Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
While using an unapproved tool for personal use a laceration was sustained to right hand which resulted in medical treatment.
While employee was drilling a line broke under EE's feet filling up the cab with fumes. Employee seeked medical attention.
Employee was in the process of replacing panel when debris got in their eye.
Injury occurred on 12-04-24 and employee was evaluated by WC Dr. with no restrictions given. Employee was given restrictions one week later and employee missed scheduled shifts due to restrictions. A haul truck operator was being loaded by wheeled loader when a frost chunk was dumped into the bed. The operator complained of neck and shoulder soreness and headaches.
During Mine Rescue Training of the use of a highline system, member injured right elbow while pulling on the rope.
Employee stepped out of the back of a pick-up that was approximately 18 inches and rolled their ankle.
Operator was operating a dozer and haul truck during shift and started experiencing back soreness.
While riding in the passenger van to the equipment ready line, the van hit a bump bouncing the employee up hitting EE's head on the roof of the van causing an injury to EE's back.
Injury occurred 7-24-24 as a report only. Employee expressed that they weren't seeing any improvement requested to be seen 8-27-24. Employee continued to work scheduled shifts until 12-4-24. Scheduled surgery 12-5-24. Employee was air lancing in a chute at the crusher, got a sharp pain in their right shoulder
Process Maintenance Tech was walking on a road during a snowstorm then they slipped and when they landed, they ended up sitting on their right ankle. Update: EE did not miss any scheduled shifts nor given restricted duties. EE did not improve & requested to be re-evaluated. EE continued to work with no restrictions until 2-13-25 when surgery was performed to right ankle.
Maintenance Tech was reporting to work and slipped on ice which resulted in rolling right ankle.
Employee was holding a tagline for a generator being moved by an excavator. The generator swung and pulled the employee forward causing them to fall in front of the excavator track where their foot was caught between the track and the ground.
Loader operator was digging a bucket when the overhanging frost gave way causing a frost chunk to go over the trash rack striking the cab of the loader.
Driller pinched left pinky finger between the drill bit and drill hammer when they moved the hammer to apply a lifting bell. The hammer was positioned horizontal on a rack.
Driller was picking up sample bags from drill holes and felt a pop in right hip.
Maintenance Tech was maneuvering a hoist pump into place when their left thumb got pinched between the housing and a hydraulic hose resulting in a laceration.
While working in drive cabinet, the workers hand contacted a sharp wire-tie, resulting in a cut requiring 3 stitches to the top of middle finger on left hand.
Operator of light vehicle traveled through a dip too fast and caused the operator to raise in their seat and come down on their 2-way radio which was in their vest pocket.
Maintenance mechanic was using 4lb hammer to strike Allen Wrench with extension. When the extension was struck, the Allen wrench "popped" back contacting the technician's face resulting in a broken tooth.
Operator put valve on 2 inch water hose and turned on valve and pressure knocked employee off balance and fell and hit head and jammed finger.
Miner was walking from employee parking lot to report to shift and tripped and fell and caught fall with RT hand.
Operator was closing valve and felt back pain later that day.
IP was being trained in the use of a hose making machine when the trainer was demonstrating how to place dies. While in the process of closing down on the dies, an object struck the IP in the right shoulder.
Process operator was connecting water line to Hydrochloric Acid pump to flush pump for scheduled repairs. The PVC fitting broke and the operator was sprayed in the shoulder and face.
Haul truck operator was backing up to a shovel looking over right shoulder at mirror and hit a bump causing neck pain. Employee was evaluated at doctor and given restricted work and missed workdays.
Mechanic was working on a hose on a haul truck. While using an impact wrench the socket came off striking them in the mouth chipping their front tooth.
Operator was performing a pre shift inspection. While looking up some dirt or dust came down and got in Right eye causing a scratched Cornea. Employee was given prescription medication and missed two shifts of work.
PSES Operator was washing floors with water. There was some flock material on the ground and the operator did not see it slipping and falling injuring EE's right knee and left wrist.
Wash Bay employee was pulling some hoses when they slipped on some ice causing them to fall and injure elbow.
The employee ran into a door while trying to go through it hitting EE's face resulting in a chipped tooth.
Employee was operating a haul truck being loaded by a shovel, there was some large material and jarred the truck and the operator's back. The operator reported it and did not want to see a doctor at the time and on 12/27/2022 wanted to be seen as they felt it was not getting better. Operator was given restricted duty and prescribed a medication, operator has missed 0 days.
Driller assistant was in the process of tripping drill rods out of the hole. The EE placed the table wrench & break-out wrench in position as per standard procedure. This is when EE realized it was the last of the string. EE reached to remove the breakout wrench & this is when EE's middle finger was pinched between the table wrench & breakout wrench.
Employee was working in the ADR-1 cutting a zip tie with a fixed blade razor knife. It resulted in a laceration on the top of employee's thumb requiring sutures and restricted work.
Employee was on the raised portion of deck on haul truck opening door to get bags out, in doing so they rolled their ankle. Employee was evaluated by MRT and taken to be seen at workman's comp doctor where employee was diagnosed with a sprained ankle. Employee released full duty but has to wear an ankle brace as well as had 6 pt appointment's.
Employee was grinding and cutting in a shoot when EE received steel in EE's eye. Employee was wearing safety glasses and welding hood. Employee had to have the steel removed and drilled by medical professionals antibiotics where prescribed to avoid infection.
Employee was using a table grinder when tool caught and pinched finger
EE was walking on the sidewalk and slipped on ice, hurt their ankle.
Employee was stepping off a carbon truck when the employee missed or slipped on a rung of the ladder falling off the truck and landing on side. The employee suffered a nondisplaced fracture of the left hip. Employee was given restrictions and put off work.
Employee was getting into a confine space water tank when employee twisted and felt a pop in back followed by a little pain. IP was evaluated at a clinic and given restrictions, PT, and prescribed Lidocaine patches for pain.
Employee was removing an angle Iron brace when the weight shifted smashing the employees Left hand and fingers between a I beam. This resulted in lacerations to fingers requiring sutures as well as fractured fingers. Employee was given restricted work. Medication where prescribed as well
Operator tripped on sidewalk at the Ironclad falling and hitting face on handrail. Dry conditions and was at the end of shift. Employee received sutures for laceration.
A mechanic was installing a new dump body on a haul truck. During the process, the dump body shifted downward, trapping the hand between the bed pin and the object detection box, puncturing the center of the employees left hand. The puncture was in the center of the mechanics hand, penetrating through the thickness of the hand.
Maintenance was removing a brake valve in the center joint on shovel 425. Employees lowered the valve down on the frame pedestal, and disconnected the come-along to adjust the rigging. While re-hooking the straps the valve fell to the ground. The hoses caused it to spring back, contacted the ladder below EE's feet. The sudden movement caused a strain to EE's right shoulder.
An employee was driving a bulk truck down the 10% haul road in the snow to load holesa and hit a berm.
EE received a lacerated forehead when contact with the bumper after being struck in the back of head with the tailgate of a pipe truck while bent over picking up a nut previously dropped.
EE working in the weld shop twisted right knee when walking across floor. EE was seen at ER where they were given work restrictions and has missed shifts. EE had reported to others at the start of shift the knee was sore.
At approximately 2:30 pm the crew were in the process of tripping out the drill pipe, the removed rods were being placed in a rod basket, the driller helper placed a rod in the basket and in doing so the rod struck the end of the basket bouncing back toward the driller helper and caught the helper's hand between the end of the rod and the rod basket.
IP was working in the HG Mill moving a counter weight manually, the counter weight shifted unexpectedly and pinched the IP's right ring finger between the counterweight & its storage rack. This resulted in a small laceration requiring 3 stitches and the IP returning to work with restrictions.
IP initially reported aggravation of shoulder injury from 2011, upon learning that the claim could not be reopened, the IP reported having shoulder discomfort, which began approx. April of 2019, once the discomfort was reported to the company on 9/14/2020; a physician saw the employee, & prescribed restrictions, the employee has returned to work, under these restrictions.
Prior to start of shift on 9/9/20 IP was starting P198 in the North Employee Parking lot, upon exiting the cab of the truck and felt a sharp pain in back. IP refused to manage the injury through worker's compensation and went to personal physician. The IP's doctor did not feel the employee was able to return to work full duty.