Buscar en el registro

Employee was standing and stepped to the side and twisted his knee

sprain of hip and thigh due to normal activity, repetitive application of break on loader.

Uneven ground at base of ladder, employee stepped into a pothole.

Employee was operating plant. A rock became lodged in a conveyor belt. Employee used a pry bar and hammer to dislodge rock. Hammer struck pry bar, pry bar struck employee's finger.

EMPLOYEE WAS SHOVELING SPILLAGE FROM AROUND PLANT AREA, SOME TIME LATER HE COMPLAINED OF IRRITATION IN HIS ELBOW.

EE WAS WORKING ON 39L DOZER, REMOVING TRACK FROM DOZER, HE RESTED HIS LEFT HAND ON TRACK WHEN UNBOLTING, TRACK SEPARATED AND PINCHED RING FINGER BETWEEN PADS ON TRACK. HE LOST HIS NAIL AND SKI N OFF TIP AND SIDE OF FINGER.

EE WAS ASSISTING THE REMOVAL OF A BRAKE DRUM AND HUB WHEN IT CAME FREE FROM THE BRAKE SHOES. IT ROLLED IN THE PATH OF THE EE AND FELL ON HIS LEG.

THE CRUSHER WAS PLUGGED WITH A LARGE ROCK. EE WAS ASSISTING IN UNPLUGGING IT. AFTER THE CRUSHER WAS CLEAR, THE EE WAS LEAVING THAT AREA. HE PUT HIS HAND IN AN UNSAFE AREA OF THE CRUSHER AND A ROCK STRUCK HIS HAND.

A 2" X 12" X 5' PIECE OF LUMBER WAS MOUNTED ON ACONVEYOR. IT CAME LOOSE AND WAS BOUNCING AROUND.WHEN EMP GRABBED IT A ROCK GOT WEDGED BETWEEN THE BOARD AND THE BELT AND SMASHED HIS FINGER.

EE WAS TRYING TO LOOSEN A BOLT WITH A WRENCH AND SPRAINED HIS WRIST.

A METAL PLATE WAS BEING LOWERED INTO PLACE WITHA COM-A-LONG WHEN HTE LIFTING POINT WEAKENED AND THE METAL PLATE PULLED THROUGH. WHEN THE PLATE OF METAL FELL THEEMPLOYEE SLIPPED AND A PIECE OF STEEL FELL ON HIS LEG.

EMPLOYEE WAS CLIMBING DOWN FROM A 641 SCRAPER, TRIPPED ON A ROCK & INJURED THE LIGAMENTS AROUND HIS LEFT KNEE. EMPLOYEE DID NOT NOTIFY EMPLOYEE OF INCIDENT UNTIL 4-8-94.

EMPLOYEE WAS SPLICING A WIRE, KNIFE SLIPPED AND HE CUT HIS THUMB.

CONDITIONS OF THE JAW CRUSHER ARE SUCH THAT NO MECHANICAL DEVICES AREA POSSIBLE. HAS TO BE LABOR INTENSIVE. EMPLOYEE WAS LIFTING AND TURNING AT THE SAME TIME.

EMPLOYEE WAS USING A BAR TO PUSH A PIECE OF EQUIPMENT, BAR SLIPPED, AND EMPLOYEE SLIPPED ON SAFETY CHAIN.

EMPLOYEE WAS LIFTING A PIECE OF IRON. HE STRAINED A MUSCLE IN HIS LOWER BACK.

EMPLOYEE JUMPED OFF DOZER TO INPECT HYDRAULIC OIL LEAK IGNITION.PULLED MUSCLE IN BACK.

EMPLOYEE WAS LIFTING SMALL METAL SCREEN TO INSTALL IT ON ROCK PLANT AND FELT A PULL IN HIS LOWER BACK.

EMPL WAS MOVING METAL SCREEN SOUT OF TRUCK & STRIANED BACK.

EMPLOYEE WAS USING CUTTING TORCH ON BEARING FOR SCREEN. GREASE ON BEARING IGNITED AND CAME INTO EMPLOYEE'S FACE.

FOREIGN OBJECT IN EYES.

EMPLOYEE WAS WORKING ON ENGINE, METAL BAR CAME UP AND HIT HIM ON FOREHEAD.

EMP. HAD PLACED HAND IN DOOR JAM OF LOADER WITH DOOR OPENED. WHEN HE STARTED TO MOVE LOADER, DOOR SWUNG BACK AND CLOSED ON HIS LEFT THUMB.

EMPLOYEE WAS LI0TING A SCREEN UP & LIFT ED WRONG WRENCHING HIS BACK

TIGHTENING BOLT ON SKIRTING UNDER HOPPER EMPL EITHER FELL OR TRIED TO JUMP TO PILE OF DIRT 6-7\ BELOW LANDING WITH BACK AGAINST 1/2\\ CHAIN.

GREASING EQUIPMENT IN AWKWARD POSITIONS BEGAN EXPERIENCING LOWER BACK PAIN WORKMANS COMPENSATION JUST ACCEPTED CLAIM

MR MCNAMARAS SHOVEL SLIPPED TRIED TO RECOVER SHOVEL FOREARM WAS PINCHED BETWEEN WALL AND MACHINE

HOISTING ELECTRIC MOTOR HILLIS WAS HOLDING CHAIN WHEN MOTOR SLIPPED

WHILE GRINDING DOWN A RUBBER GROMMENT ON GRINDER, GROMMET SLIPPED AND FINGER CAME IN CONTACT WITH GRINDING WHEEL.

WORKING ON UNDER CARRAIGE OF DOZZER. WHEN HE WENT TO GET OFF MACHINE, FOOT SLIPPED ON SIDE RAIL AND HE LANDED AWKWARDLY.