Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
Employee was fire bossing at 72 brk. 2 South seal pump when he tripped over a 6 inch discharge line and fell into a sand prop that was set around the seal wing wall injuring right knee.
Employee was walking toward face from the power center on the 6 West section. After the employee got past the power center about a break, he slipped on the wet roadway and twisted his lower back.
Employee was going to help to unload vulcanize equipment at 3 South Head. In the process of stepping out of the battery motor he stepped on a rock, twisting his left knee, and fell face first to the ground.
Employee suffered a back strain when he slipped/tripped and fell onto the draw head of a low boy.
Employee was helping to move some shuttle car cable up on the 6 West Section. In the process of pulling on the shuttle car cable, the employee tripped on a rock causing him to fall against the rib, striking his right shoulder.
EE was assisting another employee carry a 60" top roller to a scoop insert. In the process of carrying the roller the EE stepped into the scoop insert to stack the top roller on top of another one. When the employee stepped in the insert he slipped on a 60" bottom roller causing him to fall, twist his right ankle, and to drop the 60" top roller on top of him.
Stepped on step of fuel tank on truck, falling resulting in broken leg.
Employee was walking around the power center on 19 HG Section. In the process of doing this, employees light cored got caught around the disconnect handle on the power center. This caused the employee to trip, striking his face on the power center. Employees tooth was knocked out.
Employee was dragging shuttle car cable by hand when he tripped over a piece of belt laying on the mine floor causing him to twist his left knee and ankle.
EE was hanging bolter cable across entry when he twisted his right knee. EE continued to work and was taken off work on 4/1/2015 to repair a torn ACL to his right knee.
Employee was moving miner cable out of the roadway. Employee picked up the cable and was walking backwards pulling the cable into a break through. The employee tripped and fell over a pressure pump striking the right side of his lower back on the corner of the pressure pump.
While surveying on the refuse embankment, victim twisted ankle and fell. Victim missed work following day to go to Health Care Clinic. X-ray indicated no breaks or cracks. Dr applied ace bandage and prescribed soaking in ice and ibuprofen specific follow-up visits and no restrictions.
Employee was carrying LW shear bits to the shear when he slipped on #5 LW shield relay bar, hurting his left ankle.
Employee was walking along 3 South Belt when he tripped over an unknown object and fell causing a laceration to his right elbow.
Employee was walking by the section power center and tripped over some cables. He reached out to catch himself when his had struck a rib bolt causing a laceration to his right hand.
He was walking into security building. A cat was in doorway, he tripped on cat, fell onto a chair and twisted left side and ribs and pain in neck.
Employee was untangling an emulsion hose when he pulled on it and fell to the mine floor straining his back. *Incident became reportable on 5/23/13.
Employee and a fellow was cleaning a tailpiece with a water hose. EE jumped up on the tailpiece to keep from getting wet. When he jumped off the tailpiece he felt a pop in his ankle. He felt pain but continued to work and finished the shift.
Employee stood on a piece of 6" water line to hang a piece of chain on a belt hanger and slipped and fell spraining his right ankle.
While changing belt rollers EE was carrying a roller to change when he stepped on uneven ground curling both ankles and falling down.
EE was walking along the longwall face and stepped into a depression in the mine floor causing him to fall onto his left wrist. EE was not diagnosed with a sprained wrist until 5/31/12 at which time a cast was applied for additional support.
EE was walking up steps to guard house, tripped and fell, fell onto porch, hitting her right shoulder.
While standing at the section power center a waterline busted, EE attempted to move away and slipped when he slipped he attempted to catch himself straining his left shoulder resulting in a torn rotator cuff. EE continued to work until 12/12/11 at which time he began missing work due to his injury.
Employee walking across gravel lot, slipped in gravel, felt pain in low back.
Employee alleges he stepped in a rut causing him to twist his right knee. *Filed under protest due to part 50 audit.
Employee was hanging continuous miner cable when continuous miner operator took up slack in cable knocking employee to the ground. *Filed under protest due to part 50 audit.
Employee alleged he twisted his right ankle while walking to elevator. *Filed under protest due to part 50 audit.
Employee was hanging continuous miner cable when the roof bolter operator took up cable slack and the cable knocked employee to the ground. *Filed under protest due to part 50 audit.
Walking out of security building when he stepped off last step onto ground - slipped on gravels and fell.
EE was pulling mine spray lineout of water hole. While pulling he stepped on wooded bridge by the hole. His foot slipped and he fell backwards. When he tried to catch himself his right hand struck something lacerating his middle and ring fingers. It could not be determined as to whether the bridge or the rock caused the laceration.
Employee was exiting a personnel carrier when the tip of his boot caught the edge of the personnel carrier causing him to fall. This incident did not become reportable until 11/29/10.
Employee allegedly fell on a flat car while unloading trash from it.
While trying to exit the elevator the employee fell onto the elevator floor causing him to fracture his left foot.
EE was walking around an end loader on the surface. He slipped on some ice and fell. This caused him to fracture his right foot.
Employee was installing water line & slipped and twisted ankle on another line.
EE exited mantrip and walked toward track switch. While turning to go to the switch EE felt pain in his right foot. He transported himself to the hospital where he was diagnosed with broke foot.
EE was helping unload some cable from a shield car and he tripped over the cable and fell causing a fracture to his left wrist,
EE twisted left knee.
Employee was retrieving splitsets that had been dropped into the sump area. When he was returning up the ladder to mine level, he untied and missed the hook off and fell back.
Employee fell approximately 3 ft off the take-up dolly frame, while trying to remove a set of 3/4 to come-a-longs.
Employee slipped and fell while standing/walking in a scoop bucket.
Employee was removing fish plates from track. He was using a 3/4" drive wrench. He stood on the wrench to try to break the nut loose. He fell and landed on track twisting right ankle.
EE was helping load belt structure on a track supply car when he slipped and fell injuring his back.
Employee was walking down track entry when his left foot tangled up in a metal band used to band cinder blocks. He fell injuring his ankle. Employee continued to work until 7-26-06.
VICTIM FELT LEFT KNEE POP WHILE WALKING ON UN-EVEN SURFACE.
HE SLIPPED ON A COAL PILE, HIT HIS HEAD ON CRUSHER MOTOR.
Pulling belt and slipped and fell. When he fell, he landed on his hand. He continued to work until 02/23/04.