Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
The company was notified that ee qualified for an occupational pneumoconiosis claim.
The company was notified that employee was awarded 10% permanent partial disability for an occupational pneumoconiosis claim.
The company was notified 7/9/13 that EE qualified for a occupational pneumoconiosis claim.
While moving a rock out of the feeded the rock slipped from his hand causing a cut.
While hauling water line employee's finger was mashed
On the first right panel 002 section #6 belt in the #4 entry a rock fall measuring 1'x17' fell affecting ventilation
At break 14 #1 belt a rock fall occurred measuring 6'x2' x8" which knocked a hole in the stopping.
A roof fall was discovered between the #3 & #4 entry at break 23
Illness
A roof fall 15'x15' and 0' to 6' was discovered in the intake affecting travel
Employee was finishing up the right side of his cut while loading a buggy when he felt something hit him in the leg causing a laceration to his lower left leg.
Roof fall at # 17b break in the neutral air course.
A mechanic was removing an old U-joint from a coal truck. In the process of striking the object to punch the U-joint out, the mechanic delivered a glancing blow, which caused a 6 inch long x 5/8 inch thick bolt to fly out and hit the injured party in the mouth. This caused a cut to the mouth, one tooth to be knocked out, one tooth broken & two teeth to be loosened.
A rock fall occurred above anchorage at crosscut 14 between #2 and #3 return entries along the #1 belt at spad #176 The fall knocked out a return stopping. No one was injured or trapped, no damage to equipment. The return air course was rerouted.
An area near a previous roof fall had been cribbed the rock shifted causing the cribbing to fall. No damage was done and travel and ventilation was not affected.
The area of the fall had been bolted with 4' glue bolts, a rider seam 5' to 6' high let loose allowing a section of roof to fall. Several cribs were set in the area.
An unplanned roof fall above the installed roof bolts. The fall is located at #18 cross cut along the #1 belt between #2 and #3 entrys. No one was injured, trapped and no equipment was involved. The fall was an extension of a fall that was reported 6/22/09.
Roof fall above ancorage occurred in the primary escape way at break 11 along #1 belt at spad #161. The fall was 6 to 7 feet high 19' wide and 22' long. No injuries, no equimpment involved, and ventilation was not impaired.
Employee was coming from deep mine fully loaded; he was speeding, he was in 7th gear, he missed the curve flipping over the truck.
An unplanned roof fall above the ancorage zone of the installed roof bolts. The fall is located at #18 belt (did not fall on belt) between 2 and 3 entry. The fall knocked a return stopping. No one injured or trapped, no damage to equipment.
Putting up 8 ft bolts when bolt got hung up on drill steel pinchers. The up pressure was hit in an attempt to get the plate unhung. Holding on to the plate, the bolt bent, pinching his finger against the drill steel pincher; requiring 12 stitches.
While doing preshift duties, ee stepped in a hole. Later in the shift while shoveling coal, he felt a pain in his waist running down his leg. Pain was minor but noticeable. Did not miss any work until April 8th when pain became more intense. He went to doctor who advised an MRI and time off.
A roof fall occurred at crosscut 19 between #5 and #6 entries. The fall measured 5'H x 20'L x 19'W. There were no injuries but a stopping was destroyed interupting ventilation. The area had been bolted with 4' bolts.
Injured was installing a yellow rope cable hanger. Injured jumped up & hooked the hanger hook over the roof bolt plate & when he came down he caught the last 3 fingers of his right hand in a loop of rope tearing skin off end of pinky finger & bruising the other two fingers. The man was left hanging by his fingers & coworker had to lift him up to get fingers loose.
EE & other were running water thru the spray plaster machine to flush it out & the nozzle plugged up. When the nozzle cleared itself, the hose jumped out of work hand & sprayed him in the face. The force knocked his glasses off & got material in both eyes. Transported to hospital,had eyes flushed & given antibiotic.
Injured and co-worker were attempting to clear a rock from under the foot jack of the TRS. Co-worker was prying on rock with a fiberglass slabber bar and injured was trying to move the rock with his hands. The bar broke and the injured's middle finger on his left hand was caught between the rock and the foot jack causing a fracture.
Injured had pushed supplies off the scoop with the ram. He had a chain hooked around the supplies & anchored to a hook on the ram. The chain was too tight to unhook & he was holding on to the chain with his right hand & he stepped onto the chain attempting to get slack & he caught his finger between the chain & the hook cutting his finger & causing a distal fracture.
Injured and co worker were walking thu the crosscut from #4 to #3 entry. Employee stated he was looking at the roof and he stepped into an offset in the bottom causing him to fall to the bottom spraining his right knee.
A roof fall was found at 8:45am in #7 entry one break inby spad # 3418. The fall measured 4' H x 20' L x 10' W. The area had been bolted with 4' resin bolts. There was no equipment damaged or injuries but the intake had to be re-routed around the fall.
A roof fall was found in #2 entry at crosscut #19 near spad #206. The fall measured 20'X20'X4-5'high. No injuries or equipment damaged as a result of the fall. Area had been bolted with 4' resin bolts.
A roof fall was found in #7 entry on No 1 Mains between crosscut 21 and 22. There were no injuries or equipment damage. The fall measured 40'L x 20'W x 5'H. The area had been bolted with 4' resin bolts.
Employee stated he was stuffing rags into air conditioner when his finger hit the fan.
A section of roof measuring 20' w x 10'l x 8' thick fell at the highwall over #4 intake fan entry. The rock damaged the fan housing, interrupted ventilation and blocked the primary escapeway.
Injured and co-worker were rehanging line curtain in #3 entry when injured bent down to pick up the curtain, a piece of rock measuring 3 1/2' x 5' x 2" fell from between the roof bolts striking injured in the back between the shoulder blades causing hairline fractures of 3 vertebrae. Injured was treated and released from the hospital.
EE was talking to supervisor and while bent over due to seam height EE's hard hat scrapped the mine roof causing rock dust to fall behind his safety glasses. The rock dust struck him in the eye. EE has not missed any days worked~medical treatment onlu using prescription mediciation for treatment of the material in the eyes.
A roof fall was discovered when the foreman was doing his weekly airways. The fall occurred in panel No. 6 and ran from #4 ehtry through the crosscut into #5 entry outby spad #1975. The fall measured 80'L x 20'W x 6'H. There were no injuries or equipment damage. The area had been bolted with 42" resin bolts.
A roof fall was discovered on #5 beltline in #4 entry at crosscut #28 at 10:00AM. There were no injured or equipment damage.
EE was loading hydraulic oil cans into a scoop bucket, he stepped on a crib block that was under water and mud. The EE strained a mucscle in his lower right leg.
A roof fall accurred in the #7 entry on the mains inby spad #189. There were no injuries or equipment damaged. The fall measured 19'Wx50'Lx4-6'H.
Employee was attempting to straighten a bent 8' bolt. The end of the bolt was in the hole and when he shoved on the bolt he caught the end of the ring finger between head of bolt and drill chuck causing a fracture.
A roof fall was found at 11:00 AM in the mains in #7 entry at crosscut #19. There was no equipment damage or injuries. Fall measured 25'L x 18'W x 4 1/2'H. Area had been bolted with 48" resin bolts.
Roof fall occurred in intersection of #1 entry and crosscut #21 in the return. Fall measured 20' W x 30' L x 4' H. Area had been bolted with 4' resin bolts. No injuries or equipment damaged.
Injured was riding out of mine in the middle section of the mantrip that is not covered. Injured raised his head and struck the right side of his head on the roof causing lacerations to forehad and under right eye. Received 5 stitches to forehead and 8" under right eye.
Roof fall occurred in the intersection of #6 entry and crosscut #12 in the mains. Fall measured 28' L x 22' W x 4' H. Area had been bolted with 4' resin bolts. No injuries or equip. damage.
Roof fall occurred in the interseciton of number 6 entry at spad #3410 on the 2nd nw mains and extended into the cross cut. knocking out a stopping. fall measured. 50' long x 20' w x 5-6'. area had been bolted with a 4' resin bolts. no injuries or equipment damage.
Mine examiner found roof fall at break #22 in #1 entry on the mains. While doing his preshift. Fall measured 35'l x 19'w x 5'h. Area had been bolted with 4' resin bolts. No injuries or equipment damamge.
Roof fall occurred outby in face of #5 room at break #19. The fall measured 30'L X 20'W X 4 1/2'H. The area had been bolted with 4' resin botls. No injuries or equipment damaged.
Injured was operating the left side of twin head roof bolter. After setting the TRS and raising the canopy, he was installing the drill steel in the chuck with his left hand, when a piece of rock fell and caught his hand. The rock split the end of his finger open and fractured the last digit.
Roof fall occurred in intersection of #1 entry and crosscut #13. Material fell out to the slicken side top just above the anchorage. Fall measured 38'L x 18'W x 4'H. Area had been bolted with 4' resin bolts. No injuries or equipment damage.
Roof fall occurred in #2 entry at intersection at crosscut #17. Material fell out to slicken side above the anchorage. Fall measures 30'L x 35'W x 5'H. Area was bolted with 4' resin bolts.