Buscar en el registro

Miner (wearing seat belt) was leveling the ground using the cutting edge of the loader bucket, when the bucket penetrated the ground, causing a sudden stop of the machine. The operator then struck his chest on the steering wheel. The machine manufacturer provides lap-type seat belts (no shoulder straps).

Employee was over around crushing plant greasing when stepped on rock twisting left knee.

Installing discharge chute on conveyor screen when it slipped pinching the right thumb while aligning the bolt holes.

Operator was helping change wear plate on loader bucket weighing less than 50 lbs

While doing maintenance on conveyor #2123, slipped in mud causing contact with pipe support for conveyor.

When holding metal up to be welded in place is when the arc flash occurred.

Setting screens in place when one screen slipped, catching EE's left middle finger between the two screens, EE was wearig gloves.

EE was shoveling wet & heavy materials from around conveyors when he dislocated disc in his lower back. EE did not receive medical help until 10/13/10.

Pulling on a ratchet tightening screen bolts. Note: Injury was not reported until employee went to Dr. on 3/17/09.

Pouring oil in the used oil tank, twisted lower left arm. (April 16, 2009 went to dr for check up on left elbow no follow up necessary and no restriction). by 320091130025

Employee was using a utility knife to cut open a stick of blaster dynamite while loading a rock blast not realizing the position of his fingers.

Stepped on a small rock, rock moved, lost balance and fell against a large rock. Struck his left shoulder, causing a dislocation of his left shoulder.

Greasing crushing equipment, he stepped on a rock and twisted left knee, tearing ligaments in the knee.

CLEANING OF OIL SOTRAGE BUILDING

WHILE TRYING TO DISLODGE LARGE ROCK FROM JAW CRUSHER, HIS RIGHT FOOT THE TOE AREA WAS AT THE EDGE OF ENTRANCE & ANOTHER ROCK ROLLED DOWN FRACTURING THE END OF THE BIG TOE & THE ONE NEXT TO IT ON RIGHT FOOT.

EMPLOYEE WENT TO LIFT TONGUE ON COMPRESSOR TO HOOK UP.

WHILE WELDING AND GRINDING ON R9OCK CRUSHER A PIECE OF METAL SUBSTANCE ENTERED LEFT EYE CAUSING THE INJURY. SAFETY EYE PROTECTION WAS BEING WORN AT THE TIME OF THE INJURY.

WHILE DREDGING THE EE STEPPED OUT OF CABIN & WITH WIND BLOWING QUITE HARD WAS HIT IN THE FACE WITH SAND.

CLEANING ROCKCRUSHER HOPPER OUT, AND WHILE DOINGSO A ROCK CAME SLIDING DOWN STRIKING OPERATORS LEFT FOOT, CAUSING A HAIRLINE FRACTURE.

WHILE PULLING ON CABLE TO ATTACH TO BREAKING BALL, PULLED TOO HARD, TORE MUSCLE AT TOP OF PELVIS.

SLIPPED IN ROWBOAT WHILE DISASSEMBLING PIPELINE.

WHEN INSTALLING PIPE ON GRAVEL PLANT AND WORKING OFF LADDER TIGHTENING UP CLAMP ON PIPE WHEN LADDER SLIPPED LETTING EMPLOYEE FALL AND STRIKING RIGHT ANKLE ON ANGLE IRON FRAME.

STEPPING FROM THE LOADER PLATFORM ONTO THE TRUCKTIRE. HE DID NOT USE LADDER PROVIDED. HE LOST HIS BALANCE & FELL ON HIS BACK SIDE.

WHEN CLEANING GROUND CONVEYOR, SHOVELING SAND, THE WET SAND FAILED TO CLEAN OFF SHOVEL RESULTING IN PULLING AND STRAINING MUSCLE IN LEFT UPPER ARM.

INVESTIGATING LEAK ON VIBRATING WHEN RIGHT HAND CAME IN CONTACT WITH FLYWHEEL ON SHAFT. BROKE 3RD AND 4TH FINGERS ON RIGHT HAND.

EMPLOYEE WAS WORKING ON PLUGGED SAN DLINE OF PLASTIC PIPE. IN TURNED CAUSE DPULLED MUSCLES IN REIGHT SIDE OF NECK.

EMPLOYEE BENT DOWN TO PICK UP 2 FT OF 8" PIPE WEIGHING APPROXIMATELY 35-40 LBS.

EMPLOYEE WAS USING A BAR TO PRY UP ROCK CHUTE ON ROTARY SCREEN WHEN BAR SLIPPED LETTING HIM COME DOWN AGAINST THE EXPANDED METAL WALKWAY.

95719ING SCREEN FRAGMENT OF GRAVEL ENTERED L ARM

OPERAT OR WAS WELDING DISCHARGE CHUTE OFF OF WASHER WHEN HE PICKED UP FLASHES FROM WELDING ARC DURING THE PROCEDURE

STACKING BARRELS AND MOVING CABLE BLOCKS.

SLIDING PIPE UNDER A POLE AND FINGERTIP ON RIGHT HAND WAS CAUGHT BETWEEN PIPE AND POLE.

CLIMBING INTO LOADER FOOT SLIPPED OFF BOTTOM STEP CAUSING OPERATOR TO COME IN CONTACT WITH STEP OF LOADER CAUSING INJURY TO RIBS ON LEFT SIDE OF BODY.

LOOSENING IMPELLER SHAFT. REPAIRING PUMP.

STOPPED WELDING AND RAISED WELDING HELMET WHEN HOT WELDING SLAG POPPED UP INTO RIGHT EYE.

WASHER OVERFLOW TROUGH PLUGGED WITH CLAY AND WAS CLEANING OUT WITH SPADE, WHEN SLIPPED OFF BACKWARDS LANDING ON HIS FEET.

GOING THROUGH HAND RAIL TO REVERSE CABLE WINCH DIRECTION AND HIT RIGHT KNEE ON RAILING.

WATER HOSE TO ENGINE DISCONNECTED AND BLOWING WATER OVER BARGE DECK HAVING SPILLED OIL ON PLANKS, MADE SLIPPERY ADN WHEN OPERATOR WENT OUT OF OPERATOR'S CABIN, HE SLIPPED AND FELL BACKWARDS ST RIKING HIS BACK ON DECK FLOOR.

SEVERE CHEST PAINS,SHORTNESS OF BREATH LEFT ARM PAINFUL.

HOLD IRON TO BE WELDED AND CAUGHT WELDING ARC FLASHED TO THE EYES.

STOOD ON CHAIR STEP TO OBSETRVE WINCHES AND STEP GAVE AWAY, BRUISED LOWER RIBS X RAYED AND NOTHING.

PUSHING FINE SAND AND WAS STUNG BY A BEE.

MOVING HEAVY EQUIP LIFTING HOIST WHEN FELT PAIN IN LOWER BACK.