Buscar en el registro

Strained lower right inguinal while lifting screen in screen plant.

Miner was getting down from the loader cab at the end of EE's shift when EE's hand slipped. EE lost EE's footing on the ladder and fell against the loader fender.

When the two employees went to set the screen down onto the platform, one of the employees left hand got caught up on the left top corner of the screen slicing through the glove EE was wearing through EE's left middle finger and EE's left ring finger. The injury resulted in 9 stitches to the left hand.

Cleaning bucket on loader. Hydraulic was leaking causing it to lower slowly. Lowered onto foot causing injury.

While climbing down equipment ladder,L hand missed rung while moving feet to the next rung. Fell backwards approx 6 feet, landing on catwalk.

Stepping off of dozer, twisted ankle. First aid only; then sought medical care on 09/29/2015 and was prescribed ankle brace and crutches.

pulling 250# tail pulley back with come-along, to line up bearing. latch didn't catch & released itself, pulley moved forward pinning L hand between frame & pulley. Caught L middle, ring & little fingers.3 sutures on 3rd finger and 1 suture on 5th finger. Released for restricted, Right-hand duty 5/14/2015.

2 employees in 2006 Cat 735 seat belts fastened. Trainer was training employee on driving haul truck. The trainer w trainee driving 3rd load. Going down a steep road in 4th gear, truck jumped to 7th gear & speed increased w brakes on. Going too fast on curve, flipped onto its side. Both Employees have minor injuries. Investigating root cause of jumping gear.

2 employees in 2006 Cat 735 seat belts fastened. Trainer was training employee on driving haul truck. The trainer w trainee driving 3rd load. Going down a steep road in 4th gear, truck jumped to 7th gear & speed increased w brakes on. Going too fast on curve, flipped onto its side. Both Employees have minor injuries. Investigating root cause of jumping gear.

While getting into cab of semi truck, driver "smacked" top of head on door frame. diagnosis - laceration and concussion without loss of consciousness.

He was in the pit, climbing off his bulldozer. There was a trench that he stepped on and he twisted his L ankle on the uneven surface. Ankle is swollen and doesn't move normally.

WHILE EE WAS CLEANING HOPPER, HAND HIT BOTTOM OF HOPPER AND CUT THE RIGHT LITTLE FINGER REQUIRING A PIN AND STITCHES.

WORKER STANDING ON LADDER WHILE PUTTING RUBBER IN HOPPER. LADDER SLIPPED AND WORKER FELL CATCHING RIGHT ARM BETWEEN FRAME. FAST MOVING BELT CUT FOREARM BEFORE HE COULD MOVE IT.

EE WAS STANDING IN THE SHOP TALKING TO ANOTHER EE WHEN SUPPORT LEG FOR A TRUCK TRAILER THAT WERE LEANING AGAINST SOME OIL BARRELS FELL OVER AND STRUCK THE FIRST EE ON HIS BACK. PARAMEDICS WERE CALLED TO STABLIZE AND TRANSPORT TO HOSPTIAL.

EMPLOYEE WAS CUTTING A PIECE OF BELTING WITH A RAZOR KNIFE & SLIPPED & CUT HIS LEFT HAND THUMB, IT TOOK ONE STITCH.

BLOWING DUST AND ABRASIVE MATERIALS IN SHOP AREA.

DESCENDING STEEP HILLSIDE-TRIPPED & FELL ON LEFT SHOULDER.

DESCENDING STRIP SLOPE TO WORK ON WATER SUPPLY ROCKS LOOSENED CAUSING FALL ON SHOULDER.

GETTING DOWN OFF LADDER-MISSED STEP AND FELL-MAKING CONTACT W/GROUND ON RIGHT SHOULDER-RAINING AT THE TIME-WETNERS COULD HAVE CONTRIBUTED.

LIFTING SHIELD ON CONE- IMPROPER LIFTING.

REPAIRING BELT PULLEY -GAVE SIGNAL TO START PULLEY-PULLEY DID NOT MOVE-MAN ON GROUND DID NOT SEE SIGNAL TO TURN OFF-TRIED TO HAND TURN PULLEY-ELECTRICITY WAS ON-SO PULLEY KICKED OVER CATCHING FINGER IN SAID PULLEY.

DIGGING SAND AWAY GOT STRUCK BY LG ROCK FALLING FROM CONV

HOOKING UP SUPPORT FOR RADAIL STACKER-LINING UP HOLES FOR LOCKING PINS USING A CAT BAR-WHEN CONVEYOR SLIPPED PINNING HIS RIGHT HAND BETWEEN CONVEYOR AND SUPPORT.

INJURED SENT TO CLEAN FEEDER.WHILE SHOVELING DIRT HE STEPPED BACK TO CHANGE POSITION IN DOING SO HE STEPPED ON PIECE OF SCREEN GUARD WHICH CAUSED HIM TO LOOSE BALANCE ON FALL ON BELT BELOW.HE STRUCK HIS LOWER BACK ON BRACE,CASUING BRUISE AND PULLED LIGAMENTS..

WORKER ALONE CLANING EXCES FROM AROUND AND CONVEY. REACHED INT O CLEAN SOMETHING HANGING UNDER CONVEYOR BELT GLOVE CAUGHT PULLING HIS ARM BETWEEN BELT AND THROUGH ROLLER.

SUSPENSION ON SEAT OF LOADER WAS BROKEN AND WOULD BOTTOM OUT DURING OPERATION- CONTINUOUS OPERATION CAUSED BRUISED BACK.

CLEARING ROCK STUCK IN GRIZZLY WITH SLEDGE HAMMER ON SOWN SWING HEAD CAME LOSE FROM SHAFT CAUSING A STRIKING OF HAND ON GRIZZLY.

OPERATOR CLIMBED ONN TIRE TO CHECK OIL. FOOT SLIPED CAUSING FALL. THE FALL RESULTED IN OPERATORS LEFT EBLOW STRIKING GREASE - PUMP, CUASING CHIPPED ELBOW, AND HAIRLINE FRACTURE.

TOOK ROCK OUT O0 CONVEYOR FRAME AND COAT SLEEVE GOT CAUGHT ON ROLLER.

WELDING ON EQUI1MENT AND A CAN CLOSE BY BLEW UP.

WORKING ON WATE9 PUMP AND A VALVE SMASHED HIS FINGER.

TURNED ON PRESS6RE WASHER, HOSE BLEW OFF AND SPRAYED CHEST AND KNEE.

WAS MOVING RAIL9OAD TIES AND CAUGHT HIS FINGER IN BETWEEN THEM.

UNHOOKED PRESSU9E LINE AND STEAM SPRAYED OUT BURNED WRIST.

CHECKING OUT EQ6IP AND ROCK FELL OFF CONVEYOR AND LANDED ON FOOT.