Buscar en el registro

A ROCK APPROX 6' HIGH 2 THICK STARTED MOVING DOWN BULLDOZER SPOIL RAMP. EE WAS ON FOOT WITH A SHOVEL IN HAND AT THE BOTTOM. ANOTHER EMPLOYEE TRIED TO GET HIS ATTN & COULD NOT. ROCK FELL OVER S IDEWAYS & HIT HIM. IT WAS DRY & SUNNY.

THEY WERE BLOCKING C.BLOCK UP SO THEY COULD WELD ON IT. HIS FINGER GOT BETWEEN THE BLOCK & THE STEEL, CUTTING THE END OF HIS RIGHT HAND MIDDLE FINGER. IT IS ALSO BROKEN. IT WAS CLOUDY & FAIRLY DRY.

WAS CHECKING CONTROLS ON #278 #362 AND #346 JOBS WITH 4 WHEELER. GOING UP A BACKFILL FELL INTO A DITCH WHEN TRIED TO GET OUT THE 4 WHEELER CAME BACK OVER TOP OF ME. PINNING ME TO THE GROUND, IT WAS WARM, CLEAR AND DRY.

EE WAS HAULING ROCK TO THE DUMP ON TRUCK #837 WHEN HE BACKED TO THE EDGE, THE BANK GAVE WAY UNDER RIGHT REAR TIRES. THE TRUCK RAISED UP AND TURNED SIDEWAYS & ROLLED DOWN OVER THE DUMP WHICH WA S ABOUT 30 FT HIGH. IT WAS DRY THAT DAY.

MOVING HYD PUMP INTO POSITION IN D9L HURT BOTTOMRIGHT SIDE BACK. IT WAS DRY AND SUNNY.

WHILE EE WAS WORKING ON D11 #793 HE LIFTED A PANEL UP TO PUSH IT ON AND PULLED SOMETHING IN HIS BELLY. WAS SUNNY & DRY. HE WENT TO DOCTORS AND HE HAS A HERNIA. HE WORKED UP UNTIL 6/20/02. SURG ERY WAS ON 6/21/02 & IS CURRENTLY OFF.

WAS CLEANING COAL WITH 992 #418 WHEN THE SHEEL BRAKE WENT IN AUGER HOLE, THROWING EE SIDE WAYS INJURING HIS BACK LOWER. IT WAS COLD AND SNOWING.

EE WAS ON THE GROUND WALKING ALONG SIDE OF SVC. TRUCK, HIS FOOT GOT CAUGHT IN AUTO CRANE CONTROLCABLE, HE TRIPPED, FALLING ON A FROZEN LUMP OF DIRT. HURTING HIS RIBS- MORE HIS LT. SIDE THAN HIS RT.. IT WAS SUNNY, MUDDY ON TOP-GROUND STILLFROZEN.

WHILE HELPING TO REPR. THE FINAL DRIVE ONT HE 245 CAT EXCAVATOR 393 RICH STEPPED FROM THE COUNTER WEIGHT TO THE CATWALK. SLIPPING ON SOME ICE AND FELL TO THE GROUND. HE FELL APPROX. 5 FT. LAND ING ON HIS BACK. IT WAS SNOW COVER, SOME ICE ANDFROZEN MUD.

WHILE TRIMMING A WIPER BELT ON THE COAL SCREENER#840 THE UTILITY KNIFE HE WAS USING SLIPPED CUTTING RIGHT HAND BETWEEN THUMB AND FIRST FINGER. GOT 3 SUTURES.

EE WAS INSTALLING A REAR IDLER ON A D5 LGP CATERPILLAR BULLDOZER (MACHINE #712), WHEN A PIECE OF DIRT BLEW OR FELL INTO HIS RIGHT EYE. HE FINISHED HIS SHIFT, RETURNED TO HIS HOME THEN WENT TO THE DOCTORS. SITE CONDITIONS WERE DRY, WINDY & SUNNY.

TWO EMPLOYEES WERE CHANGING THE HAND-BAR SEAL ONA DOZER. ONE DECIDED TO USE COMPRESSED AIR TO CLEAN OFF THE TRACK FRAME. HE FAILED TO TELL THE OTHER TO MOVE AND AS DIRT WAS BEING BLOWN OFF THE TRUCK FRAME THE OTHER EMPLOYEE JUMPED STRIKING HIS HEAD ON THE DOZER FENDER, SPRAINING HIS NECK

EE & COWORKER FINISHED REPAIRING THE D11N CAT DOZER (MACHINE #546). COWORKER WAS HANDING TOOLS DOWN TO EE TO PUT AWAY IN HIS MECHANIC'S TRUCK. AS EE TURNED TO GO TOWARDS HIS TRUCK, HE LOST HIS FOOTING ON LOOSE ROCK CAUSING A TWISTING MOTION TO HIS BOFDY. HE HAD SEVERE PAIN IN HIS LOWER BACK. SITE CONDITIONS WERE DRY, WARM, AND HUMID.

EE WAS STARTING TO SERVICE HIS ASSIGNED MACHINE, A CATERPILLAR 6578 SCRAPER TRACTOR (MACHINE #123). WHILE GOING TO THE OIL SUPPLY (WALKING ON THE GROUND), EE LOST HIS FOOTING (SLIPPED) AND FEL L ONTO THE GROUND INJURING HIS LEFT THIGH, RIGHT SHIN, RIGHT SHOULDER AND RIGHT ARM. SITE CONDITIONS WERE WARM, WET GROUND CONDITIONS.

EMPLOYEE WAS CLEANING THE GEAR BOX AUTO CRANE WHICH IS A PART OF MECHANIC TRUCK. THEY WERE USING COMPRESSED AIR WHEN A PIECE OF SMALL METAL CAME IN BEHIND HIS SAFETY GLASSES AND EMBEDDED IN HI S EYE. HE FINISHED HIS SHIFT, WHEN GOT HOME HE THOUGHT HE HAD DIRT IN HIS EYE, WHEN IT WOULDN'TCOME OUT HE WENT TO THE HOSPITAL. SITE CONDITIONRAINY AND COLD.

EE AND OTHER WERE GRIDNING ON THE BLADE OF A D11N CATERPILLAR BULLDOZER MACHINE WHEN A SPARK CAME IN BEHIND EE'S WELDING HELMET AND SAFETY GLASSES AND EMBEDDED IN THE CORNER OF HIS RIGHT EYE. HE FINISHED HIS HSIFT, WHEN HE GOT HOME HE TOUGHHE HAD DIRT IN HIS EYE, WHEN IT WOULDNT COME OUT HE WENT TO THE HOSPITAL. HIS CONDITION WERE SUNNY AND DRY.

EMPLOYEE WAS REPLACING BELT ROLLERS ON THE EAGLE COAL CRUSHER, WHEN SOMETHING PULLED IN HIS MIDDLE BACK. SITE CONDITIONS WERE DRY, SUNNY IN THE MID 70S.

EMPLOYEE WAS HELPING OTHER EE REPAIR LIGHTS ON A D11M BULLDOZER (MACHINE #743) WHILE DISMOUNTING, HE JUMPED FROM THE TRACK, WHEN HE LANDED HE TWISTED HIS LEFT ANKLE, SITE CONDITIONS WERE DARK IN THE MID 40S.

EE WAS OPERATING HIS BULLDOZER. HE WAS RIPPING OVERBURDEN WHEN THE BULLDOZER SLIPPED OFF A LARGE ROCK & DROPPED SEVERAL FEET, JARRING HIS NECK & SHOULDERS. HE WAS WEARING A SEAT BELT.

EE WAS CLIMBING ONTO HIS ASSIGNED D11N BULLDOZER (MACHINE #545) AT THE BEGINNING OF HIS SHIFT. HE SLIPPED OFF THE STEP ON THE PUSHARM, STRIKING HIS RIBS ON THE TILT CYLINDER. SITE CONDITIONS W ERE SUNNY, MUDDY, MID 30'S.

EE WAS OPERATUNG MACHINE #621 992C LOADER. AT THE END OF HIS SHIFT HE WAS EXITING THE MACHINE, SLIPPED ON THE BACK FIRE AND JUMPED ONTO THE BATTERY BOX, BRUISING HIS RIGHT HEEL.SITE CONDITIONS WERE MUDDY AND COOL.

WHILE EXITING THE D11N DOZER MACHINE 597 EE REACHED FOR SUPPORT AND SLIPPED HITTING HIS RIGHT HAND ONT HE DOZER. IT DIDN'T SEEM LIKE ANYTHING WHEN IF HAPPENED BUT IT CONTINUED TO SWELL AND CAU SING MORE PAIN. ON 12-1-00 BONE IN HIS RIGHT HAND SITE CONDITIONS WERE COOL AND SUNNY.

INJURED WAS HELPING ANOTHER EE CHANGE OIL IN THE D11N BULLDOZER(MACHINE #573). EE WAS GETTING OUT OF THE MACHINE WHEN HE STEPPED OFF THE TRACK BACKWARDS AND FELL TO THE GROUND. SITE CONDITIONS WERE SUNNY AND WARM. EE WAS TAKEN TO THE HOSPITAL FOR X-RAYS.

EE WAS HELPING THE MECHANIC TO REPLACE A PIN ON THE HARD DRIVE FOR A D11N BULLDOZER-MACHINE #573. EE WAS HOLDING A HAND TOOL CALL A B + O WHILE COWORKER WAS HITTING IT WITH A SLEDGE HAMMER INO RDER TO DRIVE THE PIN OUT. WHILE COWORKER WAS MIDWAY THRU A SWING A PIECE OF MUD FELL HITTING HIS SLEDGEHAMMER THUS DEFLECTING HIS SWING WHICH HIT EE IN THE LEFT HAND, MIDDLE FINGER. 5 STITCH

EE WAS LOOSENING THE BOLTS ON A D11 FINAL DRIVE WITH AN AIR WRENCH WHEN HE EXPERIENCED PAIN IN HIS LEFT HAND. DR DETERMINED HE HAD A SPRAIN AND CARPAL TUNNEL WHICH IS RELATIVE TO HIS JOB AS A MECHANIC WHICH INVOLVES REPETETIVE MOTION. HE RETURNED TO WORK 8/29/00. OPERATION WAS SCHEDULED 11/22/00 & HE WORKED HIS SHIFTS UNTIL THIS DATE. THIS MATTER BROUGHT TO MY ATTENTION 12/20/00.

EMPLOYEE WAS OPERATING A CATERPILLER D11N DOZER WHEN HE EXPERIENCED SEVERE BACK SPASMS IN HIS LOWER BACK. SUPERVISOR WAS NOTIFIED BY THE TWO WAY RADIO.

EMPLOYEE WAS WELDING ON 992C LOADER MACHINE #621 BUCKET. HE COMPLETED HIS SHIFT WENT HOME HAD TROUBLE SEEING, WENT TO THE HOSPITAL, HE WAS WEARING HIS WELDING SHIELD. SITE CONDITIONS WERE SUNN Y.

EE WAS REPAIRING A TRANSMISSION LEAK ON A D9L BULLDOZER MACHINE #283, WHEN HE PULLED SOMETHING IN HIS LOWER BACK. THE SITE CONDITIONS WERE COLD, FROZEN, & SUNNY.

EE WAS HELPING THE MECHANIC PREPARE THE D11N TO WELD THE LEFT SIDE OF THE HARD BAR. EE RAISED THE DOZER UP IN ORDER TO CRIB UP THE TRACK FRAME. WHILE DISMOUNTING THE DOZER CAB, FROM THE LEFT S IDE, EE SLIPPED, FALLING ONTO THE TRACK FRAME, HITTING HIS HEAD ON THE TILT CYLINDER, SUFFERING A LACERATION TO HIS HEAD. THE SITE CONDITIONS WERE SUNNY, TEMP. OF 25 DEGREES, GROUND FROZEN.

OTHER WAS DRIVING CO TRUCK 641 WHILE EE WAS A PASSENGER DOWN THE HAULROAD-WHILE SHIFTING GEARS THE TRUCK ENGINE STALLED. THEY TRAVELED DOWNHILL APPROX. 334 BEFORE HITTING A BERM CAUSING THEM TO GO AIRBORNE FOR APPROX. 65'. THE VEHICLE STOPPED WHEN IT CAME IN CONTACT WITH A LARGE ROCK. BOTH EE'S SUFFERED BLUNT FORCE INJURIES, BUT WERE NOT EJECTED FROM THE TRUCK.

EE WAS DRIVING A CO TRUCK 641 DOWN THE HAULROAD, WHILE SHIFTING GEARS THE TRUCK ENGINE STALLED. OTHER EE WAS A PASSENGER. THEY TRAVELED DOWNHILL APPROX. 334 BEFORE HITTING A BERM CAUSING THEM TO GO AIRBORNE FOR APPROX. 65. THE VEHICLE STOPPED WHEN IT CAME IN CONTACT WITH A LARGE ROCK. BOTH EE'S SUFFERED BLUNT FORCE INJURIES, BUT WERE NOT EJECTED FROM THE TRUCK.

EMPLOYEE WAS REPAIRING BROKEN BOLTS WITH HAND TOOLS ON A FUEL TANK. HE STATES HE PULLED TOO HARDAND CAUSED A HERNIA. DID NOT SEE A DOCTOR UNTIL 8-2-99. HERNIA HAS NOT BEEN REPAIRED, AS YET THE AND EMPLOYEE IS STILL WORKING.

EMPLOYEE WAS CLEARING COAL WITH A 992C CATERPILLAR LOADER. THE BUCKET HIT A ROCK AND THE EMPLOYEE BUMPED HIS HEAD ON THE WINDSHIELD. HE WAS TAKEN BY AMBULANCE, GIVEN X-RAYS AND CAT-SCAN, THEN RELEASED TO RETURN TO WORK.

EE WAS ADJUSTING THE SEAT BELT IN DOZER WHEN HIS HAND SLIPPED OFF THE ARM REST AND HIT SIDE CUSHION BENDING BACK FINGER-XRAY WERE TAKEN, DIAGNOSED WITH TORN LIGAMENTS RIGHT MIDDLE FINGER.

EMPLOYEE WAS GETTING INTO HIS TRUCK AND MISSED THE HANDHOLD AND HELL FROM THE VEHICLE.

EMPLOYEE WAS STARTING A GASOLINE MOTOR TO FILL EQUIPMENT & STRAINED HIS BACK WHILE PULLING. HE IS BEING TREATED BY A CHIROPRACTOR.

THE ENGIUNE ON THE ROCK TRUCK HAD STALLED WHILE THE EE WAS RUNNING A FULL LOAD UP A HILL, THE BRAKES DIDN'T HOLD AND THE TRUCK ROLLED BACKWARDS & HIT A HIGH BANK & THE TRUCK ROLLED OVER 2 1/4 TIMNES. THE EE RECEIVED XRAYS & PAIN MEDICATION & MISSED 1 DAY OF WORK. INVESTIGATION HAS DETERMINE THAT SERVICE BRAKES WERE NOT BEING MAINTAINED IN A SAFE OPERATING MANNER.

THIS MECHANIC WAS REMOVING IDLER FROM TRACK FRAME ON CATAPILLAR 5230 EXCAVATOR, THE CHAIN BROKE AND STRUCK THE MECHANIC INT HE LEG. HE RECEIVED X RAYS TO CHECK FOR BROKEN BONES. PLEASE NOTE TH IS PERSON IS A MECHANIC FOR BECK WITH MACHINERY AND NOT AN EE OF HOWARD NEAL COAL CORP. HE RETURNED TO WORK AFTER X RAYS AT CLEARFIELD HOSPITAL .

EE HAD JUST TRAMMED THE 992C (MACHINE #426) TO THE PARKING LOT AREA & HAD EXITED THE MACHINE. WITH THE HELP OF ANOTHER EE HE ATTMEPTED TO ROLLA STEEL PIPE (15" X 7') INTO THE BUCKET OF 992C. W HILE THE EE WAS BENT DOWN ROLLING THE PIPE--HE FELT MUSCLES PULL IN THE SMALL OF HIS BACK. HE RECEIVED X-RAYS, MRI AND WILL SEE A NEUROSURGEON.

THE EMPLOYEE WAS CHANGING A TOOTH ON A 988 B LOADER, MACHINE #531. HE HIT THE END OF THE TOOTH WITH A HAMMER AND A SMALL PIECE OF METAL FLEW INTO HIS UPPER LIP. EMPLOYEE RECEIVED X-RAYS AND ST ITCHES. THE 1ST DOCTOR COULD NOT REMOVE METAL. HE IS SCHEDULED TO SEE A 2ND DOCTOR TO REMOVE METAL AFTER SWELLING DECREASES.

DRIVING A PIN OUT OF A TOOTH SHANK, WHEN HE HIT HIS THUMB WITH A SLEDGE HAMMER-X-RAYS TAKEN.

EE WAS CHARGING A MUFFLEWR ON A SERVICE TRUCK. HE WAS WEARING SAFETY GLASSES, BUT GOT A PIECE OF DIRT EMBEDDED IN HIS EYE. DID NOT BOTHER HIM TILL FOLLOWING DAY WHEN HE HAD TO HAVE A SPECIALIS T REMOVE IT.

EMPLOYEE WAS ATTEMPTING TO ASCEND HIS DOZER AT THE START OF HIS SHIFT. HIS FOOT SLIPPED & HIS KNEE HIT THE PUSH ARM,DID NOT FALL TO GROUND AS OTHER FOOT WAS ON THE GROUND. WORKED ENTIRE SHIFT WITH MINOR DISCOMFORT.

EE WAS DESCENDING THE CAT DOZER IN A SAFE MANNER. ACCORDING TO THE WITNESS, HE SLIPPED PRIOR TO PUTTING HIS FOOT ON THE LAST FOOT PAD ON THE PUSH ARM AND FELL BETWEEN THE TRACK FRAME AND PUSH ARM AND STRUCK HIS RT SIDE ON THE TRACKS, CAUSING INJURY TO RT ARM AND RIBS. EE WORE BOOTS.

EE OPERATES 992C HIGHLIFT AND R50 ROCK TRUCK. IT CLAIMS BECAUSE HE IS RUNNING THE MACHINERY CONSTANTLY, HE HAS INFLAMMED MUSCLES, LIGAMENTS AND JOINTS. EE SLIPPED AND FELL ON JOB 5-20-93, FEEL S IT IS A FLARE UP AT AN OLD INJURY. EE IS IN PHYSICAL THERAPY.

EMPLOYEE STATED THAT HE WAS GOING TO HIS FAMILY DR. FOR A SORE BACK. HIS FAMILY DR. SENT HIM TO A SPECIALIST FOR AN MRI AND CORTIZONE SHOTS. NO ACCIDENT, BUT EMPLOYEE FEELS IT IS DUE TO CONDIT IONS RELATED TO PROLONGED EQUIPMENT RUNNING. LOST DAYS DUE TO DOCTORS APPOINTMENTS ONLY. WE ARE AWAITING A DR.'S REPORTR AND DON'T KNOW IF IT ISWORK RELATED. ADVISED MSHA/INDIANA TO REPORT TH

EE WAS GETTING OUT OF THE CAB OF AN9L TO TAKE HIS BREAK, A5 HE STEPPED DOWN TO 1ST STEP HIS FOOT SLIPPED OFF STEP HE GRABBED FOR HANDRAIL. HE TWISTED AROUND AND HIT HIS RIGHT SIDE OF HEAD ON H ANDRAIL AND SPRAINED HIS LEFT ARM.

EE WAS PICKING UP A RIPPER TOOTH, WHEN HE WENT TO SET IT DOWN, HE SMASHED HIS FINGER TEARING OFF PART OF HIS FINGERNAIL, WHICH WAS REMOVED LATER BY A DR.

DRILLER WAS IN CAB OF DRILL. HELPER WAS PUTTING SUB AND 6 3/4" FINGER BIT ON DRILL STEEL. AFTER SLIGHTLY HAND-TIGHTENING THE SUB, OPERATOR STARTED SLOWLY ROTATING DRILL STEEL. BIT AND SUB ROLL ED OVER AND CROSS-THREADED, CATCHING HELPER'S SHOE AND PANT LEG. SHOE WAS TORN AND PANT LEG TWISTED AROUND SUB. HELPER RECEIVED A SPRAINED ANKLE AND BRUSH BURNS BEHIND CALF AND BEHIND KNEE.

EMPLOYEE WAS CHANGING A STEP ON AN ACCESS LADDER TO A 992 C LOADER. HE TRIED TO STRAIGHTEN A BRACKET OUT WITH THE HAMMER IT DISLODGED AND HIT HIM IN THE MOUTH, KNOCKING OUT 3 TEETH.