Buscar en el registro

Employee was cranking a cable winch to pull the dust stacker conveyor sideways. The cable guide bar on the winch failed. The broken bar flew up striking the employee on the right side of EE's face causing a laceration, fracture and right eye injury.

Employee was cleaning up spillage, pushing a wheelbarrow. The wheelbarrow started to tip over. Employee tried to prevent the tip over by grabbing one handle with both hands. The handle went between EE's fingers causing a fracture of the middle finger on EE's right hand.

Employee was operating a Porta Power hydraulic jack. The employee's right hand little finger got caught in the pinch point at the base of the jack handle.

Employee slipped on lower step while dismounting end dump, fell and injured left hip and knee.

Employee was operating a 7" portable hand grinder. The grinder kicked to the left causing a laceration on the employees left forearm.

Employee was flipping gate on 2 belt to 3 belt transfer point. Gate pinched middle finger on left hand causing minor contusion. Finger later became infected.

Employee was cleaning up material spillage from under feed hopper. He glove got caught on conveyor belt roller. His left hand/forearm was pulled into and caught between conveyor belt and roller causing fracture and contusion to left forearm.

EE was using pressure water hose to wash out the sand screws. When the water pump was turned on the hose jerked causing the EE to fall. EE struck his left arm on the plant causing a laceration just above the elbow.

Employee was changing screens in the stone sizing plant. Employee was pulling on the screen to remove it from the screen deck and he pulled a tendon in his right arm.

Employee was lifting an electric motor from it's mount using a block and tackle. The motor was caught on the base. The employee twisted the motor to free it and the motor sprang up striking the employee's left arm.

EMPLOYEE HAS SILICOSIS AS SHOWN ON CHEST X-RAY. EE IS ASYMPTOMATIC AND HAS NORMAL PHYSICAL EXAM.

EMPLOYEE FELL TO HIS KNEES WHEN A CATWALK PLANK BROKE.

EE was walking and carrying a 20 lb propane bottle when he slipped on snow and ice. EE fell and broke right ankle.

EMPLOYEE WAS WALKING FROM LOCKER ROOM TO WELDING SHOP. EMPLOYEE SLIPPED AND FELL. BROKEN LEFT SHOULDER.

EE WAS MOVING SPARE RETURN ROLLER FOR CONVEYOR. A SECOND ROLLER FELL AND STRUCK EMPLOYEE ON RIGHT HAND.

EMPLOYEE WAS USING A HAND GRINDER TO CLEAN UP STEEL FOR WELDING. A PIECE OF METAL WENT INTO RIGHT EYE.

EE WAS PERFORMING WELDING MAINTENANCE IN THE WELDING SHOP ON A TRK BODY EE WAS MOVING AROUND INSIDE THE TRK BODY WHEN HE SLIPPED & CAUGHT HISFINGER ON THE EDGE OFA PIECE OF STEEL THAT WAS B EING WELDED TO REPAIR THE TRK B0DY

EE WAS WORKING ON P & H RT CRANE. HE STEPPED ON THE RAISED OUTRIGGER. THE OUTRIGGER FELL 1 FOOT. EE DISLOCATED SHOULDER.

EMPLOYEE HAD A ROCK STUCK IN THE TAIL GATE OF A DUMP TRUCK. EMPLOYEE TRIED TO FREE THE ROCK BY PULLING OU TON THE TAILGATE AND GOT HIS HAND CAUGHT BETWEEN THE TAILGATE AND THE TRUCK BODY. INJU RY LATER BECAME INFECTED.

EE WAS WELDING. A PIECE OF SLAG FELL INTO HIS SHIRT SLEEVE. BURN WAS TREATED WITH FIRST AID BUT LATER BECAME INFECTED REQUIRING MEDICAL TREATMENT.

EE LIFTED A BEARING WITH A RATCHET HOIST TO SLIDE THE BEARING ONTO THE SHAFT. WHILE TWISTING THE BEARNING TO ALIGN IT ON THE SHAFT, EE INJURED HIS BACK.

EMPLOYEE WAS DRIVING A BEARING OFF A SHAFT USING A STEEL HAMMER. A PIECE OF STEEL BROKE OFF THE BEARING AND PENETRATED THE EMPLOYEES ARM JUST ABOVE THE CUFF OF HIS GLOVE.

WHILE LIFTING A PIECE OF STEEL IN THE WELDING AREA, EMPLOYEE PULLED A MUSCLE IN HIS BACK.

EMPLOYEE WAS LIFTING A PIECE OF STEEL PLATE TO BE WELDED TO A SHOVEL BUCKET. EMPLOYEE PULLED A MUSCLE IN HIS BACK.

EMPLOYEE WAS DRIVING A BEARING INTO PLACE WITH A STEEL HAMMER. A CHIP BROKE OFF THE HAMMER AND FLEW INTO HIS HAND. THE CHIP HAD TO BE SURGICALLY REMOVED 9/28/94.

EMPLOYEE CLAIMS TO HAVE EXPERIENCED BACK PAIN WHILE BENDING OVER TO INSTALL A PART ON THE ROCKTRUCK.

WHILE STANDING O THE CONVEYOR CATWALK EMPLOYEE WAS HIT IN THE LEFT ANKLE BY A PIECE OF FLY ROCK FROM A BLAST AT THE QUARRY

EMPLOYEE WAS USING BENCH GRINDER WITH WIRE BRUSH A PIECE OF MATERIAL FLEW INTO HIS EYE EMPLOYEE WAS WEARING EYE PROTECTION

WHILE USING THE OXY/ACETYLENE TROCH EMPLOYEE GOT SLAG INTO HIS BOOT CAUSING A BURN ON HIS LEFT FOOT

STEEL SLIPPED AND JAMMED FINGER AS I WAS MOVING STEEL PLATE FOR STORAGE.

REOCCURRING BACK PROBLEM POSSIBLY DUE TO TYPE OF EQUIPMENT HE WAS RUNNING.

STRAINED BACK WHILE LIFTING PULLING AND BENDING INSTALLING SCREEN CLOTH.

WHILE BEING REMOVED FOR REPAIR, THE CONVEYOR IDLER DROPPED ON FINGER AND CUT IT OPEN.

HIT HEAD ON DOOR OF FRONT END LOADER.

EMPLOYEE SLIPPED WHEN CLIMBING LADDER TO GET INTO END DUMP.HE THEN FELL BACKWARDS TO GROUND HITTING SHOULDER ON STEEL PLANT PART ON GROUND.NO LOST DAYS UNTIL MARCH 9,1992 FOR OPERATION.BEFORE THAT HE WAS WORKING AND GOING TO DOCTOR.

PULL IN LOWER ABDOMEN WHILE MOVING DRUMS OF OIL.CAME BACK TO WORK BUT WAS OPERATED ON AND OUT OF WORK FROM 02-25-91 TO 03-08-91.

FORD WAS ICED UP IN PLACES SLIPPED ON ICE GOING INT O OFFICE FELL & SHURT LEFT KNEE & RT HAND

STRAINED HIMSELF LIFTING 50 LB.

WHILE MOUNTING A TIRE, BEAD BLEW & TIRE FLEW INTO AIR-BROKE WRIST & FRACTURED FINGERS.

EMPLOYEE CUT FINGERS ACROSS EDGE OF STEEL CATWALK.

REPAIRING FLIGHTS INSIDE DRYER LIFTED ONE TO MOVE IT & HURT BACK.

ATTACHED ENGINE TO LARGE A FRAME TO INSTALL IN ROLLER #61 PUSHING ON RT SIDE OF A FRAME TO POSITION A FRAME & ENGINE OVER ROLLER FOR INSTALLATION FELT TENDON SNAP IN BACK OF LOWER RIGHT LEG

DISASSEBLING A DIESEL ENGINE WHEN SOMETHING SNAPPED IN RIGHT ELBOW.

DURING OPERATION OF EQUIPMENT, THE HYDRAULIC HOSE TO THE RIGHT OF THE OPERATOR BURST AND BLEW OUT THE WINDOW, SHATTERING THE GLASS INTO NUMEROUS PIECES.

WAS WORKING ON WASH SCREW WHEN SLIPPED & FELL OFF PLANT.

WAS WORKING ON WASH SCREW WHEN SLIPPED & FELL OFF PLANT.

CLIMBED UP ON FENDER OF TRUCK TO FILL OIL RESERVING CLIMBED DOWN TO PUT OIL CONTAINER DOWN CLIMBED BACK UP TO CLOSE HOOD AND SLIPPED AND FELL BACKWARDS.

I NAME WAS GREASING SAND CONVEYOR WHEN HE GOT STUNG TWICE BY HORNETS ONCE ON THE ARM AND ONCE ON THE CHIN

WHILE PULLING ONTAG LINE ROPE BROKE, EMPLOYEE LOST FOOTING AND FELL TO GROUND OVER A 30" RETAINING WALL, INJURING ANKLE.

CUTTING BELTS,SLIPPED,CUT LEG.