Buscar en el registro

Employee was operating a Front End Loader for several hours. At the end of EE's shift EE felt sore. On 4/30/25 we were notified that the Employee sought medical treatment. EE was Dx with a Left shoulder strain and was given restrictions. Employee was moved to Light Duty. Reporting within 10 days.

Employee was descending from the Superior Guardian Tandem 7203 Screen Plant (Unit #273) using the ladder when EE felt a large pain in EE's left knee and it locked up. EE continued working until around 10 a.m. when EE decided EE needed to have it checked out. Per the doctor EE sprained EE's left knee from planting wrong while descending from the Screen Plant.

On January 19th, 2022 at 8:29 am rocks came off the east highwall striking the employee from approximately 38-42 feet up the highwall. The employee sustained multiple injuries to their head, arm, and leg.

Employee entered dozer cab to verify need for fueling, while looking at gauge door blew shut by a gust of wind trapping left fourth finger causing broken nail and crushing injury to left fourth finger.

Employee climbed step ladder to fuel Roll Plant in quarry. When descending, both feet on ground, one foot was on top of a rock. EE pivoted & foot on rock caused to lose balance, did not fall. EE was able to walk on the foot. Told supv. that they "took a digger". After seeking treatment, determined to be a R ankle sprain. We accommodated light duty and there was no lost time.

The injury occurred when a trained miner fell from a height of 4 to 5 feet onto the rock floor of the quarry. The condition contributing to the fall was the miner placing himself in an elevated position with no tie off. There was one injured party.

Fell on ice patch while walking around a conveyor, one foot on gravel other on ice patch, struck right shoulder on ground.

A ground person was assisting the operator of a skid steer in a task that required the ground person to hold power cords up and away from travel way of skid steer. Skid steer oper. toured sharply to the right causing rear left co new to come in contact with ground person right forearm causing it below the elbow

WHILE ASSISTING TO FREE AN OVERSIZED ROCK IN THE PLATE FEEDBOX AT PRIMARY CRUSHER, HIS FINGERTIP WAS PINCHED BETWEEN CHISEL AND SIDE OF FEEDER WHEN THE STONE CAME LOOSE.

WHILE REMOVING A WORN PIECE OF SCREEN CLOTH FROM SCREEN BOX, THE OPERATOR TURNED TO RELEASE SCREEN PANEL TO ALLOW IT TO FALL TO THE GROUND. WIRE BECAME ENTANGLED IN OPERATORS GLOVE DRAGGING HI M TO THE GROUND.

OPERATOR WAS IN THE PROCESS OF SHUTTING DOWN PIECE OF EQUIPMENT WHEN HE SLIPPED ON A SNOW COVERED ICED OVER SUPPORT IRON FOR CLUTCH ASSEMBLY STRIKING HIS LEFT SHOULDER.

INTHE PROCESS OF CUTTING THE SPLICE OUT OF A CONVEYOR BELT, EE USING A UTILITY KNIFE CAME OUT OFBELTING & STRUCK INNER PART OF LEFT FOREARM. EE LOST NO TIME

EE SLIPPED FALLING BACKWARDS AGAINST A GUARDRAIL-BUMPING HIS LEFT SIDE ALONG UPPER PELVIS AREA.

WHLE REMOVING A CHUTE FROM END OF SCREEN BOX, THE CHUTE TIPPED, PINCHING RIGHT THUMB BETWEEN AN ANGLE IRON AND THE CHUTE, CAUSING COMMUTED FRACTURE TO RIGHT THUMB.

WHILE ASSISTING INSTALLATION OF PITMAN ASSEMBLY INTO CRUSHER FRAME, IT BECAME NECESSARY TO USE A PORTA POWER AS HYDO JACKING DEVICE. THIS DEVICE WAS BRACED AGAINST HIS CHEST AND WITH JACKING M OTIBAS WITH ARMS, THE PROJECT COMPLETED. THIS JACKING MOTION MAY HAVE STRAINED MUSCLE IN AREA NEAR HIS HEART.

OPERATOR WAS DECENDING A PRIMARY CRUSHING UNTI AND MISJUDGED WHICH LADDER STEP HE WAS ON HE WAS ON THE SECOND FROM LAST STEP BUT THOUGHT HE WAS ON THE LAST, HE FELL BACK TO THE GROUND JAMMING HIS LEFT THUMB AND WRIST.

OPERATOR WAS STEPPING OUT OF A NEW HOLLAND SKID STEER LOADER WHEN HIS FOOT SLIPPED OFF THE TIRE HE WAS STEPPING ON SPRAINING HIS RT ANKLE

SCREEN PLANT OPERATOR'S FOOT SLIPPED OFF DISCHARGE EDGE OF CHUTE ON SCREEN PLANT CAUSING HIM TO BRUISE HIS SHIN.

OPERATOR OF H-100C FRONT END LOADER S/N359-307-UO1578.WHILE DESCENDING A RAMP, NORTH-SOUTH RAMP APPEARS TO HAVE DRIVEN OFF WEST EDGE OF RAMP TAKING BOOM OFF RAMP EDGE WITH BUCKET OF LOADER.

MUD CONDITIONS MAY HAVE LET TO EMPLOYEE SLIPPING ON TAPERED PLATE WHILE TUTTING A SIDE DISCHARGE CONVEYOR INTO CRUSHING FLOW.

DAMP MATERIAL CLINGING TO CONVEYOR BELTS AND DROPPING TO GROUND. THIS MATERIAL WAS BEING REMOVED FROM UNDER CRUSHER WITH A FLAT FACED SHOVEL. EMPLOYEE BEGAN TO FEEL PAIN IN LEFT SHOULDER BLADE - RECEIVED MUSCLE STRAIN.

WHILE SHUTTING DOOR ON OPERATORS CAB, OF PRODUCTION LOADER, INJURED PINCHED HIS FINGER BETWEEN LATCH ASSEMBLY AND DOOR XXXXX. HE CUT HIS RIGHT MIDDLER FINGER NEED THE TIP ON THE BOTTOM OF FIN GER PRINT AREA.

EE WAS STANDING ON A LADDER WORKING ON CRUSHER REPAIR, WHEN THE LADDER SHIFTED CAUSING HIM & LADDER TO FALL TO THE GROUND, INJURING HIS LEFT KNEE.

WHILE STEPPING DOWN FROM PLATFORM DESIGNED FOR CHECKING OIL ON VME 270 WHEEL LOADER, OPERATOR PLACED FOOT ON CABLE STYLE STEP WITH LEFT FOOT & TO THE GROUND WITH RIGHT FOOT. RIGHT FOOT CONTACT ED UNEVEN GROUND TURNING ANKLE OUTWARD & CAUSING EMPLOYEE TO FALL TO THE GROUND.

WORKING ON A BEARING ON A BOOT PULLEY & WRENCH SLIPPED & HIT HAND ON PULLEY

LARGE STONE BRIDGED IN JAW CRUSHER UNABLE TO PULL WITH CHAIN SO BREAKING OFF A CORNER BECAME NECESSARY WITH THE USE OF SLEDGE HAMMER STANDING IN A UNCONFORTABLE OR AWKWARD POSITION AND ATTEMPT ING TO STRIKE A BLOW TO LODGED STONE WITH REPORTBLOWS FOR A SOME WHAT LONG PERIOD OF TIME.

WHILE STOPPING THE UNIT YOU DISENGAGED THE CLUTHC AND JAMMED THE RIGHT THUMB ON THE CLUTCH LEVER.

WHILE STEPPING DOWN FROM FUEL TRUCK STEP BROKE UNDER OPERATORS WEIGHT CAUSING RIGHT FOOT & JAW THE GROUND INJURING KNEE AREA.

WHILE MAKING A DRILL STEEL CHANGE A COUPLER IS USED TO JOIN TWO STEELS TOGETHER. THIS COUPLER CAME LOOSE FROM SHANK WHICH IS PART OF THE HAMMR USED FOR BORING HOLES IN LIMESTONE. THE COUPLER FELL ABOUT 12' STRIKING OEPRATOR ON HAND HAT AND MUFF TYPE HEARING PROTECTION THIS IMPACT CAUSED THE MUTT TO PUSH IN ON HEARING AID WORN BY OPERATOR CAUSING A CUT TO INNER AS WELLA S OUTER AR

DURING THE COURSE OF HER DUTIES AS A LOADER OPERATOR, THE CONTINUOUS AND REPETITIVE MOTION OF STEERING THE LOADER HAS CAUSED HER TO BRING ON A "ROTATOR CUP IMPINGEMENT".

HE WAS ASSISTING IN THE CHANGING OF BEARINGS ON A VIBRATING SCREEN. HE WAS STANDING ON AN AREA THAT WAS BEVELED WHICH STRAINED THE TENDONS IN HIS RIGHT ANKLE AS HE WAS WORKING, BUT IT WASN'T N OTICEABLE UNTIL THE ANKLE HAD A CHANCE TO REST.

HE WAS WORKING ON THE CRUSHER WHEN A BAR HE WAS PUTTING IN PLACE SLIPPED AND HIT HIM IN THE HEAD.

INDIVIDUAL WAS SHOVELING PORDUCT OFF CONVEYOR WHEN FRONT END LOADER BUMPED CONVEYOR AND INDIVIDUAL JUMPED OFF & INJURED KNEE.

WHILE INSTALLING SCREENS EMPLOYEE FELT HE TWISTED HIS BACK.

WAS WORKING ON HIS PLANT AT THE SHOP. AS HE WAS COMPING DOWN THE LADDER, THE LADDER SHIFTED AND CAME OUT FROLM UNDERNEATH HIMCAUSING HIM TO FALL TO THE GROUND LANDING ON HIS SHOULDER. HE MAY HAVE A TORN ROTATOR CUP.

WHILE CLIMBING ON THE PRIMARY CRUSHER LADDER, THE EMPLOYEE HIT HIS KNEE ON ONE OF THE LADDER RUNGS, A STATIONART METAL OBJECT, CAUSING IMMEDIATE AND INCREASING IRRITATION.

PULLING ON WRENCH DURING REPAIR ON CRUSHER.

HE WAS STANDING ON THE PLATFORM OF THE BREAKER, LEANING AGAINST THE RAILING WHEN THE CRANE OPERATOR FROM ROON SALVAGE MISJUDGED HIS DISTANCE AND SMASHED THE BUCKET INTO THE RAILING THAT HE WAS LEANING ON, CAUSING HIM TO LUNGE FORWARD, JARRING HIS NECK AND BACK.

WHILE CRUSHING STONE A LARGER STONE BECAME LOADGE IN JAW CRUSHER JAMBER, IN AN EFFORT TO DISLODGE IT A WEDGE DEVICE USED FOR THIS TYPE OF SITUATION, WAS INTRODUCED BETWEEN THE MOVABLE JAW AND TH LODGED STONE. THE WEDGE CAME OUT OF THE JAW CHAMBER STRIKING THE OPERATOR ON THE NOSE AND LIP AREA.

SLIPPED ON A ROCK AND FELL ON LEFT ELBOW.

HE WAS STANDIN D ON CRUSHER WHEN HE SLIPPED AND FELL HITTING HIS CHEEK ON METAL BAR

I.NAME WAS POUNDING OUT SCREENS ON THE CRUSHER WHEN HE EXPERIENCED SORENESS IN HIS ARM. IT CONTINUED TO GET WORSE DURING THE COURSE OF THE DAY UNTIL HE DECIDED TO GET IT CHECKED.

OVERALLS WERE CAUGHT IN CONVEYOR ROLLER WHICH THEN PULLED HIS HAND INTO THE CONVEYOR ROLLER RESUTLING IN THE INJURY.

WHILE I.NAME WAS POUNDING OUT SCREENS HE EXPERIENCED A SORENESS IN HIS NECK WHICH INCREASINGLY GOT WORSE AND TRAVELED DOWN HIS ARM AND INTO HIS HAND.

WHILE POUNDING OUT THE SCREENS HIS ELBOW HIT A CORNER OF THE VIBRATING SCREEN DECK.

SHOVELING UNDER CRUSHING EQUIP EMPL STRUCK STONE WITH BLADE OF SHOVEL JAMMING RIGHT WRIST.LATER PM DIAG AS SPRAINED-TREATED EMERG RM,RELEASED.

WHILE REPIARING CRUSHING UNIT AT SHOP YARD EMPLOYEE WAS CLIMBING AROUND THE MACHINE AND HIT HIS RIGHT KNEE ON ANGLE-IRON MEMBER.

SECONDARY CRUSHING UNIT REPAIR WAS BEING PERFORMED WHICH INVOLVED CUTTING A PIECE OF CONVEYOR BELTING TO BE USED AS A STONE GUARD.DURING THE PROCESS THE EMPLOYEE SLIPPED WHILE PUTTING DOWNWARD PRESSURE UPON THE UTILITY KNIFE.THE KNIFE PUNCTURED HIS LEG AND BROKE OFF WITHIN HIS LEG.