Buscar en el registro

EE was inspecting the portable crushing/screen. EE's hand was resting on the I-Beam when a rock struck EE's finger tip resulting in a laceration. The rock fell from the screen above approximately three feet striking EE's finger tip.

At approximately 11:30 am ee received an electrical shock. EE was standing on the second step up from the ground of a 6' aluminum ladder which was leaning against a conveyor belts metal tail pulley guarding. He was adjusting a nearby water valve with his right hand as he was holding the guarding with his left hand.

EE WAS ADJUSTING THE ELEVATOR CHAIN ON A WHEEL SCRAPER WITH ASSIST FROM A CRANE. THE LIFT CHAINBROKE, AND HIT EE ON THE HEAD, CREATING A CUT TOTHE TOP BACK RIGHT SIDE OF THE HEAD. IT REQUIRED 10 STITCHES & NEEDED TO BE KEPT CLEAN

WHILE INSTALLING HEAD PULLEY IN FRAME, PULLEY SWUNG AND BRUISED SHIN.

EMPLOYEE WAS CLEANING AN ASPHALT SHUTE AT THE HOT PLANT. METAL SCRAPING BAR GOT CAUGHT ON A SLATCAUSING IT TO SLAP EMP UP BESIDE THE HEAD BREAKING RT JAW BONE. A GUARD HAD BEEN REMOVED TO PERF ORM THIS JOB. IT HAS BEEN REPLACED.

A WASP LANDED IN THE EMPLOYEE'S HAIR, CAUSING HIM TO SWING AT THE WASP.WHILE HIS ARM WAS STILL SWINGING IT CAME INTO CONTACT WITH THE SHARP BOTTOM EDGE OF THE TESTING SCREENS, CAUSING THE INJU RY THAT REQUIRED THREE STITCHES.

EMPLOYEE WAS HELPING TO REPAIR A CRUSHER AT THE CRUSHING PLANT. A BRASS BUSHING SLIPPED AND CAUGHT HIS RIGHT INDEX FINGER. EMPLOYEE REQUIRED APPROX. 8 STITCHES ON HIS FINGER.

TIGHTENING A PLUG WITH PIPE WRENCH, WRENCH SLIPPED AND CUT KNUCKLE ON RIGHT INDEX FINGER.

RAM HAMMER, SUSPENDED BY CABLE, SWUNG AND HIT ELBOW.

WHEN CLIMBING INTO DRIVER'S SEAT ON MOTOR GRADER, EMPLOYEE WAS ONLY HOLDING ON WITH ONE HAND-LOST HIS FOOTING AND CAUGHT FINGER IN FRONT WINDOW FOLDING BRACKET.

WORKING ON PIECE OF EQUIPMENT IN SHOP. EMPLOYEE SLIPPED OFF STEP & HIT HAND.

PLACING SUPPORT DOLLY UNDER STREET BROOM SUBFRAME THUMB WAS PLACED ON TOP OF SUPPORT DOLLY WHEN SUBFRAME SLIPPED & FELL ON THUMB

EMPLOYEE WAS WORKING ON A PIECE OF EQUIPMENT WHEN HIS WRENCH SLIPPED, CAUSING HIS CHIN TO HIT A PIPE. EMPLOYEE CUT INSIDE OF LOWER LIP.

OBSERVING BLEEDING PRECAUTIONS FOR HIGH PRESSURE SYSTEM, REMOVED FITTING OIL SHOT IN FACE HE INHALED FLUID IN LUNGS

EMPLOYEE WAS DOING REPAIR WORK AT THE CRUSHER. HE HIT HIS HAND WITH A SLAG HAMMER.

EMPL WAS OPERATING CAT DOZER HE STATED THAT SHIFTING GEARS HAD CAUSED LEFT ARM & SHOULDER TO HURT. EMPL STATES HE DID THIS ON OR ABOUT 4/19/91 HOWEVER HE CONTINUED TO WORK. HE WENT TO DR ON SU NDAY 4/21/91. HE AGAIN RETURNED TO WORK WITHOUT INFORMING US. HIS LAST DAY WORKED WAS 5/2/91. RETURNED TO WORK ON 7/1/91 OFF AGAIN ON 7/15/91 BECAUSE EVEN AT MODIFIED WORK HE CONTINUED TO HAV

EMPLOYEE WAS INSTALLING SEAT IN LOADER. WHILE LIFTING, HE FELT A PULL BUT DIDN'T THINK IT WAS SERIOUS. IT GOT WORSE EVERY DAY SO HAD TO SEE A DOCTOR.

EMPL WAS WORKING IN SHOP REPAIRING & SUPERVISING REPAIRING WHEN HE BECAME DIZZY & PASSED OUT FOR FEW SECONDS. RUSHED HIM BY AMBULANCE TO EMERGENCY WHERE POSSIBLE HEART ATTACK WAS CONFIRMED. AF TER COMPLETE DIANOSIS WAS FINALIZED DEFINITE HEART ATTACK WAS RULED CAUSE & EMPL HAD OPEN HEART SURGERY PERFORMED.

EMPLOYEE WAS UNSCREWING A PISTON BOLT ON A TRUCK. THE BOLT BROKE, CAUSING HIS HAND TO HIT ANOTHER BOLT ON THE MOTOR. THIS RESULTED IN A CUT ON HIS LEFT MIDDLE FINGER WHICH REQUIRED THREE STITC HES.