Buscar en el registro

KNOCKING TOOTH OFF DRAG BUCKET WITH SLEDGE HAMMER AND B.T.O. HAMMER. PIECE OF TOOTH CHIPPED OFF AND WENT INTO OPERATORS LEG.

SMASHED FINGER BETWEEN CHUTE & SPAGE-CUTTING RIGHT MIDDLE FINGER

WAS LIFTING 2-15/16 BEARING UP ONTO A SHELF, IT SLIPPED OUT OF HIS HANDS AND FALLING ONTO THE RIGHT FOOT, BEHIND STEEL TOE BOOTS HE WAS WEARING.MR. PEPON IS AN OUTSIDE CONTRACTOR-INDEPENDENT.

WHILE LOADING ROLLERS ON A CONVEYOR, PINCHED LEFT RING FINGER BETWEEN THE ROLLER AND CONVEYOR.

EE WAS BENDING OVER AND FELT PAIN IN HIS LOWER BACK. THE PAIN GOT EXTREMELY WORSE HE WENT TO THE HOSPITAL AND WAS ADMITTED.

WAS PUTTING HYDRAULIC WEDGE IN 2 CRUSHER DOOR. HE GRABED THE WEDGE WHEN IT WAS MOVING AND SMASHED HIS LEFT HAND POINT FINGER TIP.

WAS CUTTING RUBBER BELTING FOR SKIRT RUBBER. HE WAS CUTTING THROUGH RUBBER BELTING WITH UTILITY KNIFE AND JAMMED KNIFE INTO HIS UPPER RIGHT LEG CAUSING LACERATION.

DIGGING OUT P2 TAIL PULLEY, SLIPPED ON ICE AND SNOW WHILE CLIMBING UNDER P2 TAIL. PAIN IN LOWER BACK AND RIGHT LEG.

MOVING CRUSHER HAMMERS FROM PALLET TO TRACTOR BUCKET AND PULLED MUSCLE-HERNIA.

WHILE PICKING UP 992C LOADER BUCKET PIN, PIN SLIPPED AND HIT THUMB - LEFT.

WHILE REPLACING V BELTS ON #2 PRIMARY DRIVE MOTOR, V BELTS WERE PLACED ON SHIEVE & HE WAS HELPING TO ROLL SHIEVE AROUND TO EVEN UP THE SLACK ON THE 2-5 BAND V BELT SET. THE TIPS OF THE GLOVE ON THE LEFT HAND CAUGHT IN THE BELT & PULLED THEFINGERS INTO THE SHIEVE & V BELT PINCH POINT.

WHILE WELDING GUARD BRACKET WELDING ROD STUCK TO BRACKET WHEN TRYING TO BREAK OFF THE ROD IT BROKWE & PUNCTURED LEFT ARM

CARRYING A COME A LONG INTO TUNNEL, WHEN COMEALONG SLIPPED OUT OF HAND, HE JERKED IT TO GET BETTER GRIP, AND HOOK HIT TOOTH.

PRYING SCREEN WITH A SIDE PLATE, WHEN THE SCREEN MOVED THE SIDE PLATE CAME UNDER CHIN CUTTING NECK.

WHILE TRYING TO HAMMER A WEAR PLATE IN PLACE, HE WAS GETTING HIMSELF IN POSITION AND HIT HIS SHIN ON A CROSS BEAM.

WHILE CARRYING OXYGEN TANK TO WORK TRUCK, SLIPPED ON ICE, TWISTED BACK.

TAKING TIN LID SEAL OFF ANTIFREEZE DRUM BUNG TINCURLED UP CUTTING LITTLE FINGER. 3 STITCHES.

WORKING ON L320 LOADER. FELL FROM ATOP LOADER. STRIKING HEAD ON THE GROUND.

WHILE SHOVELING 1 X 0 STONE, AFTER HIS SHIFT EXPERIENCED PAIN RT. ARM & SHOULDER. *THIS WAS NOT REPORTED TO EMPLOYER UNTIL 11/3/94

WAS CLIMBING DOWN LADDER OF L320 LOADER, SLIPPED AND FELL ON RIGHT FOOT THE WRONG WAY.

INJURED WAS HELPING DIG OUT CRUSHER BY GRABBING ROCK'S OUT SIDE DOOR. EMPLOYEES INSIDE CRUSHER WERE THROWING ROCKS OUT THE DOOR. INJURED STUCK HIS HEAD INTO CRUSHER & WAS STRUCK BY A ROCK.

PUTTING PATCH IN CENTER DECK OF WET MILL SCREENS WHEN CLIMBING OUT TWISTED SHOULDER (L)

CHANGING HAMMERS IN ROTER FOR CRUSHER. HOLDING THE WRENCH TO LOSEN BOLTS FOR WEDGES. EE HAD HIS HAND BETWEEN THE WRENCH AND THE ROTOR, INSTEAD OF PUTTING WRENCH AGAINST THE ROTOR. INJURING RIG HT HAND.

WHILE CHANGING HAMMERS IN CRUSHER #4 A WEDGE THAT HOLDS THE ROTOR FROM TURNING CAME LOOSE & LET THE ROTOR TURN, CAUSING THE HAMMER TO STRIKE RIGHT KNEE.

WAS TIGHTENING BOLTS ON DRY MILL SCREENS. HE WAS IN THE MIDDLE DECK TIGHTENING BOLTS WHEN SOMETHING GOT IN HSI RIGHT EYE.

ENTERING DRY MILL TOOL TRAILER, WENT TO PULL TRAILER DOOR OPEN SOMETHING PULLED IN HIS BACK.

WAS KNEELING ON THE BELT HELPING HOLD THE BELT UP SO WE COULD PUT A ROLLER BACK IN PLACE. WHEN HE STOOD UP HE GOT A SHARP PAIN IN HIS LOWER BACK.

WHILE CHIPPING AT A FRESH WELD, A WELD PIECE OGOT INTO RIGHT EYE.

WHILE LOADING CRIBBING ONTO THE BACK OF A PICKUP, ARM (RIGHT) WAS CAUGHT BETWEEN TWO OF THE CRIBBING BLOCKS CAUSING CONTUSION.

WHILE OPERATING GRADALL FORK LIFT, HE LIFTED CHAIN THAT WEIGHED 1292 LBS. AFTER LIFTING THE CHAIN INTO THE AIR, HE PROCEEDED TO BACK UP AND IN SO DOING, BACKED UP OVER A MOUND OF STONE FINES CAUSING THE MCAHINE TO UPSET. MACHINE FRAME CAUGHT AND BROKE RIGHT ANKLE.

INSTALLING WEAR PLATES IN SURGE BIN. EE TACK WELDED ONE CORNER IN PLACE, THEN PUT TENSION ON PLATE WITH CRANE TO LIFT OTHER CORNER UP. LOWER CORNER WAS HANGING UP. HE WENT TO TRIM THIS WITH A TORCH, THE TACK WELD BROKE AND PLATE SWUNG OUT, PINNING HIM TO THE OTHER SIDE OF THE HOPPER.

CLIMBING UP TO OPERATE 992C CAT LOADER.WHEN HE GOT TO THE TOP OF THE LADDER AND ON THE LANDING HE SLIPPED AND FELL INTO THE HAND RAIL WITH HIS UPPER RIGHT ARM CAUSING PAIN.HE SLIPPED ON FUEL T

WAS INJURED WHEN HE USED HIS CIGARETTE LIGHTER TO LOOK INTO TOOL BOX AT NIGHT. CAN OF WD40 HAD BEEN KNOCKED OVER AND WAS SPRAYING INTO THE BAX CAUSING A FLSH OF FIRE WHEN IT WAS IGNITED BY TH E LIGHTER.

USING AIR POWER GRINDER REPAIRING SPLICE ON 3 GALLEY BELT. DID NOT FEEL ANYTHING BUT MAN WORKING WITH HIM NOTICED RED SPOT IN EYE. AFTER THAT EYE BECAME SORE AND SWOLLEN.

WHILE TRYING TO DISLODGE A ROCK IN TAIL PULLEY ON CRUSHER FEEDER BELT, THE HEAVY STEEL BAR SLIPPED AND WHILE TRYING TO HANG ONTO THE BAR, IT STRAINED RIGHT SHOULDER.

STEPPING ACROSS BOARD PLACED OVER WATER PUDDLE. SLIPPED ON WET BOARD AND FELT PAIN IN LOWER BACK.

EMPLOYEE WAS TRYING TO DISLODGE LARGE ROCK FROM PRIMARY CRUSHER WHILE POKING AT IT A PIECE OF STONE HIT RT EYE CAUSING ABRASION

EMPLOYEE WAS MOVING BOXES ON TOP SHELF IN STORAGE ROOM SHE REACHED UP & AROUND A BOX & CUT HER FINGER ON THE METAL SHELF SHE TREATED IT ON THE SAME DAY BUT IT GOT INFECTED SO SHE HAD TO GO TO THE DOC & HAVE IT TREATED

EMPLOYEE WAS WELDING ON A WATERLINE AT 7X QUARRY. HE WAS WELDING AROUND THE PIPE AT THE BREAK. WHEN HE BENT OVER TO WELD UNDER THE PIPE HIS HELMET FELL OFF HIS HEAD AS HE STRUCK AN ARK AND THE WELDING FLASH HIS EYES.

EMPLOYEE WAS HELPING MOVE A SMALL SHANTY INTO #6 MILL. WHILE PUTTING IT UP ON THE DOCK IT STARTED TO TIP AND EMPLOYEE TRIED TO STOP SAME AND GOT KNOCKED OFF FROM THE DOCK. HE FELL APPROX. 4' A ND STRUCK HIS LEFT KNEE. HE DID NOT GO TO DOCTOR AT THIS TIME. AS TIME WENT BY, HIS KNEE STARTED TO HURT MORE AND MORE AND HE FINALLY WENT TO DOCTOR ON 11-12-91. DOCTOR SAID HE MAY HAVE A CRA

MAN WAS MOVING A HALF BARREL WITH OIL WHEN THUMB ON LEFT AHND WAS CUT.

THE EE WAS COMING OFF OF THE BOOM ON THE MANITOWOC 4600 CRANE TO THE ROOF OF A BLDG ON 10 DERRICK HE STEPPED ON A CABLE ON THE ROOF TWISTING HIS LEFT ANKLE.

EMPLOYEE PUTTING BREAKING HAMMER IN TOOL BOX. HE STEPPED ON A ROCK CAUSING HIM TO SLIP AND FALL DOWN. HE HIT HIS THUMB ON A ROCK, CUTTING IT.

WENT TO CHECK ONR IVER PUMP WAS RETURNING TO PLANT STEPPED ONT HE CONVEYOR. EMPLOYEE FELL FOR UNKNOWN REASON LANDING ON HIS LEFT SIDE. BRUISING HIP AND LEFT ARM ADN ALSO RIGHT ARM.

EMPLOYEE WAS PUTTING 1 1/2" BILGE PUMP HOSE IN HATCH OF BARGE. HATCH FELL STRIKING EMPLOYEE IN SHIN.

EMPLOYEE LIFTING SCRAP OUT OF STOCKPILE TWISTING BACK.

EMPLOYEE WAS PRYING UP ON THE CONVEYOR ROLLERS TO LEVEL THEM UP.THE BAR HE WAS USING SLIPPED AND HIT HIM ON THE UPPER LIP CAUSING A LACERATION.FIVE STITCHES WERE REQUIRED TO SEW UP CUT.

EMPLOYEE WAS TAKING 2 1/4IN ASHLAR OFF OF POWER ROLLERS WENT TO TAKE A PIECE OFF & HIS FINGER GOT CAUGHT IN THE POWER ROLLER

REMOVING CAB FROM CAT FRONT END LOADER USING IMPACT WRENCH TO TAKE OUT OF BOLT WRENCH TWISTED PINNED R HAND

LOADER JACKED UP ON WOODEN BLOCKS AND STEEL STAND.BLOCKS CRACKED AND SPLIT,STEEL PLATE SLICED FINGERS AND THUMB OF RIGHT HAND.