Buscar en el registro

EE was walking from upper office to lower mill when EE slipped on the ice and fell.

EE was standing by some pallets, moving a tarp when another ee was bringing pallets over. ee did not move and the other ee had pallets in front of self. EE did not see ee and ee did not move out of the way. Other EE hit ee ankle with tire.

Employee was working near the Raymond Mill by the feed conveyor/silo and was trying to break up frozen material.

Employee was bucketing product out of bulk bag and transferring into a 55 lb bag and said when he twisted he felt a pain in his side/groin area.

IE was up at the Raymond Mill by baghouse. Two other EE's and IE were feeding product through auger, auger was running and IE stuck hand in to move product and cut hand severely. He was immediately take to emergency room.

Employee was bending down to open a small door on our derrick screening system when his lower back started hurting.

EE was working on the bagging line and bumped his hand on a metal table/ledge. He went to doctor a couple days later. He stated he was okay and then started complaining that hand was hurting again and went back to doctor. EE nor doctors have let given us any diagnosis.

Employee was up on the landing with all other employees pulling tarps over rock pile. A rock came out from under him and he fell and sprained wrist. He went to the doctor the next day.

Employee was waling by warehouse and slipped and fell due to icy conditions. He has been to the chiropractor a few times but has not returned to work.

The incident happened on Oct. 13, 12 @ 1:20 am. EE reported on 10/16/12 that he bumped his head on a pipe in the automated line while packing buckets of zeolite. He never reported to other workers that he was hurt or that he needed to see a doctor. I was not aware of medical treatment of any type until 10/24/12. He was wearing his hardhat at the time of incident.

We were thawing out some barrels that were frozen inside a warehouse with a generator and kerosene heaters. The doors were closed and the EE's were going in and out of the warehouse only to check barrels. The IE was going in and out approx. 5 hours. He told his supervisor and was sent home. He went to the doctor @8:00p.m. and was released from hospital @ 9:30 a.m.

EE was shoveling rock for approx 15-20 min then he set shovel down and walked down to supervisor and stated that his shoulder was hurting and his supervisor sent him to the hospital. According to Dr's findings ee had stated he had a shoulder that dislocated before he started work @ Bear River Zedlite

EE was shoveling when she strained her wrist.

EE was assisting on the contruction of the L-3 Raymond Mills. EE was lifting & moving ducting for the mill, in the process he strained his back.

He was cleaning with line shutdown, then he went in & started the line & went back out to clean the tail roller & not sure how he got in the tail roller. The guard was off at the time of the accident & had been off for quite a while.

EE was grommeting 2lb bags and hit the foot pedat prematurely and the die came down and took off the tip of her right thumb.

The injuried EE was helping the lift operator with the load, not watching where they were at, the ee got his fingers caught between the forks of the lift and the spout of an auger causing lacerations on 3 fingers. EE recieved 30 stiches.

Walking to check generator at 2130. Stepped on rock wrong, fell to ground. Looked at ankle, was bent inward. Stood up and popped back into place.

Employee put his hand in his glove and was bitten by a brown recluse spider.

EE WAS GOING TO TURN ON THE PUMP TO THE DIESEL TANK. IT WAS A SNOWY MORNING. EE SLIPPED AND FELL ON THE PLASTIC LINING WHICH WAS SLICK DUE TO SNOW, CAUSING A BACK AND SHOULDER INJURY.

EE WALKING THROUGH YARD SLIPPED AND FELL ON ICE RESULTING IN LOST WORK DAYS DUE TO BACK STRAIN. EE IS STILL OFF WORK

HE PULLED GROIN MUSCLE LIFTING TIMBER.

TIGHTENING LINER BOLTS WHEN WRENCH SLIPPED CAUSING EMPLOYEE TO FALL TO FLOOR.

WAS BARRING DOWN ORE IN FINE ORE BIN AND FELL IN.

HANGING CLOTHES UP FELL IN PIPE HOLE.

BALL MILL LINER FELL ON RIGHT WRIST WHILE CHANGING LINERS.

EE WAS WORKING ON FILTER PLATFORM BACKED OFF STAIRWAY STRIKING HEAD BACK ON CONCENT FLOOR. EE WENT TO CHIROPRACTOR TOE TREATMENT.

THE EMPLOYEE STEPPED OFF THE BACKHOE AND STEPPED ON A BOARD WITH NAILS STICKING THROUGH.

THE EE WAS WALKING INTO THE MILL BLDG AND SLIPPED. AS THE EE SLIPPED SHE WENT TO BRACE HERSELF ANDHURT HER SHOULDER.

EMPLOYEE WAS MOVING A PIPE.

THE EMPLOYEE WAS MOVING A PANEL AND TURNED AND TWISTED HIS KNEE.

THE EMPLOYEE WAS BOLTING TOGETHER A CONVEYOR HOUSING WHEN HIS FOOT SLIPPED AND HIS ARM GOT CAUGTH BETWEEN 2 METAL BEAMS.

THE EMPLOYEE WAS HAMMERING AN OBJECT AND MISSED THE OBJECT STRIKING HIS THUMB.

THE EMPLOYEE WAS TRYING TO MOVE A ROCK OUT OF THE CONE CRUSHER AND CAUGHT HER THUMB BETWEEN THE WALL OF THE CRUSHER AND A ROCK.

WHILE WALKING UNDER THE FEEDER BELT TO THE BALL MILL, THE EMPLOYEE HIT HIS HEAD ON THE STAND FOR THE FEEDER BELT. THE EMPLOYEE WAS WEARING A HARD HAT.

EMPLOYEES HAND WAS HIT BY A ROCK,WHILE TRYING TO REMOVE A STICK FROM THE SHAKER SCREEN.

THE EMPLOYEE WAS MOVING A CON BARRELL WITH A BARRELL CART.THE BARELL ROLLED OFF THE CART,JERKING THE EMPLOYEE SIDEWAYS RESULTING IN PULLED BACK MUSCLES.

EMPLOYEE WAS RU3NING THE PRESCRUSHER WHEN IT PLUGGED HE WENT TO CHECK ON IT WHEN HE SLIPPED & DISLOCATED HIS SHOULDER

EMPLOYEE WAS CL9ARING A PLUG IN THE CONE CRUSHER WITH A BAR, WHEN THE BAR SLIPPED AND SMASHED HIS HAND.

EMPLOYEE WAS PR2ING ON A ROCK TO REMOVE IT FROM THE ORE BIN WHEN THE BAR SLIPPED AND SMASHED HIS THUMB.

INSTALLING BALL3MILL LINERS IN BALL MILL, PULLED MUSCLES IN LOWER BACK.

HE FELL FROM TO1 SCREEN IN CRUSHER WHILE HE WAS CLIMBING DOWN FROM SCREEN

DRIVING PIN IN 1LACE WHEN A PIECE OF METAL FLEW AND HIT HIM IN THE EYE.

HE WAS DRIVING 5 TRUCK DOWN A LONG GRADE TRUCK JUMPED OUT OF GEAR BRAKES WOULD NOT HOLD HE TURNED THE TRUCK TOWARD HILL THE WHEEL CAUGHT AND ROLLED THE TRUCK STEERING WHEEL CAUGHT HIS HAND BR EAKING TWO BONE8 IN HIS LEFT HAND

EMPLOYEE WAS PR9PARING TO HOIST TIMBER WHEN SMALL ROCK FELL DOWN THE RAISE HITTING HIM ON THE LEFT FOREFINGER

HE WAS MUCKING 9OCK WHEN THE MUCKER CAME AROUND AND HIT HIS WRIST

BARRING DOWN AT3FACE OF RAISE WHEN ROCK FELL HITTING LEG CAUSING CUT.

HE WAS PULLING 2N A PUMP CABLE TO MOVE PUMP.

HE WAS DRILLING3THE FACE OF THE RAISE WHEN A SLAB OF MUD FELL

EMPLOYEE WAS WORKING IN BOTTOM OF SHAFT,HE WAS IN SKIP BUCKET WHEN IT TURNED OVER PINNED HIM AGAINST THE WALL,SMASHING HIS THUMB IN BETWEEN BUCKET AND WALL.