Buscar en el registro

THE MINOR OPERATOR WAS HAVING PROBLEMS WITH HIS RIGHT SIDE PICK UP CHAIN. HE SAT UP IN THE OPERATORS SEAT TWISTING HIS BODY TO THE RIGHT TO OBSERVE THE CHAIN AND THE MINOR JOLTED AT THE SAME T IME CAUSING THE OPERATOR TO LOOSE HIS BALANCE AND HIT THE TOP.

EMPLOYEE ATTACHED TWO EMPLOYEE BRIME BUCKETS TON ROPER. AS BUCKETS WERE BEING RAISED TO FLOAT DECK ONE FELL HITTING EMPLOYEE ON HER HEAD & FOREAM.

EMPL TRAMMING PORTABLE CONVEYOR TO REPAIR BROKEN TRACK.A PORTION OF BROKEN TRACK BROKE OFF STRIKING EMPL IN RIB CAGE.

EMPLOYEE WAS LIFTING SPROCKET OFF OF FRONT DOCK AND PUTTING THEM IN CAGE (WAREHOUSE).

EMPL WALKING TO WELDING TRUCK AND SLIPPED ON CONCRETE.

EMPLOYEE TRIPPED OVER MINER CABLE WHILE WALKING UP LONGWALL TOWARD MINER.

EMPLOYEE WAS MAKING UP SODA ASH AND WAS BENDING OVER PICKING UP A 100 LB BAG. EMPLOYEE WAS NOT AWARE OF THE SERIOUSNESS OF THE ACCIDENT @ SIX MONTHS LATTER THEREFORE IT WAS NOT REPORTED TO HIS SUPERVISOR UNTIL 6/19/92. USF&G CONTROVERTEDTHE WORKER'S COMP. CLAIM.

EMPLOYEE WAS TRYING TO REMOVE BIT OFF HEAD AND METAL SHAVING FLEW OFF AND GOT EMBEDDED IN EMPLOYEE'S UPPER PART OF LEFT ARM.

EMPLOYEE STEPPED ON EDGE OF GRATING CAUSING HER ANKLE TO TWIST.

EMPLOYEE SLIPPED WHILE CARRING OLD THOUGH IDLER.

EMPL PARKED SEATED IN VEHICLE WITH LEG UNDER HIMSELF AND FOOT EXTENDING ON SIDE OF VEHICLE.STARTED TO TRAM VEHICLE -SCOOTER AND STRUCK ANOTHER BEHICLE PASSING BY.TIRE TO TIRE.CAUSING FOOT TO B E STRUCK BETWEEN I-BEAM AND THE SEAT OF SCOOTER.

CUTTING BELT WITH KNIFE LACER L RING FINGER

EMPLOYEE SLIPPED ON STEPS DUE TO MUD ON BOOTS EMPLOYEE HAD SURGERY ON 7/29/91 AND WAS ABLE TO CONTINUE WORK. EMPLOYEES INJURY HAS NOT REQUIREDSURGERY AND HAS BEEN ABLE TO WORK.

MOVING BOLTER STRUCK HEAD AGAINST TOP

EMPLOEE WAS WALKING AROUND ON OVERHEAD MOBILE CRANE AND STEPPED ON A CRUST OF PRODUCT WHICH HAD BEEN WASHED UNDER BY WATER GIVING WAY CAUSING A DROP OF APPROX. 4" TO 6". THIS PATH WAS NOT A NO RMAL TRAVELWAY.

EMPLOYEE LIFTED A BOX WEIGHING ABOUT 60LBS SET THE BOX ON TOP OF THE DESK & FELT A PAIN IN HIS LOWER BACK

EMPLOYEE WENT TO LIFT A DRAG RAIL FOR SHUTTLE CAR

EMPLOYEE WAS GOING TO GET SAMPLE OF POTASH FROM TRUCK MISPLACED FOOT & FELL OFF STEPS

EMPLOYEE WAS CARRYING GREASE BUCKETS UPSTAIRWAY AND FELT BACK STRESS.

WHILE MIVING PORTABLES EMPLOYEE BUMPED INTO CORNER OF POWER BOX. EMPLOYEE WORKED UNTIL 5/4/92

EMPLOYEE SLIPPED ON WET FLOOR IN MINE CHANGE ROOM DURING SHIFT CHANGE.

ATTEMPTING TO TIGHTEN GUIDE WITH WRENCH IT SLIPPED OFF, INJ TO NOSE

MOVING PLATE WITH HAND CAUGHT BETWEEN ROOF PLATE AND TOP

EE WAS BACKING UP MINER CAUGHT HAND BETWEEN TRAM LIVER AND TOP.

EMPLOYEE WAS OPERATING MINER FRONT JACK FELL INTO HOLE INT EH FLOOR MINER RAISED UP ON RIGHT SID STRIKING OPERATOR INTO TOP.

REMOVING GEAR CHAIN SLIPPED HIT ON HIS RT FOREARM LACER 4 STITCHES

EMPLOYEE WAS CHANGING BITS. BIT BAR SLIPPED OFF THE BIT CAUSING EMPLOYEE TO HIT HIS HAND ON THE FLOOR.

EMPLOYEE WAS WALKING DOWN STAIRWAY BETWEEN PRODUCT SCREENING 6-9, HUNG EIGHT FINGER ON HAND RAIL.

MOVING CABLE WITH ROPE IT BROKE EMP HIT ELBOW ON MINER

EMPLOYEE WENT TO TURN BUCKET ELEVATOR WITH PIPE WRENCH TO CHECK FOR FREEDOM OF MOVEMENT WHILE TURNING SHAFT WITH WRENCH, ELEVATOR BACKLOADED AND PINCHED LEFT HAND BETWEEN WRENCH AND MOTOR MOUN T.

EMPLOYEE WAS GOING TO WELD TYLER MOTORBASE ACCDIENTLY TOUCHED METAL WITH WELDING ROD CAUSING ARC.

EMPLOYEE WAS REMOVING SEAL FROM BEARING BLOCK, ACCIDENTALLY SLIPPED AND MASHED EMPLOYEE'S LEFT INDEX FINGER.

CUTTING BAND AROUND RUBBER BELTING FOR PORTABLES. BAND WAS CUT WITH CLAW HAMMER, RELEASED ENERGY, CAUSING BAND TO STRIKE LEFT ELBOW.

EMPLOYEE WAS STEPPING OVER BELT ROPES & PULLED BACK MUSCLE.

MOVING MINER CABLE WITH HOOK (CABLE HOOK).

STEP JACK SLIPPED FROM EMPLOYEE HAND LANDING ON RT FOOT.

ROUTINE INSPECTION OF TAILPIECE, MISPLACED FOOT ON BUILD UP MATERIAL. TWISTING OF KNEE.

OPERATED EQUIPMENT WAS BUMPED BY SHUTTLE CAR.

EMPLOYEE WAS STEPPING OFF A RAILROAD CAR MISSED A STEP & TWISTED HIS KNEE

EMPLOYEE WAS PULLING MINER CABLE WITH ROPE IN 48 INCH TOP.

EMPLOYEE WAS INSTALLING A CONVEYOR MOTOR ON A MINER, PRESSAR SLIPPED AND JARRED RIGHT HAND. INJURY OCCURED WHILE EMPLOYED UNDER AMAX POTASH CORP) EMPLOYEES INJURY HAS NOW REQUIRED SURGERY

MOVING METAL PLATE SLIPPED OUT OF HAND AND STRUCK TOP OF ROGHT FOOT CAUSING SMALL PUNCTURE WOUND TO TOP.PLATE APPR 1'X1'X 1/8".

WHILE PULLING SLACK IN POWER CABLE TO MINING MACHINE EMPLOYEE FLET DISCOMFORT IN ABDOMINAL AREA.EMPLOYEE HAD HAD PREVIOUS STOMACH SURGERY AND HAD LEFT APPR 8" SCAR.HERNIA OCCURRED ALONGSIDE OF SCAR TISSUE.

EMPL BENDING DOWN TO SHOVEL TAILPIECE OF BELT.LEFT KNEE CAME IN CONTACT WITH TURNBUCKLE CAUSING BRUISING AND SPRAIN TO MUSCLES OF LEFT KNEE.

EMPL REMOVING BUILDUP OF MATERIAL FROM BELT CONVEYOR EXCHANGE.WHEN CONVEYOR STARTED UP PINCHING LEFT FINGER IN CONVEYOR PINCH POINT.EMPL FAILED TO LOCK OUT CONVEYOR BELT BEFORE REMOVING MATERI AL.

CHANGING BIT MINER GOT FOREIGN BODY IN L FOREARM WENT CO DR TETANUS SHOT REACTION TO IT

DOCTOR DIAGNOSED EMPLOYEE HAVING TENOSYNOVITIS OF RIGHT THUMB DUE TO HER CONTINOUS WORK WITH A NAIL GUN.

EE WAS INSTALLING BITS ON MINER AND BIT DISLODGED AND STRUCK EE ON MOUTH.

EMPLOYEE FELL ON GRATING WHILE ON HER WAY TO CHECK A TANK.

EMPLOYEE WAS SHOVELING AND PULLED GROIN MUSCLE.