Buscar en el registro

Freezing and thawing of highwall at portal

Miner operator was moving continuous miner, stopped, and ran into a truss bolt. he fell to the ground and got up and continued to work. He has had no type of medical attention and has continued to work his normal job duties until this date 12-10-2013. He states he is having neck pain from the injury and reports he is going to seek medical attention

The employee had left the face area and was walking to get on the mantrip. The employee slipped and fell hitting on both knees. There were no witnesses to the accident and the employee failed to report his injury until the following day at 6:30 a.m. by phone. The miner states he can't put his weight on his left knee.

Employee was helping move the continuous miner from one place to another. He bent over to move the miner cable, raised it waist high when he felt a sharp pain through his right shoulder, neck and arm.

The injured party was working at the #35 crosscut of the number 2 belt. He was attempting to throw a wooden pallet across the belt and felt a pop in his back. He completed this shift and returned to work on 08/27/2012 and he completed this shift. On 08/28/2012 employee called in and stated he was in pain and was going to see a doctor.

A piece of draw rock measuring 53 inches long, 35 inches in width, from 0 to 4 inches thick struck a miner. The injury caused a broken leg and dislocation from the left foot.

Walking in No 3 entry and bumped head into mine roof. Having pain in neck and left arm. Accident not reported until 5/29/12.

Employee was drilling starter hole and lost his drill bit in the hole. Employee put a roof bolt in the hole & spun it to push the bit up in the hole. While in this process a burr on the roof bolt caught the employee's glove wrapping his hand around the roof bolt.

Mashed index finger left hand on canopy post

EE picked up cable went to throw it against right rib and twisted on the ground.

EE slipped and fell tried to catch himself with his left hand bent his thumb back. EE sprained his thumb.

Putting up first bolt, a piece of rock (hand size) came down bolt and hit nose, cut across nose.

Hose loose on rotation motor, operator started rotation, shot oil in right eye.

Strained left shoulder while taking lugs off.

EE sat down at corner of intersection to eat lunch on mine floor. Cap coal fell on EE while proped up against rib.

Roof bolting operator was installing rope bolts in intersection and steel got hung, section foreman was helping pull drill steel with rubber gloves on and drill steel grabbed glove and twisted wrist.

Employee was installing roof bolts was drilling a hole and a piece of draw rock fell, hit canopy he was unless and bounced off and landed on right leg.

EMPLOYEE SAID A SMALL PIECE OF ROCK FELL AND CUT HIS RIGHT ARM WHILE HELPING MOVE ROOF BOLTER ACROSS SECTION. EMPLOYEE SAID IT HAPPENED BETWEEN #1 & #2 ENTRY. WAS NO WITNESS TO ACCIDENT, TOLD GEN MINE FOREMAN THAT WAS ALL THAT WAS HURT. WAS GIVEN 1ST AID AND SENT TO HOSPITAL TO GET STITCHES.

EMPLOYEE WAS BOLTING TOP WHEN A PIECE OF DRAW ROCK FELL OUT FROM BETWEEN BOLTS & HIT EMPLOYEE ON BACK OF HEAD PUSHING FOREHEAD INT O A ROOF BOLT & CUT HIS FOREHEAD

ALLEGED EVIDENCE OF BLACK LUNG.

EMPLOYEE WAS TROUBLE SHOOTING HYDRAULIC PROBLEM WHEN APPROX 2200LBS OF OIL PRESSURE HIT EMPLOYEES RT INDEX FINGER PUTTING A HOLE IN FINGER

WAS DRILLING HOLE IN TOP WHEN A PIECE OF DRAW ROCK FELL FROM TOP CUTTING EMPLOYEES LEFT PINKY

EMPLOYEE WAS HANGING MINER CABLE, PICKED CABLE UP & PUT ON SHOULDER & WHEN EMPLOYEE TWISTED AROUND HE INJURED HIS BACK.

ALLEDGED EVIDENCE OF BLACK LUNG.

TRACK MOTOR JUMPED TRACK EE WAS GOING TO PUT IT BACK ON THE TRACK WHILE USING A 5 TON JACK TO DO SO THE JACK BROKE CAUSING EE FOR INJURED BACK.

EMPLOYEE WAS HAULING COAL & HIT A HOLE IN THE HAULROAD & INJURED BACK

EMPLOYEE WAS COMING DOWN #3 ENTRY AND HIT A HOLE IN THE HAUL ROAD.EMPLOYEE BOUNCED UPWARD FALLING DOWN HARD JARRING EMPLOYEE.

EMPLOYEE STEPPED ON A HALF HEADER AND TWISTED HIS RIGHT ANKLE.

EE WAS BOLTING TOP WHEN HE REACHED TO GET A BOLT A PIECE OF DRAW ROCK FELL OUT OF THE TOP AND HIT EE ON THE LEFT HAND.

EMPLOYEE WAS BOLTING TOP WHEN THE WRENCH SLIPPED AND HIT EMPLOYEES WRIST.EMPLOYEE REPORTED THIS INJURY AND IT WAS RECORDED IN THE MINE ACCIDENT RECORD BOOK.HOWEVER THE EMPLOYEE NEVER RECEIVED ANY MEDCIAL TREATMENT NO WAS HE ABSENT FROM WORK.EMPLOYEE STATES HE IS NOW HAVING MEDICAL PROBLEM WITH WRIST.EMPLOYEE FIRST ABSENT FROM WORK 11-07-91.

ALLEGED EVIDENCE OF BLACK LUNG

EE WAS LIFTING A BLOCK TO BUILD A SEAL AND TWISTED AROUND TO LAY BLOCK AND PULLED A MUSCLE IN HIS BACK.

EMPL PUTTING UP OUTSIDE BOLT AND SWING HEAD INTO INSTALL INSIDE BOLT WHEN PIECE OF DRAW ROCK FELL OUT FROM INSTALLED ROOF BOLT TO RIB AND CAUGHT EMPL ON LEFT FOOT.

EMPLOYEE HAD A RATCHET AND SOCKET TIGHTENING UP A ROPE CLAMP WHEN THE CHAIN SLIPPED ONT HE TAILE PIECE JACK AND TURNED TAIL PIECE LOOSE AND SLID BACK ON EMPLOYEE'S BACK.

EMPL WAS SETPPING OFF PERSONNEL CARRIER & TWSITED KNEE. EMPL HAS WORKED EVERY SHIFT & WASN'T ABSENT FROM DUTIES UNTIL HE HAD SURGERY ON 3/4/91.

WAS REACHING FOR A WRENCH AND PULLED A MUSCLE IN BACK

STRAPPING KETTLE BOTTOM IT SLIPPED OUT GLANCED OFF CANOPY STRUCK HIM IN SIDE OF RIGHT FOOT BREAKING 3 BONES.

ON KNEES AND RE5CH TO GET PIECE OF DRILL STEEL AND WHEN TURN AROUND PULLED MUSCLE IN SHOULDER.

WAS BOLTING TOP3A PIECE OF DRAW ROCK FELL AND H IT BACK OF EMPLOYEES LEG

ON OCT. 86, EMP5OYEE WAS MOVING MINER CABLE ON PULLED A MUSCLE IN BACK, NEW THERE IS A DISK ON BACK THAT IS LYING ON A NERVE WHICH GOES TO HIS LEG THERE WERE NO EQUIP. OR ACCIDENT INVALVED.

WAS WAITING ON 3 NAME TO FINISH PLACING HIS BOLT DRAW ROCK FELL ON I NAME S FOOT.

GETTING READY T2 PUT OIL IN MINER & LIFTED THE 5 GAL.CAN OF OIL & STRAINED MUSCLE IN BACK.

WAS OPERATING B6GGY AND HIT A HOLE AND JARRED BODY AND STARTED HAVING PAN.

OPR BUGGY HIT HOLE IN RD & STRRAINED BACK.

STEPPED ON A CRIB BLOCK AND FELL AND TWISTED BACK.

WAS DRIVING UT-40 THROUGH FLY PAD AND THE CORNER CAUGHT LEFT EYE AND SCRATCHED IT

MUD SEAM RUNNING ACROSS TOP CAUSING BOLTS TO TAKE WEIGHT.

WAS THROWING CRIB BLOCKS FELL AND TWISTED BACK.

GOT THUMB CAUGHT IN SPLICE MACHINE

PUTTING REEL IN BUGGY AND REEL SLIPPED THROUGH WIRE ROPE AND CAUGHT FINGER AND BROKE IT ALSO CUT THE LEADER IN FINGER