Buscar en el registro

Employee moving steel, pinched middle ring finger. Bruised finger and resulted in blood build up behind nail. Middle ring finger subungual hematoma was drained (blood drained from under finger nail), three day work restriction.

Prepping plant for production. Released a discharge gate and caught hand in gate. Cut/Abrasion to hand resulting in 3 stitches.

Helping grind and something (dust or irritant) got behind safety equipment and irritated eye. Classified as Right eye irritation/abrasion.

Employee removing drain plug from machine, leveraged self for additional force and bruised right chest rib. Diagnoses was Right Chest Contusion.

Employee cut finger while cutting conveyor belt.

While in man lift, employee caused lift to bump him into beam, bruising chest

Brushed hand on excavator track and cut right 4th finger on chert or track pad. 4 sutures

Employee slipped getting something out of bed of truck and fell against a gear that was in the bed of the truck. Impact broke skin.

Repairing conveyor belt, cranking on ratchet hoist, hoist failed, EE lost balance and fell backwards landing on tailbone and right hand.

Exiting dump truck, wind gust blew door and struck hand.

EE pinched his hand in the door resulting in a laceration.

Stepped on rock, twisted left knee.

Employee aggravated pre-existing knee injury (hockey injury). When applying pressure to raise up, knee popped.

Moving steel plate, plate slipped and pinched end of finger, resulting in rupture of skin approx. 1/4".

Stepped out of truck and stepped on rock and twisted ankle.

Moving oil barrel, strained back.

Reparing primary crusher, strained back while lifting part/componet.

Employee working on conveyor belt, hand pinched in v-belt drive.

Picking up shims to a water pump during repair, shim cut left ring finger.

Employee was tarping equipment prior to move, tarp strap broke, employee lost balance and fell.

EMPLOYEE ATTEMPTED TO LIFT STEEL DOOR TO INSTALL ON CRUSHER AND STRAINED BACK. NOTIFIED OF ACCIDENT / STRAIN ON 8/11/05.

Employee was cutting flashing with box cutter. It slipped and cut right hand.

EMPLOYEE WAS ASSISTING WITH THE CUTTING OF TIMBERS, ONE TIMBER SHIFTED & MOVED WHILE RELOCATING ANOTHER TIMBER, EE'S ARM WAS STRUCK & BROKE.

Employee using a grinder, slipped and cut left leg (thigh).

EE WAS USING A PIPE TO EXTEND A WRENCH, WRENCH EXTENSION BROKE, PIPE STRUCK TOE.

EE WAS INSTALLING BELT ON SECONDARY CRUSHER. PINCHED PINKY FINGER BETWEEN BELT AND PULLEY.

EMPLOYEE WENT TO LIFT DRILL STEEL, FELT PAIN IN BACK.

EMPLOYEE WAS REPAIRING CONVEYOR BELT, KNIFE SLIPPED AND CUT THUMB.

EE WAS CLEANING OUT SECONDARY CRUSHER THAT HAD PLUGGED UP. ROTOR ROLLED AND PINCHED RIGHT FOOT.

EMPLOYEE SLIPPED WHILE IN THE BED OF MECHANICS TRUCK, FELL AND LANDED ON PIECE OF STEEL, LACERATION ON LEFT PALM.

CLIMBING ONTO LOADER, SLIPPED ON WET TIRE AND LANDED ON GROUND, IMPACT ON HEELS.

EE WAS CHANGING STEEL ON DRILL. STEEL SLIPPED AND STRUCK RIGHT ARM.

SLIPPED & TWISTED ANKLE WHEN CLIMBING INTO HOPPER TO HELP CLEAN FEEDER

EMPLOYEE PULLED OR STRAINED MUSCLES IN HIS BACK WHEN LIFTING DRILL STEEL.

EMPLOYEE WAS DRIVING A STOCKPILE TRUCK AND ATTEMPTED TO CLIMB A GRADE IN TOO HIGH GEAR. THE TRUCK DIED & HE LOST HIS BRAKES.

EMPLOYEE WAS CARELESS IN STEPPING OFF LADDING FUELIGN EQUIPMENT.

EE WAS TRIPPING TAILGATE ON DRUMP TRUCK AND LEVER CAME DOWN AND BUSTED HIS UPPER LIP OPERA.

EMPLOYEE WAS CHANGING A TIRE ON A STOCK PILE TRUCK. WHEN HE LIFTED THE TIRE OFF THE GROUND, HE FELT A POP IN HIS RIGHT WRIST.

EE WAS STANDING LOOKING INTO THE DUMP BED AT THESTOCKPILE TRUCK WITH ARMS OUTSTRETCHED, HE FELT SOMETHING GIVE IN HIS RIGHT SHOULDER

EE WAS HELPING CLEAN THE SCREENS ON CRUSHER AS HE STEPPED AWAY FROM THE WORK AREA HE TWISTED HIS LEFT KNEE.

EMPLOYEE WAS HELPING TO CHANGE THE FLASHING ON THE DOUBLE IMPELLER WHEN HE NOTICED HE HAD BROKEN OUT IN A RASH. SUPERVISOR TOLD HIM TO GO HOME-HE WEN THOME TOOK A SHOWER & WENT ON TO THE HOSPI TAL FOR TREATMENT.THE GENERAL CAUSE OF THE RASH WAS UNDETERMINED UPON TREATMENT FROM THE EMERGENCY ROOM.

EMPLOYEE WAS REMOVING COVER FROM SPOUT ON A BARRWELL FOR MAINTENANCE. HIS FINGER SLIPED ACROSS THE ALUMINUM COVER AND CUT IT.

EMPLOYEE WAS PUTTING FUEL IN A TRACK LOADER, TOOK A STEP BACK AND FELL OFF THE TRACK LANDING ON HIS HANDS AND KNEES ON THE GROUND.

EE WAS USING AN EXPLOSIVES STAINLESS STEEL KNIFE TO OPEN A CASE OF EXPLOSIVES. THE KNIFE SLIPPED AND CAUSED A SMALL PUNCTURE WOUND ON HIS LEFT LEG.

EE WAS MOVING THE DRILL. HE HAD A HOSE IN THE WAY AGAINST CO SAFETY POLICY TRIED TO KICK IT OUT OF THE WAY IN THE PROCESS THE DRILL RAN OVER HIS FOOT BREAKING HIS 2ND TOE OF HIS LEFT FOOT.

THHE CARELESSNESS OF ONE EMPLOYEE, HE BACKED HIS EUCLID INTO THE EMPLOYEE INJURED, (AGAINST THE DRIVERS DOOR) THE CARELESS EMPLOYEE WAS TERMINATED.

EMPLOYEE WAS HOLDING STEEL THAT WAS BEING WELDED& GOT BURNS FROM FLASH OF WELDER.

EMPLOYEE WAS SWINGING A HAMMER - THE EMPLOYEE LIFTED THE HAMMER OVERHEAD WITHOUT CHECKING CLEARANCE & STRUCK HIS HAND ON A CROSSMEMBER.

EMPLOYEE WAS HELPING TO INSTALL A HOOD BACK ON A SCRAPER THE WEIGHT SHIFTED & KNOCKED HIM OFF BACKWARDS

DIAGNOSED AS A HEAT RELATED ILLNESS.