En todo el registro
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
CHIEF ELECT AND MINE FOREMAN WAS CALLED OUT AT 6:00 PM TO CHECK POWER PROBLEM. FOUND ROOF FALL TRACK ENTRY #2 BELTHEAD, FALL MEASURED 18' WIDE,BY 60' LENGTH BY 5' THICK. THIS AREA WAS BOLTED WITH 48" RESIN BOLTS.
EE WAS DRILLING TOP, DRILL STEEL WRENCH CAME OFF HEAD OF BOLT, MASHED LEFT HAND CAUSING LACERATION. WILL NEED SUTURES.
EE WAS CLOSING GARAGE DOOR TO SUPPLY ROOM, WHEN ROLLERS AND PINS BROKE OUT OF A SECTION OF THE DOOR, LETTING THAT SECTION OF THE DOOR COLLAPSE AND HIT EE IN THE BACK OF HIS HEAD AND NECK. Y
EE WAS GREASING UNIVERSAL DRIVELINE ON LOCOMOTIVE, PUT LEFT HAND ON U-JOINT TO ROTATE DRIVELINE AROUND TO GREASE FITTING. (EE DIDN'T HAVE PARK BRAKE SET.) LOCOMOTIVE STARTED FREEWHEELING, GLOV E CAUGHT IN U-JOINT WHILE LOCOMOTIVE WAS FREEWHEELING, CAUSING REMOVAL TO TIP OF LEFT RING RINGER.
EE WAS PUTTING HYDRAULIC PUMP ON 488 S & S SCOOP, FOOT SLIPPED ON OILY SURFACE TWISTED KNEE.
EE WAS OPERATING REMOTE CONTROL CONTINOUS MINER CUTTING FACE OF #9 ENTRY PIECE OF DRAW SLATE FELL FROM BETWEEN RIB AND ROOF BOLT STRIKING EE ON HEAD, RT SIDE OF FACE, AND RT ARM CAUSING LACERA TIONS.
EE WAS ATTEMPTING TO PULL DRILL STEEL OUT OF HOLE THAT WAS DRILLED. CAUGHT MIDDLE RT FINGER BETWEEN DRILL STEEL AND ROOF BOLTING WRENCH MASHING FINGER.
EE WAS OPERATING A REMOTE CONTROL CONTINUOUS MINER, WHEN A PIECE OF DRAW ROCK FELL FROM BETWEEN 2 ROWS OF BOLTS, STRIKING EE IN HEAD AND NECK. ROCK MEASURED APPROX 3 1/2' X 5' X 3".
EE WAS OPERATING A REMOTE CONTROL MINER WHEN A PIECE OF DRAW SLATE FROM THE ROOF FELL STRIKING VICTIM HEAD AND ARM. KNOCKING HIM TO MINE FLOOR.
ROOF FALL OCCURRED #5 ENTRY 2 BRKS IN BY SPAD 632, FALL MEASURED 17 FT WIDE BY 25 FT LONG BY 7 FT THICK. THIS AREA WAS BOLTED WITH 72" TORQUETENSION BOLTS. FALL DID NOT INTERFERE WITH MINE VENTILATION.
MINE FOREMAN MADE FIREBOSS EXAM, DISCOVERED ROOF FALL #5 ENTRY, 65' INBY SPAD 619. FALL MEASURED 40' X 18' X 8'. FELL ON TOP OF ROOF BOLTER. DID NOT INTERFERE WITH MINE VENTILATION.
ROOF FALL #6 ENTRY 1 BREAK OUTBY SPAD 456, FALL MEASURED 6' THICK X 18'WIDEX18'LONG. FALL DID NOT INTERFERE W VENTILAITON . DANGERED OFF & CRIBBED
DAY SHIFT PRODUCTION FOREMAN FIREBOSSING FACES, DISCOVERED ROOF FALL #3 HEADING. FALL MEASURED 65'LX12'TX19'W. FALL DID NOT INTERFERE WITH MINE VENTILATION.
INJURED WAS SERVICING CONTIONOUS MINER HYDRAZLLICS, PIECE OF DRAW SLATE FELL FROM ROOF 2" THICK X 8"X 12" STRIKING EE ON SHOULDER AND BACK. COAL HEIGHT 72".
BELT EXAMINER WENT TO START #3 BELT, DISCOVERED ROOF FALL ON BELT 3 BRKS INBY SPAD #576. FALL MEASURED 18'WIDE X 40' LONG X 7' THICK. FALL WAS IN BLOCK BETWEEN INTERSECTION. DID NOT INTERFERE WITH MINE VENTILATION. THIS AREA HAD BEEN FIREBOSSED BY 3RD SHIFT FOREMAN PRIOR.
3RD SHIFT FIREBOSS WAS MAKING PRESHIFT EXAM 7/6/99. DISCOVERED ROOF FALL #6 ENTRY 2BRKS OUTBY SPAD 597. FALL MEASURED 20'X40'X5'. DID NOT INTERFERE WITH MINE VENTILATION. FALL WAS CRIBBED AROU ND & DANGERED OFF
3RD SHIFT FOREMAN WAS MAKING PRESHIFT EXAM 10:005/31/99 DISCOVERED ROOF FALL 2BKS OUTBY FACE #1 ENTRY FALL MEASURED 18'WX240'LX5'THICK. BOLTED WITH 48" BOLTS RESIN,FALL DID NOT INTERFERE WITH MINE VENTILATION
WHILE TRAMMING WITH ROF BOLTER, ROOF BOLTER RAN INTO EMPLOYEE'S RIGHT KNEE.
ROOF FALL INTERSECTION BETWEEN #1, #2 & #3 ENTRY, 1 BK. INBY SPAD #592. FALL MEASURED 6' THICK X 19' WIDE X 100' LONG. FALL DID NOT INTERFERE WITH MINE VENTILATION.
MINER OPER. WAS CUTTING 4 HDG. WHEN ENCOUNTERED BAD ROOF CONDITIONS. FLAGGED S/CAR OPER. TO BACK OUT OF HDG. TO DANGER OFF. S/CAR OPER COULD VE MOVED S/CAR BUT JUMPED OFF AND FAN. FELL ON TOP OF MINER AND S/CAR. FALL MEASURED 18'WX70'LX4'T DID NOT INTERFERE W/MINE VENTILATION.
3RD SHIFT FIREBOSS MADE FIREBOSS RUN SUNDAY NIGHT. FOUND ROOF FALL AT 9:30PM #3 HEADING 1 BREAK OUTBY FACE SPAD #375. FALL MEASURED 19'W X 60'L X 6' T. ADDITIONAL ROOF SUPPORTS IS BEING USED
EMPLOYEE CUTTING A PIECE OF BELT WITH BELT KNIFE AND HAND SLIPPED STRIKING RIGHT INDEX FINGER.
ROOF FALL FACE OF #4 ENTRY INBY LAST OPEN CROSSCUT AND OUTBY FACE. FALL MEASURED 19'W X 40'L X 4 1/2T. 4' RESING BOLTS. MINE FOREMAN WENT TO A 5' BOLT.
MINE FOREMAN WAS TRAVELING #2 RETURN. FOUND ROOF FALL SPAD #57. FALL MEASURED 4' THICK X 19' WIDE X 100' LONG. THIS FALL DID NOT INTEWRFERE WITH MINE VENTILATION. THIS AREA WAS MINED IN NOVEM BRER, 1997.
MINE FOREMAN WAS TRAVELING RETURN FOUND ROOF FALL, 1ST RT. PANEL SPAD #110. FALL MEASURED 4' THICK X 19' WIDE X 70' LONG. THIS FALL DID NOT INTERFERE WITH MINE VENTILATION. THIS AREA WAS MINED IN JAN. 1998.
EMPLOYEE BOLTING TOP AND STEEL STUCK AND BENT DOUBLE STRIKING EMPLOYEE ON KNUCKLES.
INJURED HAD A SLATE BAR IN 10 TON RAILROAD JACK POSITIONING DISHCHARGE SHAFT ON FEEDER. BAR FLEWUP STRIKING HIM IN LT. JAW. (PUNCTURE REQURING SUTURES)
EMPLOYEE PULLING BELT STRUCTURE WITH WIRE ROPE AND ROPE SLIPPED AND CAUGHT EMPLOYEE ARM AND CHEST.
EMPLOYEE DRIVING A STEERING JACK PIN IN THE JACK ON 488 SCOOP AND HIT HIS FINGER WITH HAMMER.
EMPLOYEE SETTING TIMBER AND SAWDUST BLEW INTO EYE WHEN WIND BLEW.
EMPLOYEE LIFTING TIMBER WITH ANOTHER EMPLOYEE.
EMPLOYEE LIFTING TIMBERS ONTO SCOOP.
EE USING GRINDER TO SHORTEN ROOF BOLT INJURY WAS NOT REPORTED UNTIL 3/17/98
DRAW ROCK SLIPPED FROM TOP SCRAPING EE'S BACK.
EE INSTALLING 1 ST BOLT IN THE ROW WHEN DRAW ROCK SLIPPED BETWEEN RIB AND EDGE OF CANOPY.
EE DRILLING HOLE TO INSTALL BNOLTY WHEN A PIECE OF ROCK SLIPPED FROM TOP AND SLIDE DOWN CANOPY.
EMPLOYEE RAISED ARM TO PUT GLUE IN THE HOLE TO INSERT ROOF BOLT AND FELT PAIN.
EE KNOCKING SLAG OFF OF WELD WHEN FOREIGN PARTICLE ENTERED LEFT EYE.
EE TIGHTENING BOLTS ON CENTER OF SCOOP WHEN FELT PAIN IN LEFT SHOULDER.
EMPLOYEE REPAIRING MINER WHEN RIB ROLL OCCURRED. EMPLOYEE STOPPED WORK ON 10-7-97 BUT INJURY NOT REPORTED UNTIL 10-25-97.
HE WAS OPERATING BOLTING MACHINE IN #3 ENTRY. WHILE TRYING TO PUT BOLT IN DRILL HOLE, HE GOT HIS GOOT UNDER THE HEAD OF THE MACHINE. HE SAID HE NEEDED A LITTLE MORE CLEARANCE TO GET THE BOLT I N THE HOLE AND HE LET THE HEAD OF THE MACHINE DOWN ON HIS FOOT.
A ROOF FALL APPROX. 20' IN DIAMETER AND 5' IN THICKNESS OCCURRED IN THE SECOND OPEN XCUT OUTBY THE FACE IN THE NO. 3 ENTRY 180' INGY SPAD NO. 270 IN THE M.M.U. 002-0 SECTION.
EE RAN OVER HIMSELF WITH COAL DRILL.
SITTING IN OPEN BREAK BETWEEN NO.1 AND NO.2 HEADING. SHOT FIRER SHOT 1 HEADING. A LUMP OF COAL BOUNCED OFF RIB IN NO.1 HEADING STRIKING MAN IN LEFT THORACIC AREA OF BODY.