Buscar en el registro

As EE was climbing down the water pull EE missed the step and fell to the ground. When EE hit the ground there was a loud pop and EE's right hip started to hurt.

Was checking air filter on Volvo 350 loader while standing on tire and lost balance and fell. Twisted while falling to avoid hitting head and landed on arm.

Climbed up shaker box to measure rollers while climbing back down he twisted or turned in position that injured back.

Employee was taking some straps off a bobcat bucket that had been used to hold it in place. The bobcat bucket was slightly elevated and when the straps released the bucket fell on his foot.

Employee was moving stacks of 50# bags of ANFO from a trailer into a truck for delivery. The stacks were 8 bags high and are palatized to be moved with a hand cart. He was putting the last stack into place but it was a tight fit, he tried to move the bags sideway and ended up smashing his pinky finger between the wall of the truck and the rail of the cart.

While cleaning debris from the grizzly feeder he lost his balance and slid down a chute about 39" onto a pile of rock. One of the rocks rolled down and bruised his right leg. This machine was shut down and locked out at the time the task was being performed.

Stepped down from time shed and twisted foot.

While climbing out of skidsteer foot got caught and he fell. Broken left ankle.

Hauling 30 tons of sedora red, he hit a rock off to the side of the road and lost control of the haul truck

Checking oil leak on loader, he stepped on loader step to get a better look. Oil had gotten on step; he slipped and fell.

Lifting shieve into place on PTO, it shifted, pinching his thumbs between shieve and guard.

EE WAS CLEANING UP AREA NET TO STORAGE SHED WHEN EE SLIPPED ON ROCK WITH MUDDY BOOT

WHILE THE EE WAS HITTING A STEEL BLOW BAR WITH A SLEDGE HAMMER, A PIECE OF THE BLOW BAR FLAKED OFF AND HIT EE IN THE NECK, CUTTING HIM.

Stablilizer screening plant feed screw was stuck and not turning. He reached in to pull out obstruction and screw started turning pinching his thumb between screw and cylinder. He assumed that the breaker had tripped due to the obstruction, causing the operating system to be energized and that is why he didn't lock out system.

EMPLOYEE PICKED UP A BOARD WITH A NAIL IN IT & THE NAIL POKED THROUGH HIS FINGER.

Fire extingisher mount came loose, knocking out safety pin allowing extingisher to release contents. Operator couldn't get out of loader fast enough and inhaled some of the contents.

While repairing belt, belt slipped caught hand on sharp object cutting hand.

WHILE EMPLOYEE WAS CUTTING A PIECE OF METAL WITH TORCH HE GRABBED HOT METAL WITH BARE HAND.

Wind blew a piece of debris in eye.

WHILE CUTTING RUBBER ON 1/2"CHUTE, HOLDING RUBBER WITH LEFT HAND IT SLIPPED FORWARD AND THUS CONTACTED SHARP METAL ON CHUTE. HE WAS WEARING GLOVES.

EE WAS STEPPING OUT OF SKID LOADER NOT USING HANDRAILS, SLIPPED LANDING ON FOOT & ROLLING ANKLE.

SMASHED FINGER BETWEEN BLOWBAR HOUSING AND THE CRUSHER HOUSING.

AFTER FILLING THE WATER TRUCK HE WENT TO SHUT OFF VALVE AND HANDLE FELL OFF AND CUT HIM.

EE WAS USING A BOARD AS AN ADJUSTMENT TOOL FOR A DRIVE BELT. WHEN BOARD BROKE CAUSED A SUDDEN FORWARD HAND MOVEMENT & THUMB WAS BENT BACK.

DIGGING OUT CRUSHER WITH HANDS A ROCK SLIPPED OUT OF GRASP AND LANDED ON LEFT FOOT.

EMPLOYEE WAS DISLODGING ROCKS FROM A ROCK BOX THAT CARRYS 3" TO 8" SIZE ROCKS, A LARGE ROCK FELL FROM APPROX. 2' STRIKING THE RIGHT HAND.

COMING DOWN A MUCK PILE SLIPPED AND FELL PUT ARM OUT TO STOP FALL.

WHILE CUTTING FLEXCO TAPE WITH RAZOR, CUT RIGHT THUMB.

REMOVING STEEL (DRILL) FROM HOLE MANUALLY, STEEL STARTED TO SLIP BACK INTO HOLE, SO HE GRABBED IT AND TWISTED BACK.

REMOVING STEEL (DRILL FROM HOLE MANUALLY, STEEL STARTED TO SLIP BACK INTO HOLE SO HE GRABBED IT AND TWISTED BACK.

REPAIRING CHAIN ON BELT DRIVE, FELL OFF BELT APPROX 10 FT.

REACHING FOR BOLT IN SCREEN SHOULDER DISLOCATED

WHILE CUTTING A BEARING FROM A CONVEYOR ROLLER WITH OXYGEN/ACETYLENE TORCHES THE DUST/GAS INSIDE THE ROLLER IGNITED, SHOOTING A FLAME INTO THE EMPLOYEE'S FACE.

WHILE ROLLING BOULDER OFF BELT STRAINED BACK

ANOTHER EE DROPPED A PRYBAR ON TOP OF HIS HEAD. WAS WEARING A HARD HAT.

LOST CONTROL OF 910 CAT LOADER WHILE HAULING WELDER UP A STEEP GRADE. JUMPED FROM VEHICLE AND WAS RUN OVER BY IT.

DRILL STEEL FELL FROM STEEL RACK AND STRUCK EMPLOYEE ON SHOULDER.

SLIPPED OO TONGUE OF DRILL COMPRESSOR. MAY HAVE HAD GREASE ON SHOE.