Buscar en el registro

Employee was working under machine while servicing a loader CO UNIT# L-27 when dust fell into their right eye. Employee went to urgent care after flushing eye and still feeling like something was in it, employee was told nothing is in there and there were some scratches. Employee returned to work next day.

Employee was lifting scale parts off a pallet when EE's left thumb got stuck between two parts. EE went to the ER and hand specialist. EE has a break in EE's thumb.

Employee was driving company unit L-27 mini loader when the right window swung open, then swung back and shattered causing glass to go all over employee causing minor cuts on right arm and hand. On 8/7/25 EE noticed EE's right hand was swelling up. EE reported the accident on 8/8/25, and went to urgent care. They put EE on antibiotics and gave no restrictions to return to work.

Employee was walking up steps to get to 5-1/2' cone crusher when EE tripped on the 5th step and fell hurting EE's left leg above EE's ankle. EE was brought to the emergency room by EE's supervisor and put in a walking boot.

The employee was using a shovel to try and get a rock out of the #1 conveyor belt scraper when EE hit hand on the conveyor. The next day the hand started swelling up so EE went to see a doctor. They told EE EE fractured the thumb and put EE on restricted duty for two weeks.

Employee was changing a screen panel on the #2 screen, while picking up the screen panel, EE was cut by a sharp piece of metal on EE's right hand middle finger.

Employee was trying to turn a butterfly valve when they lost footing and fell. They felt pain in their upper back.

Employee was using a come along to change head pulley bearings when their right index finger got cut by getting caught between the come along and the conveyor transmission/gearbox.

Employee was using water wash hose to clean under crusher when the water sprayed back at the employee, causing something to go into right eye. Employee was wearing safety glasses.

Employee was looking at an air chuck quick connect that had broken, when EE felt something possibly dirt in the right eye. Brought to urgent care after trying to flush eye on site. Doctor didn't find anything, but prescribed eye drops due to possible scratch in eye since employee still felt irritation in eye.

Employee was working on the #1 conveyor removing a pulley with a pry bar and the pry bar hit them on the left side of the face causing a facial contusion.

Employee was walking with a shovel to clear snow from a storm and slipped on ice. EE hit their head on the ground when they fell.

Employee notified yard foreman on 01/12/2024, that on 01/04/2024, EE was digging a rock out of a cone crusher, when EE hurt EE's hip or back. EE made an appointment with a doctor for 01/17/2024. The doctor prescribed EE medication, and gave EE a note on 01/18/2024 that EE was able to return to work regular duty.

Employee was using a razor knife to cut drive belts that were hanging from HP400 Crusher when employee cut self with the knife on left arm.

Employee was exiting Hyundai HX300 Company #E-8 excavator. When EE went to come down off the track, EE felt the ball of EE's left foot become sore. EE went to the emergency room to get checked, and they said EE has a possible fracture and needs to see an orthopedic doctor.

Employee was using cutting torch and grinder to repair a rock crusher main frame liner, when a piece of metal went up under the face shield and safety glasses into EE's eye.

The miner was grinding a steel plate when the grinding wheel broke apart. The piece that came off cut their right leg requiring going to the emergency room for stitches.

The miner was grinding a steel plate and a small metal chip got into EE's eye. EE was wearing eye protection.

Employee was climbing down off of loader when EE slipped and fell off the loader steps and felt pain in lower back, hip and hamstring.

The employee was moving/relocating a portable LT130 Metso jaw crusher. The employee was wearing a hard hat. A rock fell off of the top of the machine around the feeder area, which they saw the shadow of and looked up and the rock struck them in the head under hard hat.

The miner was working on replacing a tramp release cylinder on a cone crusher, and went to use a hammer to remove a pin. The hammer slipped and hit EE's middle finger causing a cut.

Employee was lifting an air compressor off a pick up truck when employee slipped and fell. Employee's back hit the side of the truck and the compressor landed on employee's right leg.

While shoveling felt a pop in right shoulder.

While doing plumbing work, the employee caught left hand thumb between a pipe wrench and a jaw wrench. This caused the finger nail on EE's thumb to tear, EE went to the hospital where they gave EE stitches to repair it.

Rock fell off a conveyor striking the employee in the back

While operating an end dump, the employee started experiencing soreness in the left knee, as the day went along it got worse.

While adjusting a rubber curtain with a razor knife the employee cut EE's index finger

Employee got out of truck, while walking to office stepped on a stone and twisted right knee. Employee refused treatment until 10/30/19.

I was walking through some brush to take a water sample and a branch/plant brushed my eye.

The employee was carrying a bucket shroud, climbing over shot rock to get to the excavator on its perch. EE lost balance, fell, and thumb was crushed between a rock and the shroud. EE's thumb split open and required eleven stitches.

Employee was cutting wrapping material with a razor knife away from the head shaft on the 4 1/4 cone crusher when they sliced their thumb.

Employee was lifting a 5 gallon bucket of paint and strained back.

Employee was descending a wet plant stairway when the employee slipped and lost footing. Employee leaned back and wrenched shoulders trying to prevent self from falling.

Taking apart accumulator on Liebherr L-6 loader when pressure released and oil burst out and got in eyes. Employee also jerked back and hit head.

EE was backing a 35 ton Terex haul truck up to the hopper at the rock plant. EE was leaning out the window looking to the rear when the left front tire exploded. The force of the blast blew EE back into the cab and lifted EE off the seat. EE injured EE's neck, arm and left side and may have hit EE's head.

Employee was climbing off a Cat D8 that was in the shop for repair. When ee stepped off the machine, ee rolled ankle and had a hard landing on the shop floor. The following day ee went to the doctor's to have it examined. EE has a broken fibula and torn ligaments.

Employee was attempting to connect a 3" hose with a cam lock fitting to a pipe. EE jammed hand against the screen while pulling on the hose and broke finger.

Employee was holding a slug wrench while another employee was striking it with a hammer. Employee swinging hammer missed the wrench and hit injured employee's hand.

Employees were cutting a bolt out of a screen. EE was attempting to knock the bolt out and a piece of hot slag landed on EE's face near eye. When EE tried to brush it off, brushed it into eye. EE was wearing safety glasses at the time of the injury.

Employee was on a walkway on the crushing plant. EE ducked down to walk under a conveyor, and when ee stood up ee felt a "pop" in knee. It didn't bother ee until ee got home, when ee felt pain when trying to bend leg.

Employee was assisting cleaning out a jammed chute when they cut their wrist on a sharp rock. Cut was bleeding so employee was transported by company to the local emergency room where they received (2) stitches to close cut.

The employee was pulling on a breaker bar (ratchet) which disconnected from the socket causing the employee to slip and twist employee's left knee.

Employee was working reinstalling a repaired feeder. EE jammed EE's hard hat against the feeder, which caused the hard hat suspension to knock a stud that holds EE's hearing aid into EE's ear out. The employee is scheduled for surgery in January to repair this problem and will require a two week recovery period out of work.

Employee felt a pull in back while working on replacing a conveyor belt. EE was working overhead putting the belt on. EE notified supervisor at the end of the day but did not think it was a big problem. EE worked regular shifts until Friday, March 4th, when EE called in and said they needed to have it checked, that it wasn't getting better.

Employee cut his knee while cutting a piece of rubber belt.

We were in the process of pulling the moveable die from the C125 crusher when the die moved forward and pinched employee's foot between both jaw dies.

While working with another employee to install a return roller, the roller slipped out of ee hands and hit him in the nose.

Employee noticed eye irritation but thought it was an eyelash in eye. Never reported this to anyone at the time. Called supervisor at home at 7:00 pm to tell him he thought he had metal in eye and was going to the emergency room.

Employee was standing on a catwalk lifting a screen panel to hand up to another employee when he felt his left elbow "pop."

One employee was on a ladder (wearing fall protection gear) when the ladder slipped out from underneath him, due to ice. The injured employee attempting to help, put the ladder back and proceeded to climb the ladder to get the hanging employee back on. The ladder slipped out a second time, and he was injured when he fell.