Buscar en el registro

Employee was grinding surface area for welder. Grinder slipped and cut the employee's left middle finger. Employee received four stitches.

Employee was helping to remove chains from a tire on the loader. EE swung a brass hammer to remove a cut metal chain link. The link struck on the left cheek causing a laceration.

Following harvest activities in the Tank house, the employee was assigned to pull samples. While attaching a single pull to a cathode, the employee's left hand was caught while engaging the locking mechanism, resulting in an injury to the left hand.

Employee was helping to carry a 14-foot wooden frame down a ramp. Their foot slipped and they fell forward striking their face on the frame, causing them to loose their left incisor and cutting the inside of their left lower lip.

Employee was washing boots off with portable hot pressure washer. While doing so a stream of hot water entered EE's boot causing burns to top of left foot.

While using a hammer and brass plug to remove drill splits from a core innertube, the hammer struck the tube rack/frame and deflected, causing it to strike the employee's left thumb instead of the brass plug, resulting in an injury to the thumb.

Employee was using a 4-pound hammer to tap in a snubber pin on a shovel dipper. A piece of fly metal from the pin struck the employee on the right cheek and caused a laceration.

While lifting machine part felt pop in shoulder, received restricted duty 3 days later.

Employee was picking up blanks in the cell rack and removing wooden blocks when employee descended from platform stepping onto wooden block on floor causing employee to fall same level and rolling EE's right ankle.

While backing up haul truck to shovel, employee had neck pain when the truck struck the shovel dipper which caused the contents to drop in truck bed.

Employee was moving vacuum hose, and it got caught causing EE to fall. EE had pain in EE's right knee which worsened on 04/24/2026.

While traveling to the primary crusher, Haul Truck 17 veered into the berm and came to rest on its non-cab side.

While making a turn on SP11 dump in HT 62, the employee bumped their right elbow on the Haul truck steering wheel spoke and caused swelling and right contusion

The employee was placing a ladder against a chute, when dirt/debris fell onto employee's face and into EE's right eye. The employee rubbed EE's right eye causing irritation.

While attempting to make a left turn in the company LV335 flatbed truck, it was hit by a personal vehicle on the driver side door. The impact caused the employee to hit their head on the driver side window.

Employee struck driver's side door of company vehicle with personal vehicle. Front air bag deployed. Employee has reported neck pain on 2/24/26. Examined at Health clinic on 2/25/26.

While attempting to make a U-turn on the UTV, the UTV turned onto its side. This resulted in injury to the right hand.

while attempting to make a U-turn on the UTV, the UTV turned onto its side. This resulted in injury to lower back, right flank and right hip.

The employee was leaving EE's Shovel 6 assignment when EE made contact with a pothole in the haul road. The Employee states EE has strained EE's lower back pain.

Crane Operator was preparing the rig to be strapped to the truss. They placed a shackle on top of the metal beam to position themselves for rigging. The shackle off the beam and fell approximately four feet, striking the employee on the back of right index finger.

Employee was lifting a desk with other employees into the back of a pick-up truck. When the employee bent down to lift and stood up, EE felt pain in EE's back and down EE's right leg.

Employee was attempting to open the back door of a UTV, and the front seat passengers opened their door to assist. Employee was able to get their door open before front passenger exited the UTV and placed their hand on the door jam. During this time the front seat passenger closed their door and smashed employees' thumb in door.

Employee was shoveling carryback material from under a conveyor belt tail area and felt pain in lumbar spine.

While dismounting Dozer 01, the employee led with their left foot onto uneven ground. Upon contact, they experienced pain in the left distal quadriceps area.

Employee was adjusting lifting shackle and overhead crane hook during lifting operations. The employee's right index finger was pinched between lifting shackle and overhead crane hook. The employee suffered partial traumatic transphalangeal amputation of right index finger with nailbed involvement.

Claims that EE hit EE's right elbow on the rear corner of EE's truck and then felt a sharp pain in EE's right shoulder while hitting the side of EE's trailer with EE's rubber mallet. Next morning EE could not move EE's right arm without severe pain. Sent to Concentra and diagnosed with a shoulder strain and contusion to elbow and placed on modified duty.

Employee was walking down staircase when EE stepped on second to the last step, the stair broke resulting in EE's left foot going through the step and hurting EE's ankle. Employee seen and released to full work duties. Employee had follow-up and seen 10/16/2025 and went on restricted duty.

While exiting light vehicle on driver's side, employee stepped onto pointed edge rock, right ankle twisted resulting in subsequent fall to ground. Injury sustained was right ankle avulsion fracture distal fibula

Employee was taking apart a 3-inch hose and the camlock struck EE in the lower lip, causing a laceration.

Employee sustained a nondisplaced fracture of right thumb (Distal Phalanx) when employee was ascending the stairs to access the belt 2260CON001 and the safety bar came down and smashed the employees right thumb.

The employee was leaving Shovel 4 and 6 pit in 6th gear when EE hit a pothole in the road. The employee stated the truck bed raised up a little and came down, causing the seat to bottom out. The employee was seen by Occ Med on 9/23/25 and was released without restrictions. On 9/26/25, the employee was seen by Occ Med and was returned to work with restrictions.

The employee was fueling Haul Truck 11 with Diesel Fuel when the hose popped off and splashed the employee in the eyes, face and chest. The operator was wearing PPE during the time of fueling.

Employee stepped in the inlet side of the cell at the tank house. They fell forward and injured left wrist and right shoulder.

Rubber tire driver hit a few potholes and felt a slight pain on EE's chest and low back. When the driver stopped to check equipment, EE felt dizzy and could not stand.

Haul Truck operator hit an unknown bump, a few minutes after began to feel pain in EE's back.

The employee was in the cab of the radial stacker when the 2450-002 luffing system base failed at end of shift causing the stacker cab to drop to the right side. The operator in the cab, experienced some discomfort to the left leg after the luffing system failed.

Employee was transporting a part (Core) by forklift when the part fell off the pallet during transport. The employee smashed their left hand between the part and pallet while lifting the part back onto the pallet.

While employee was walking under EE's truck on the driver's side for an air valve check, the right foot slid out from underneath EE. This caused all weight to shift to EE's left side and resulted in a left ankle sprain.

Truck driver was walking toward line up room in parking area. EE rolled EE's right ankle which resulted in an avulsion fracture

Shovel Operator was exiting the cab when EE tripped and fell on the metal grating. EE has cuts to EE's eyelid, cheek, nose and lower lip. EE received two stitches to lower lip.

Employee was walking when they tripped and fell on metal grating walkway causing abrasion on right wrist

Employee was fusing 4-inch T's when the employee bent over and grabbed the handle of the fusion machine. The employee's lower back locked up. The employee stated pre-existing injury.

While disconnecting the rear hose attachment of the CCV003 (Vac Truck) to clear a plugged hose, the top part of the hose whipped back and hit the employee's front tooth, cracking the bottom part of the right front incisor (central) tooth.

Employees were lifting a piece of ductwork into place to align the flanges to mark the holes, the ductwork pipe shifted pinching employees' thumb between the flanges resulting in a Laceration/Avulsion.

Employee was tightening lugs on tire when employee set impact gun down and smashed left pinky finger between rim of tire and impact.

Our employee was gathering equipment at the jobsite and accidently tripped on a cable tray. As EE reached out to break EE's fall EE came in contact with a sharp piece of pipe where EE cut EE's right hand. Our employee was taken to an urgent care facility where EE received 5 stitches in EE's right hand.

Employee was removing panels from screen media with Air Tugger, when employee was holding Air Tugger chain with EE's left hand. Employees left hand became lodged in the Air Tugger Block causing laceration to EE's left hand.

While loading Haul Truck 36, a shovel operator trainee made contact with the back of HT36 with the dipper. After dumping the operator continued onto an additional run at Shovel 3. After another full load/dump cycle, the operator stated they felt neck and back pain.

While driving through SH3 pit, a haul truck trainee employee hit a rough spot in the road. Initially the employee stated they were ok but after another run, they told their mentor that they were experiencing back pain.

Haul truck dumped out and was traveling to the next assignment. As EE headed down the Power ramp, EE's truck began to slide due to the roads being slick from the weather event just before the shift. Driver tried to correct the slide, and EE made contact with the berm with the right front corner.