Buscar en el registro

EMPLOYEE WAS DRIVING A RIPPER CHAIN PIN ON CM03 WITH A HAMMER WHEN A CHIP CAME OFF THE PIN STRIKING THE EMPLOYEE IN THE THIGH. EMPLOYEE WAS SENT TO DOCTOR TO HAVE THE CHIP REMOVED. EMPLOYEE RE TURNED TO WORK WITH FULL RELEASE.

EMPLOYEE WAS STEPPING OVER A VACCUUM PIPE WHEN ANOTHER EMPLOYEE LIFTED THE PIPE AND EMPLOYEE TRIPPED OVER THE PIPE, LANDING ON HIS HANDS AND KNEES. EMPLOYEE WAS SENT TO CASTLE ROCK MEDICAL CEN TER TO BE EXAMINED. X-RAY SHOWED A SMALL HAIRLINE FRACTURE IN HIS RIGHT ELBOW.

WHILE WORKING ON TAILING LINE, EE SLIPPED AND STRUCK HIS LEG AGAINST A METAL SIGN CUTTING HIS UPPER LEFT LEG, WHICH REQUIRED SUTURES. EE RETURNED TO FULL DUTY.

AFTER FINISHING HIS SHIFT, EE WENT HOME. DURING THE NIGHT HIS EYE BEGAN IRRITATING HIM. EE RETURNED TO WORK ON 2-7 AND WAS SENT TO THE CO DR. IT WAS FOUND THE EE HAD A SMALL METALLIC PARTICLE EMBEDDED IN HIS LEFT EYE. THE PARTICLE WAS REMOVD AT THE DR OFFICE AND EE RETURNED TO WORK. IT IS UNKNOWN HOW THE PARTICLE ENTERED HIS EYE.

EMPLOYEE WAS ALIGNING A BOLT WITH RIGHT BOLTER WRENCH. BOLTER OPERATOR DID NOT SEE MINER OPERATOR'S HAND POSITION AND SWUNG THE GRIIPS INTO LINE THE BOLT UP. THE LOWER GRIPPER CLOSED ON HIS RI GHT HAND, MIDDLE FINGER, PINCHING IT.

WHILE PICKING & SHOVELING EE SPRAINED LEFT FOREARM.

A MECHANIC WAS WELDING NEAR THE MAINTENANCE WAGON ON CM04 SECTION WHE METHAN IGNITED FROM A CRACK IN THE FLOOR. DIRT WAS KICKED ON THE FLAME TO EXTINGUISH IT. METHAN READING WAS TAKEN PRIOR TO WELDING AND WAS 0.0%.

AT 7:30 PM ON 4-18-95, MECHANICS WERE BRINGING A CUSHMAN OUT OF THE MINE ON THE SERVICE CAUAGE, WHEN THE WORK DECK STRUCK THE COUNTER WEIGHT. CAUAGE WAS STOPPED AND EQUIPMENT DAMAGE WAS EVALUA TED. ALL EE'S WERE NOTIFIED AND ALTERNATE HOISTING WAS PUT INTO SERVICE.

SLEDGE HAMMER BLOW TO RIGHT KNEE CAP. COWORKER WAS HAMMERING TOOL JOINT LOOSE--MISSED AND HIT EE.

EMPLOYEE WAS RELIEVING OPERATOR ON #16 LOADER WHEN HE TURNED THE WATER VALVE ON FOR THE WASH-DOWN HOSE. THE HOSE WHIPPED BACK, HITTING THE EMPLOYEE ON THE RIGHT SIDE OF HIS FACE.

LEFT LEG WENT THROUGHT SMALL OPENING IN GRATING. INJURY TO LEFT KNEE.

EMPLOYEE WORKING ON DRILL RIG AND LAYING DOWN DRILL PIPE. (NOT ABLE TO USE CATHEADS FOR LAY DOWN DUE TO MSHA REQUIREMENTS TO BUILD COVERS AND NOT USE ON JOB SITE). ONE JOINT OF PIPE STUCK TO F LOOR AND EMPLOYEE WENT TO HELP FLOOR HAND PUSH THE PIPE. THE PIPE FELL BETWEEN THE CAT WALK AND PIPE TUB. IT KICKED TO THE RIGHT AND HIT EMPLOYEE IN THE RIGHT KNEE & KNOCKED HIM TO THE FLOOR.

EMPLOYEE WAS CLOSING HOPPER GATES ON RAIL CARS WHEN SHE STEPPED BACK AND CAUSED INJURY TO HER LEFT KNEE. EMPLOYEE DID NOT SLIP, TRIP OR FALL.

EMPLOYEE WAS TRAVELING TO LBS IN #8 MANTRIP. A X-CUT 181, THERE WAS AN APPARENT MALFUNCTION IN THE STEERING MECHANISM CAUSING THE MANTRIP TO STRIKE THE RIB. EMPLOYEE RECEIVED A CUT UNDER HER C HIN AND BRUISED HER LEFT FOREARM AND RIGHT KNEE.

EMPLOYEE TRIPPED OVER A SMALL BUILDUP OF CRYSTAL AND FELL FORWARD. WHEN SHE TRIED TO CATCH HERSELF, IT RESULTED IN A PULLED MUSCLE IN HER SHOULDER.

INJURED DID NOT REPORT THE INJURY TO US SO I HAVE NO KNOWLEDGE OF HOW IT HAPPENED OR WHAT TIME OF DAY IT HAPPENED.

GRINDING PIPE NOZZLES USING 9 INCH GRINDER, WHEN GRINDING DISC GOT CAUGHT ON PIPE FLANGE. CAUSING EE TO TEMPORARLY LOOSE CONTROL GRINDER SPUN DOWN AGAINST LEFT KNEE. CUT REQUIRING 8 STITCHES.

EMPLOYEE WAS HANGING A LOADER CABLE AT #2 ENTRY LBS #2. EMPLOYEE WAS STANDING GROUND LEVEL LIFTING THE CABLE WITH A CRUTCH. THE HOOK WAS 10.5 FTHIGH WHEN THE CABLE STARTED TO SWAY BACK AND FOR TH. THE EMPLOYEE LET THE CABLE FALL AWAY FROM HIM DISLOCATING HIS SHOULDER.

EMPLOYEE WAS REPLACING DUST BAGS ON A MOBIL VACCUM TRUCK. WHILE ON THE WORK DECK, EMPLOYEE REACHED THROUGH THE TOP HATCH TO PULL THE BAGS. HIS HAND BUMPED THE BRACE THAT WAS HOLDING THE LID OPEN, AND THE LID FELL HITTING HIS LEFT HAND.

EMPLOYEE WAS WASHING THE PAD OF THE 80' THICKENER. HE WENT TO INSPECT THE DAMAGE TO THE DOOR THAT HAD RUPTURED & STEPPED INTO A HIDDEN HOLE THAT WAS BETWEEN THE GRATING & THE THICKENER. THE AR EA WAS FLAGGED OFF & FULL OF HOT LIQUID & MUD.

EMPLOYEE WAS RESPONDING TO AN ACCIDENT AS A FIRST AID LEADER WHEN HE SLIPPED IN HOT MUD AND LIQUID THAT HAD POOLED UP FROM A RUPTURED DOOR ON THE 80' THICKNER.

EMPLOYEE HAD JUST COME FROM THE WAREHOUSE AND STOPPED HIS CUSHMAN BY AN AREA THAT WAS FLAGGED OFF.HE WALKED UP TO LOOK AT A DOOR THAT HAD RUPTURED ON THE 80' THICKNER AND IN DOING SO SLIPPED ON THE GRATING AND FELL INTO THE HOT LIQUID AND MUD HAD COME OUT OF THE TANK.

EMPLOYEE WAS REMOVING CHUNKS OF ORE FROM 5C-45 ONE CHUNK THAT HAD BEEN REMOVED FELL OVER ON ITRS SIDE & LANDED ON THE EMPLOYEES FOOT FRACTURING A BONE (RT FOOT)

AS THE EMPLOYEE WAS CHECKIGN A NEWLY INSTALLED SIGHT GLASS FOR LEAKS, IT RUPTURED AND HE RECEIVED A CUT ON HIS LEFT ARM THAT REQUIRED SUTURES.

EE STRUCK HIMSELF IN THE FACE WITH A SMALL PRYBAR. SMALL CUT ON RIGHT SIDE OF FACE REQUIRING TWO SUTURES.

MINER WAS TRAMMING WHEN THE BOLTER OPERATOR'S DOOR RUBBED AGAINST THE RIB. EE TWISTED HIS BODY AND FELT SOME DISCOMFORT IN HIS BACK.

PUTTING GLASSWARE TOGETHER FOR EMISSIONS TESTING(SES-10 PRECIPITATOR) WHEN GLASSWARE BROKE APARTIN TIM MCCULLOUGH'S HANDS, CUTTING HIS RIGHT HAND.

WHILE UNLOADING A ROLL OF BELT FROM THE SERVICE CAGE A SCOOP PUSHED TO HARD AGAINST BELT OR CAGE CAUSING SIDE LANDING ON CAGE GUIDES-TWISTING/BENDING GUIDE BRACKETS HOIST WAS IMPARED ONLY FOR TIME TO INVESTIGATE DAMATGE GUIDES HAVE BEEN REPAIRED & SERVICE HOIST IS BACK IN OPERATION NO 3 HOIST WAS PREPARED FOR STAND BY IN CASE IT WAS NEEDED REPORTED TO MSHA AT 2:00PM

EE WAS WORKING WITH A CONSTRUCTION CREW ON THE LOWER BED WEST #4 NORTH PANEL IN ROOM 7 EAST WHEN SHE WAS INSTRUCTED TO OPERATE THE SCISSOR TRUCK. UPON LOCATING THE TRUCK SHE SAW THAT THERE WAS INSUFFICIENT AIR IN THE TRUCK TO START IT. LUBETRUCK WAS PARKED NEARBY THE OTHER TRUCK. SHE STARTED THE LUBE TRUCK, AS WAS CARRYING THE AIR HOSE BEHING THE LUBE TRUCK SHE TURNED AND SAW THE

THE NO.1 SERVICE HOIST MOTOR FAILED. DURING THE REPAIR TIME THE SECONDARY MEANS OF EXIT WAS UTILIZED TO HOIST MINERS OUT OF THE MINE. HOIST WAS REPAIRED, INSPECTED, AND PUT BACK INTO SERVICE A T 9:45PM.

CONTINUOUS MINER ON THE LOWER BED NORTH WAS BEING WORKED ON WHEN METHANE GAS WAS IGNITED FROM CUTTING TORCH SPARKS. EMPLOYEE HAD CHECKED FOR GAS WITH AN APPROVED METHANE DETECTOR IN THE IMMEDI ATE AREA INCLUDING THE FLOOR. FLAMES WERE IMMEDIATELY EXTINGUISHED. THE MINER WAS LOCATED OUTBY IN FRESH AIR AT THE TIME.

EMPLOYEE WAS REMOVING SCREEN, STOOD UP FELT PAIN IN BACK. [SEE ATTACHED LETTER]

WHILE REMOVING A CHUNK OF ORE FROM A DISCHARGE GRIZZLY, EE GOT HIS FINGER PINCHED RESULTING IN A CUT TO HIS RIGHT RING FINGER NEEDING STITCHES TO CLOSE.

EMPLOYEE WAS TAKING A STEERING ARM OFF OF SC#30 SHUTTLE CAR USING A 3/4" ALLEN WRENCH AND HAMMER. UPON STRIKING THE ALLEN WRENCH WITH THE HAMMERTO BREAK BOLT LOOSE, THE ALLEN WRENCH CAME OF AL LEN HEAD BOLT AND HIT EMPLOYEE IN THE UPPER LIP.

WHILE REMOVING CLEAN CHEMICAL OXYGEN DEMAND GLASSWARE FROM A DRYING RACK, A PIECE IN HER LEFT HAND BROKE CUTTING HER LEFT WRIST RESULTING IN STITCHES BEING NEEDED.

EMPL WAS WALKING AT THE JOB-SITE LOCATION. EMPL STEPPED ON A ROCK WHICH HE HAD NOT SEEN, TWISTEED RIGHT ANKLE & FELL TO THE GROUND.

EMPLOYEE IN FULL BODY SAFETY HARNESS TIED OFF TO STRUCT STEEL WHILE REPAIRING STEEL WAS IN SKY CLIMBER WHEN CABLE BROKE EMPLOYEE WAS CAUGHT BY HARNESS LANYARD & ROPE GRAB EMPLOYEE SUFFERED MIN OR LACERATIONS TO RT EYE AREA TENDERNESS & SORENESS IN RT ARM & BACK EMPLOYEE BACK TO WORK MISSED ONE DAY

WHILE HELPING PUT A MORRIS PUMP SHIELD UP HE HAD HIS FOOT BREAK THROUGH SOME CRYSTAL THAT HAD BUILT UP ON THE FLOOR GETTING SPLASHED WITH SOME LIQUOR. HE WENT TO THE COMPANY DOCTOR WHERE DOCTO R GAVE ANTIBIOTICS FOR BURN AFTER IT BECAME INFECTED.

EMPLOYEE WAS KNEELING DOWN ON ONE KNEE WORKING ON A CUSHMAN WIRE. WHEN EMPLOYEE STOOD UP HE FELT A PAIN IN HIS LEFT KNEE.

WHILE PUTTING JAG ADDITIVE INTO A THICKENER FEED LINE, THE EMPLOYEE HAD HOT LIQUID SPLASH ONTO THE BACK OF HIS HEAD, NECK, SHOULDERS AND EYES.

EE WAS WALKING TO JOB SITE TRAILER TO REPORT FOR WORK THERE WAS 1/2 INCH OF NEW SNOW ON THE SNOW PACKED ROADWAY CAUSING HIM TO SLIP AND FALL ON HIS LEFT ARM AND SHOULDER.

EE WAS IN THE PROCESS OF CLEANING WORK AREA AND WHILE REACHING BESIDE AND BEHIND HIMSELF TO GET A SHOVEL AND HAD HIS LEFT SHOULER DISLOCATE.

EMPLOYEE WAS USING A 90 POUND JACKHAMMER AND IT HIT HIS LEFT BIG TOE.

WHILE TAPPING A SPACER BAR INTO PLACE ON A SCREEN THE EMPLOYEE STRUCK HIS LEFT INDEX FINGER CAUSING A CHIPPED BONE.

EMPLOYEE WAS CUTTING OFFEND OF 1/2IN HOMP ROPE WITH POCKET KNIFE WHEN ROPE DIDNT CUT THRU AFTER 2 OR 3 SWIPES OF THE KNIFE METHOD OF CUTTING AWAY WAS ABONDONED & ROPE WAS LAID AGAINST SCAFFOLD TO CUT TOWARD IT KNIFE SLIPPED & CUT LEFT INDEXFINGER AT THE KNUCKLE

68935 STEPPING OFF OF A LUBRICATING VEHICLE, THE EMPLOYEE STEPPED ON A ROCK CAUSIGN HIM TO TWIST HIS KNEE. THE KNEE WAS PUT INTO A BRACE BY THE DOCTOR.

68935 MOVING BOLOGNA CABLE EMPLOYEE PLACED HIS LEFT HAND ON BACK OF TRACTOR FORK FRAME WHEN TRACTOR OPERATOR ROLLED THE TRACTOR FORKS BACK THE EMPLOYEES FINGER WAS CAUGHT BETWEEN THE FRAME & A 08849AULIC RAM RESULTING IN A LACERATION NEEDINGSTITCHES

WHILE OPENING THE LID OF A RAILROAD CAR FOR LOADING, SHE HAD A CAR LID STICK WHICH CAUSED HER TO INJURE HER BACK AND RESTRICT HER WITH A LIFTING RESTRICTION.

WHILE TRIGHTENING A BOLT ON A U SHAPED CLAMP THE EE HAD THE WRENCH SLIP AND HIS FORWARD MOMENTUM CAUSED HIM TO STRIKE HIS LIP AGAINST THE SIDE OF THE MACHINERY HE WAS WORKING ON. THIS REQUIRED TWO STITCHES TO CLOSE.

EMPL USING A CONCRETE VITRATOR.THE VIBRATOR HAS A MOTOR THAT CONNECTS TO THE VIBRATOR.EMPL WAS HOLDING MOTOR WHILE ANOTHER EMPL WAS USING THE BIBRATOR.BOTH EMPL WERE SPREADING CONCRETE.EMPL J ERKED VIBRATOR END CAUSING THE MOTOR END TO TWIST. THIS CAUSED INJ EMPL TO TWIST RIGHT ELBOW.