Buscar en el registro

EMPLOYEE WAS WALKING FROM CATWALK TO THE TOP OF #5 SHAKER ON PLANT.

EE WAS WALKING FROM SCALE HOUSE TO OFFICE HE TRIPPED ON A HIGH PLACE IN CONCRETE AND FELL.

EMPLOYEE WAS CLEANING WASTE MATERIAL UP WITH A SQUARE POINTED SHOVEL FROM BENEATH THE 3645 IMPACT CRUSHER. HE SAID THAT WHEN HE TURNED AROUND WITH A SHOVEL HIS BACK STARTED HURTING.

THEY WERE CHANGING 1" SCREENS ON BOTTOM DECK OF #2 SHAKER AND HE PULLED ON SCREEN TO GET IT IN POSITION. HE SAID THAT A MUSCLE WAS OUT OF PLACE IN HIS LOWER BACK.

INJURED WAS REMOVING AN OLD BEARING RACE OFF OF A TAIL PULLEY WITH A HAMMER AND PUNCH.THE RACK BROKE AND A SLIVER OF STEEL STRUCK HIM IN THE LEFT FOREARM.

OTHER AND EE WERE OPENING THE HAMMER MILL DOOR JAKE THE WEST SIDE AND EE THE EAST SIDE HE LIFTED DOOR FOR OTHER TO REMOVE COME ALONG THE DOOR FELL ON EE LEFT ARM.

CLEANING OUT CHUTE MATERIAL FROZEN ROCK IT BROKE AWAY R THUMB STRUCK EDGE OF THE CHUTE

CLIMBED LADDER TO CATWALK TO CLEAN OUT SHOOT. ROCK FLEW OUT OF IMPACT BELOW HIM STRIKING RIGHT EYE.

WHILE LIFTING ON OIL TANK HE EXPERIENCED BACK PAIN HE WAS EXAMINED BY CHICOPRATOR BUT THE NATURE OF THE EXAM WAS NOT CLEAR HE CONTINED TO WORK AND WAS NOT PLACE DON RESTRICTED WORK STATUS ON 1 -23-92, HE SOUGHT TREATMENT FROM A MECIAL DR WHEN HE REPORTED ADDITION PAIN OPERATING A DOZER. THE DR PLACEDHIM ON NO WORK STATUS THE REPORT IS BEING FILED WITHIN WOUT WORKING DAYS AFTER THE

REPAIRING CONVEYOR ROLLERS STEPPED DOWN OFF OF CONVEYOR AND SPRAINED LEFT ANKLE.

MAKING REPAIRS TO PRIMARY CRUSHER INSTALLING WEAR PLATE.LIFTING STEEL WEAR-PLATE AND STRAINED MUSCLE IN GROIN.

PICKING UP A SCOTCH BLOCK OF WOOD.IT SLIPPED STRIKING RIGHT FOOT.

NECK PAIN-RUNNING D7 DOZER FORWARD AND BACKWARD, TURNING HEAD.

HOLDING PUNCH BAR 10 LB SLEDGE HAMMER GLANCED AND HIT LEFT THUMB.

HELPING PUT V-BELTS ON PULLEY.V-BELTS TWISTED FELLOW EMPLOYEE ROLLED PULLEY BACK CATCHING FINGERS BETWEEN BELTS AND PULLEY.ASHED RING FINGER AND LITTLE FINGER OF LEFT HAND.

HEAVY LIFTING FOR A PERIOD OF SEVERAL YEARS CAUSING APPARENT HERNIA,RIGHT SIDE.

REPAIRING CONVEYOR BELT. USING ELECTRIC DRILL TO TIGHTEN BELT FASTENERS. RUST GOT IN RIGHT EYE.

CLEANING HEAD PULLEDY BOX ON CONVEYOR USING A PICK. SOME ROCK WAS IN HEAD PULLEY BOX. WHEN PICK HIT ONE OF THE ROCKS A PIECE OF STEEL FROM PICK BROKE OFF PENETRATING LEFT ARM.

EMPL STANDING ON STEP LADDER TO WELD X-BRACE ON 50 TON TRUCK.LOST FOOTING ON LADDER AND FELL TO GROUND.

EMPL PUTTING WELDING RODS IN IMPACT CRUSHER.RAISED HEAD AND HIT DOOR LATCH WITH FOREHEAD.

REPAIRING EXHAUST SYSTEM ON WABCO TRUCK. RUST FELL INTO RIGHT EYE CAUSING IRRITATION.

CLIMBING CABLE LADDER TO GET IN TRUCK.CABLE CAME LOOSE ON ONE SIDE OF STEP CAUSING EMPL TO SCRAPE LEFT LEG ON STEP.

REPAIRING, WORKING BETWEEN IMPACT CRUSHERS. THE WIND WAS BLOWING AND BLEW DUST IN EYE.

OPERATING AUTOMATIC ELECTRIC WELDER.

OPERATING AUTOMATIC ELECTRIC WELDER.

I NAME WAS IN HIS PICKUP TRUCK CLEARING THE PIT FOR BLASTING FLY ROCK HIT TOP OF CAB FORCING IT ON HIS HEAD

OPER TRACK DRILL IN PROCESS OF CHANGING STEEL

FOREIGN OBJECT BLEW IN EYE.

ASSISTING FELLO4 EMPLOYEE MAKE EREPAIRS TO CONVEYOR DRIVE SPROCKET A 16LB SLEDGE HAMMER CAME OFF OF HANDLE BEING USED BY FELLOW EMPLOYEE STRIKING I.NAME IN LOWER CHEST

WORKING ON GIRT3RUBBER ON CONVEYOR BELT. A FOREIGN BODY ENTERED HIS RIGHT EYE, EITHER FROM THE WIND BLOWING IT IN HIS EYE OR FROM TOOLS HE WAS USING.

DRIVING TRUCK U1 RAMP-SHIFTING & MISSED GEAR TRUCK ROLLED BACKWARDS DRIVER CUT REAR INTO BANK TO STOP - TRUCK TURNED OVER ON RIGHT SIDE

CLOSING HAMMER - MILL DOOR. FOOT SLIPPED ON ANGLE IRON CAUSING HIM TO FALL IN HOLE UNDER SHAFT.PULLED MUSCLES IN BACK.

PUTTING WATER IN DRILL FOR DUST CONTROL. PUT TOO MUCH AIR IN WATER BARREL- END BLEW OUT.

HELPING FELLOW EMPLOYEE DRIVE A GEAR ON HAMMER MILL SHAFT WITH A SLEDGE HAMMER HEAD CAME OFF OF HANDLE STRIKING LEFT FOOT