Buscar en el registro

Employee was reaching for pins on the roof bolter, when the bolter trammed forward running over their right foot. Employee was treated at the ER where they were taken off work for restrictions preventing them from performing their normal duties.

Employee was lifting roof bolts to put on pinner when EE felt pain in EE's left shoulder. EE finished EE's shift but was hurting the next day. EE was seen by a physician who gave EE restrictions preventing EE from performing EE's normal duties.

As employee was drilling a hole for a pin, the rock fractured and a piece fell out striking EE's right ankle. EE finished EE's shift but went to the ER afterwards where x-rays revealed a fracture. EE was taken off work due to restrictions preventing EE from performing EE's normal job.

While drilling a hole, EE stopped EE's rotation while still applying upward pressure causing the pinner steel to break and strike EE in the forehead. EE was treated at the ER where EE received six sutures and a full release with no restrictions to return to EE's regular duties.

Employee was welding on a belt structure when EE lost EE's balance and fell. EE landed on EE's left arm and felt immediate pain in EE's left shoulder. EE finished EE's shift but requested to see a physician afterward and was taken off work due to restrictions preventing EE from performing EE's normal job.

Employee was using a utility knife to cut a plastic band when the knife slipped, causing a laceration to left forearm which required three sutures. Employee was given a full release with no restrictions and returned to finish the shift.

Employee was installing a roof bolt that was slightly bent and as EE attempted to straighten it, EE bumped the rotation causing it to spin and strike EE's left wrist. EE was seen at the ER where x-rays revealed a fracture and was taken off work due to restrictions preventing EE from performing EE's normal duties.

The roof bolter operator was injured while installing a roof bolt into the drill chuck. Inadvertently hit the rotation, the operator's right glove became entangled with the spinning bolt, causing fractures to the right arm and amputation of the right thumb. The thumb was reattached. The employee started missing work on 7/8/2026.

Employee was holding a concrete block in place for a brattice while another worker struck it with a hammer. The hammer struck the tip of their right pinky finger. Employee was treated at the ER where x-rays revealed a fracture. Employee was given a full release with no restrictions to return their next shift.

Employee strained their lower back while putting drill steels back into the bolter tray. Started missing work on 06/23/2026

Employee was kneeled by a battery golf cart at a outby sub when a scoop came by, striking the cart and pinching EE's right leg between the cart and the sub. EE was taken by ambulance to the ER where surgery was required to repair fractures in EE's leg.

The operator was installing a roof bolt when a piece of the top fell hitting the left Achillies. The operator started missing work on 06/17/2026 for a bruised Achillies tendon.

Employee was attempting to step through a man door and stumbled back on EE's left leg. Started missing work on 06/17/2026 for pain in the left knee.

Employee was hanging miner cable by self when EE felt pain in left shoulder. EE finished EE's shift but went to a Dr on 6/12/26 and was taken off work as EE was unable to perform EE's normal duties.

While pulling on a hydraulic hose to feed from one side of the roof bolter to the other the EE felt a sharp pain in their right arm. Continued to work until 08/03/2026 to repair rotator cuff, and bicep tendon.

Employee was attempting to straighten a roof bolt when EE's left hand slipped off, striking the side of the boom. EE continued to work EE's normal job until 6/16/26 when EE went to the Dr over continuing pain. X-rays revealed a fracture and EE was taken off work as EE was unable to perform EE's job without restrictions.

Employee was lifting a 54" belt roller when EE felt pain in abdomen. EE was diagnosed with a hernia on 6/11/26 but continues to work without restriction. EE is scheduled to see a surgeon on 6/22/26 to see if it needs surgical repair.

Employee was installing a roof bolt when the plate slid down striking EE's left forearm causing a laceration. EE received four sutures and a full release with no restrictions to return EE's next shift.

Employee was attempting to bend a roof bolt when EE slipped causing EE to fall towards EE's pin tray. EE's arm came into contact with a pin plate causing a laceration on EE's right bicep that required seven sutures. EE received a full release with no restrictions to return EE's next shift.

As the Safety Technician was walking past the power center, EE tripped over a cable causing EE to fall awkwardly on EE's right knee. Started missing work on 5/18/2026.

Employee was cutting a plastic band off of concrete block with a utility knife when it struck EE's left thigh causing a laceration. EE was treated at the ER where EE received two sutures and a full release with no restrictions to return EE's next shift.

The roof bolter operator was drilling a hole for a roof bolt when a thin piece of shale slid down the steel (4 1/2 inches by 9 inches, paper thin to 1/4 inch thick). Before the operator could stop the rotation, the shale broke loose hitting the operator on the tip of the nose. Stitches were placed in the nose and no work was missed.

Employee was walking across the feeder and felt a pop in EE's right knee. EE was seen by an orthopedic specialist on 4/23/26 and was given a full release with no restrictions. EE continued to work until 5/1/26 when EE was seen by another physician who gave restrictions preventing EE from performing EE's normal job.

The utility person was cutting the seal out of a 1-quart bottle of engine oil with a belt knife when they accidentally cut the end of their left thumb. 3 Stitches were required no work was missed.

Employee was sitting in shuttle car as the miner was loading them when a piece of metal struck them in the left arm. Employee was treated at the ER where the object was removed and they received two sutures to close the wound. Employee was given a full release with no restrictions to return to work their next shift.

Employee was using boom pressure on the roof bolter to get steels together when they moved suddenly striking right hand. Employee was treated at the ER where x-rays revealed a fracture. Employee was taken off work with restrictions preventing them from performing their normal duties.

Employee was stepping over a trailer tongue when they lost balance injuring right knee. EE was seen at the ER where they were taken off work as they were unable to perform their job without restrictions.

Employee was injured while working on a header. EE was using a pipe wrench on a steamboat jack, when the force made the pipe wrench break loose from the jack and caused EE's arms to extend abruptly and hit EE's left arm and left shoulder on the header framing. Started missing work on 04/14/2026.

Employee was installing a pin in the rib and as they tried to line the steel up with the chuck, their right index finger got caught between the two resulting in a laceration requiring five sutures. They received a full release with no restrictions and returned the same shift.

Employee was cutting a belt off of the blower motor on a roof bolter when the knife slipped causing a laceration of their left wrist. Employee was treated at the ER where they received four sutures and was given restriction of not bending their wrist for three days which prevented them from performing their normal duties.

Employee was carrying a diesel particulate filter when EE stepped awkwardly causing a jolt to EE's right hip. EE continued working until 4/1/26 when a follow up with a physician gave EE restrictions preventing EE from performing normal duties.

While using a tractor to pull a header to bottom, the operator drove over a head that had been dragged into the roadway, resulting in a jarring motion that caused low back pain. Started missing work on 2/26/2026.

Employee was moving a shuttle car cable to the rib and as they threw it they felt a pain in right elbow. Employee was seen the following day by a physician and was taken off work as they were unable to perform their normal duties.

Employee was installing a roof bolt with a board and as they pushed it to the roof, the tip of right middle finger was caught between the board and the roof. They had surgery to repair the finger and was taken off work due to restrictions preventing them from performing their normal duties.

Employee was assisting the mechanic making a car splice when the knife slipped causing EE to cut EE's left index finger. EE was treated at the ER where EE received 3 sutures and a full release with no restrictions to return EE's next shift.

While watering the roadways they stopped the diesel tractor to check the sprays on the water cart. As they were walking to the back of the water cart, they were tripped up by a nylon band laying in the road causing them to fall and twist their right knee. They worked until a week before surgery. Started missing work on 03/30/2026.

While trying to remove the outside roof bolt that had bent entering the roof strata during the bolting process, the operator used the boom to remove the roof bolt and start over. In doing so the operator swung in pulling the pin and a piece of roof strata down with the boom, catching their left hand between the tray and the roof strata. Started missing work on 2/6/2026

Employee was loading glue onto the back of EE's bolter. When EE turned EE felt pain in EE's back. EE treated at the ER where EE was taken off work for back pain.

The employee picked up a sheet of 4x8 plywood when the wind caught it. Trying to hold on to the sheet it twisted causing the employee to tear the right bicep. Started missing work on 2/12/2026.

The Mechanic was assisting in changing the cats on a miner. While the mechanic was picking the cats up to pull slack towards the back of the miner it pinched the left pinky finger in the hinge point of the cats causing a laceration and receiving stitches. NO work was missed.

Employee had pulled a diesel golf cart into a crosscut with the back partially in the road when a mantrip struck the rear of it. EE was getting back on the golf cart at the time and the steering column struck EE in the groin area. EE received bruising and an abrasion to EE's scrotum. EE was taken off work the next day as EE was unable to perform EE's job due to restrictions.

Employee was walking while carrying a timber when EE fell. EE's left hand contacted sharp rocks on the mine floor resulting in lacerations requiring sutures. EE was given a full release to return EE's next shift with no restrictions.

Employee tripped over some car cable at the section substation. This resulted in a fall and the employee hitting their nose on the corner of the sub station. They received a broken nose from this.

Employee was walking from shuttle car to help the miner move when they twisted an ankle and fell to the ground. EE was seen at the ER where x-rays were negative for a fracture but employee was taken off work due to pain preventing them from performing normal duties.

Employee was roof bolting when partner told them they were advancing to the next row. EE acknowledged them, but as the bolter trammed forward they reached for pins placing left foot under the bolter tire. X-rays were negative for a fracture and EE was given a full release. EE was taken off work the following day as they were having pain preventing them from performing normal job.

Employee was leaving a unit on EE's golf cart. As EE was preparing to turn on the road, a mantrip turned striking the front of employee's golf cart causing EE to bump EE's left knee. EE continued to work until 2/10/2026 and had surgery on 2/11/2026 on EE's left knee and was taken off work due to not being able to perform EE's normal work duties.

The operator dozed off while driving a mantrip, causing the trip to hit the rib. The operator hit EE's left knee on the dash of the ride resulting in sutures to close a cut. No work was missed.

A passenger of a mantrip that hit the corner of a rib was dislodged from the seat and landed on the mine floor. EE was diagnosed with two stable vertebral compression fractures in the spine. Started missing work on 12/02/2025.

Employee was raising a light bar with a crank handle to illuminate a dump site on the refuge pile when they felt pain in left shoulder. Employee started missing work on 1/15/2026.

When hanging a cable in the belt line during a power move, the employee felt a pop in left shoulder causing pain in an area that had been repaired before. They continued to work. Started missing work on 3/3/2026.