Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
A non-injury roof fall occurred in the #3 entry on the Southwest Mains at survey station #994. The fall measured approximately 20 feet wide by 8 feet high by 80 feet in length. It is not affecting or impairing ventilation. It is located in a return air course. We do not intend on cleaning the fall up. We are dangering it off. No person(s) or equipment was involved in the fall.
A non-injury roof fall occurred on the #3 Belt Conveyor on Northwest Mains at survey station #546. The fall measured approximately 20 feet wide by 5 feet thick by 50 feet in length. A roof fall clean up plan has been submitted to MSHA and has been approved for clean up of the fall. This fall was immediately reported to MSHA. No person(s) were involved in the fall.
A non-injury roof fall occurred in the #4 on the Southwest Mains at survey station #976. The fall measured approximately 20 feet wide by 8 feet high by 50 feet in length. It is not affecting or impairing ventilation. It is located in a return air course. We do not intend on cleaning the fall up. We are dangering it off. No person(s) or equipment was involved in the fall.
Roof Fall--70' in by the survey station #1042 in the cross cut between #4 entry and #3 entry on the 2nd Northwest Mains 3,400 feet from our section. This is an area where we pulled back from. It measured 6' thick by 16' wide by 35' in length. It is not affecting ventilation. We will not be cleaning the fall up, we are dangering it off. No employees or equipment was involved.
The accident took place on the haul road at #1 Pond area. EE came to the mine to pick up paycheck. EE left to go home traveling on the haul road. The location where the accident occurred was at the #1 Pond area, EE hit a coal truck head on in a curve driving EE's personal vehicle. EE was treated by Elite ambulance technicians and transported to ARH hospital in South Williamson.
The fall was located at the Northwest Mains 70' inby survey station 777 in the #6 intake entry. 30' wide by 30' long by 4' thick. Dangered off not cleaning up. No persons or equipment involved.
The location the fall took place was #1 entry 20 feet inby survey station 1021 of the Southwest Mains. The fall was 19' wide by 30' long by 8' thick. Dangered off not cleaning up. No persons or equipment involved.
Fall was outby survey station in the #2 neutral entry on Southwest Mains. It fell in an intersection and measured 30' long by 30' wide by 8' in thickness. It was located approximately 1800' outby the 010 mmu. No persons or equipment were affected by the fall. Set at least 2 rows of timbers on each side of the fall. Do not intend on cleaning the fall up. No ventilation was impaired.
The fall occurred in the #1 return entry of Southwest Mains 70 ft inby survey station 970. The fall was in an intersection and measured 20 ft wide by 20 ft long by 8 ft thick. The fall did not impair ventilation and we do not intend to clean up the fall. It was blocked off by setting 8 breaker timbers in all entrances. No persons or equipment involved. Roof fall only.
The fall occurred at the crosscut entry between #5 and #6 intake entry 140ft inby survey station #983 located on the Southwest Mains. The fall measured approximately 30ft long by 18 to 19ft wide by 7 to 8ft thick. The fall did not impair ventilation or obstruct the primary escape way. No persons or equipment were involved. The area was blocked off and isn't intended to be cleared.
Completed project, carrying survey equipment slipped and fell
A fall measuring 20' wide X 25' long X 4.5' thick occurred at 140' inby survey station 925 in the #7 right return entry on the Northwest Mains. The fall will not be cleaned up. We are re-routing the return around the fall. No persons of equipment were effected. All entrances to the fall will be barricaded with timbers or cribbed off
A piece of draw slate approximately (3 foot by 2 foot by 3 inches thick) broke across the strap and fell striking ee. Injured miner was transported to a medical center. Due to medical complications from the injuries ee sustained ee died on 4/6/17
A roof fall measuring approximately 20' wide by 20' long by 6' thick was discovered 60' inby spad 403 in the #2 entry of west - sub mains. The fall will not be cleaned up.
The mine had a roof fall at survey station #10 in an intersection. The fall measured 30' L. X 7' Thick X 12' W. An addendum to the approved roof control plan will be submitted to MSHA to rehab the fall area.
EE said he strained his back when lifting a shive wheel for a belt take up unit.
EE said mantrip hit rock or hole and jolted him causing lower pain.
We had a roof fall measuring 4 to 5 feet thick X 19 to 20 feet wide X 70' in distance. This fall is a continuance of a fall reported on 1/5/12 on the 2nd North West Mains @ Spad #1341 in the #4 and #5 entries. This fall does not impede ventilation or travel-The fall will not be cleaned up-There were no injuries.
A roof fall in old works in No 7 Entry 70 ft inby spad No 1130 approx 10 ft wide, 10 ft long, about 5 ft high. the fall will not be cleaned up.
A roof fall occurred in the old works (in rooms) in 5th Right off 2nd North West Mains at spad No. 1364 No. 6 Entry. The fall is approx 30 to 35 ft long, 20 ft wide and 4 1/2 ft to 5 ft thick (Ht). The fall will not be cleaned up.
A roof fall occurred on 1-5-12 in 2nd North West Mains at spad #1341. The fall is approx 30 to 35 ft long, 20 ft wide and 4 1/2 to 5 ft thick (no injuries) and the fall occurred in old works and will not be cleaned up (in #5 Entry)
Mechanic was performing maintenance on John Deere 850c Dozer when he slipped and fell from the tracks to the ground injuring left leg.
He was getting a tire for the man trip when he slipped and fell (on ice). He did not cease work, he went to the doctor on 2/2/11. He still worked until 3/22/11 (that was his 1st day off work). He went to the hospital and they operated on his left shoulder on 3/22/11.
EE was using a torch to cut bracket to change water hose,accidently cut hydraulic hose and threw oil in his face and hands (burns).
He was hanging a cable when a piece of draw rock fell and hit him in the back.
EE was standing beside of the roof bolter when a piece of draw rock hit him on the left shoulder
Employee was removing gob from #4 tailpiece. The gob was coal and rock mixture, a piece of rock fell thru and rolled onto right index finger, smashing the employees finger.
He was installing curtain boards and when he was removing drill steel, he rotated the steel and the drill steel hit his forearm.
EE was cutting a zip tie and the blade came out and cut his right hand.