plant area and sprained hand.

Employee fell from ladder while performing maintenance activities. The fall resulted in a ruptured disc in EE's back which required surgery.

Miner was grinding on the wash plant when EE lost balance, falling backward. EE leaned forward to compensate for the motion and landed the grinder from left hand onto EE's left hand. Causing a laceration.

Employee bent over to tie shoelace and tripped spraining right ankle. Employee was taken in for doctor assessment. Employee has sit/stand restrictions

Miner was walking through pit and tripped. Landed on knee. Went to doctor as precaution.

Freezing conditions over the weekend of December 17 & 18 created frozen and slippery ground. Shortly after the beginning of the shift, the miner was walking across the gravel mine, and slipped and fell on the frozen ground.

Miner was climbing into the cab of a front end loader and missed a step. EE stated this caused injury to the back. After the shift EE was seen by the Chiropractic Doctor, who excused EE from work, and released EE to full duty without limitations on 9/19/2016.

Miner had replaced a broken motor mount bolt on jaw motor. As he made his way from beneath the structure he fell against a steel beam. His left rib cage was sore so we had him looked and it was determined he had fractured a rib.

Sprained right knee stepping from work skiff to floating conveyor

Employee was putting on rubber and metal plates on wash plant while standing on the main feeder belt and eco block. Foot slipped off the main frame and eco block and employee fell backward onto the Grizzly motor frame. Employee did not go to Dr/Hosp until 5/31/14 with soreness. No broken bones, just bruised

Employee states he stepped in a hole on the surface he was working on. Employee states he fell and reached out with right hand and put strain on his shoulder. Employee DID NOT seek medical attention until on/about 8/19/13

Miner was working from 10' ladder when ladder moved and miner fell.

Miner was walking on wet concrete surface when he slipped and landed flat on his back. Resulted in Buttock Contusion/ sprain. X-ray taken and miner was put on light duty until X-ray could be reviewed. X-ray was negative and worker was returned to job of injury.

Employee slipped and fell onto posterior and left shoulder. Level concrete paved surface. Slippery due to inclimate weather.

Stepping down from loader. Missed a step. Fell to ground hitting head on step. Laceration to head with stitches.

Worker was using water hose to clean around hopper. Worker climbed up on side of hopper and subsequently fell backwards.

Miner was using a metal bar to dislodge a rock from under a hopper where it discharges onto a belt. The bar slipped and he fell backwards against the wall and fell to the ground. As he impacted the wall his hard hat was dislodged and caused a laceration to his right eyebrow. In trying to gain his balance he sprained both wrists and his left shoulder.

miner slipped and fell on a catwalk. Hard hat fell off during fall, striking head on conveyor support.

As he desended a slightly elevated walkway, his right leg slipped out from under him. He was unable to support himself with his left hand that was on the handrail. He fell down with his left leg twisted under him. The walkway and handrail were slippery. He was immediately taken to a medical clinic where they diagnosed his left ankle as broken.

While performing routine cleanup he noticed that the twin scrubber to the wash plant was plugged with mud. While attempting to climb up onto the edge of the scrubber his foot caught on a lip or bar and caused him to lose his balance falling into the scrubber. While trying to brace his fall with his left hand it struck the scrubber screw.

UNSCREWING A BOLT ON SCREENING PLANT, STANDING ON THE GROUND WHEN HIS FOOT SLIPPED & WRENCHED HIS BACK.

SLIPPED ON LOADER STEP WHEN GETTING ON LOADER.

WHILE WASHING DOWN A CONCRETE SLAB, EE STEPPED BACKWARDS OFF SLAB AND LANDED AWKWARDLY ON SURROUNDING GRADE.

WAS PULLING WASH DOWN HOSE ACROSS TOP OF EMPTY TUNNEL. STEPPED ON SOME ROCKS WHILE PULLING & TURNED KNEE, TWISTED & POPPED OUT.

CLIMBING DOWN FROM CAB, LOST FOOTING, CAUGHT SELF WITH RIGHT ARM.