Buscar en el registro

SLIPPED ON ICE & FELL TO HIS LEFT KNEE ON HIS WAY TO CHECK GYP HOPPER FOR FINISH MILL #2 WENT TO DR 1/9/01

WALKING TOWARD ELECRICAL OFFICE WHEN HE LOST TRACTION & FELL IN FRONT OF CONDUIT RACK. FELL ON ICEY PATH

REMOVING 7TH BOTTLE OXYGEN FROM 8TH BOTTLE RACK AT FINISH MILL OTIS ELEVATOR. 8TH BOTTLE WAS NOTSECURE TOPPED OVER & STRUCK AGAINST BOTTLE EE WAS IN PROCESS OF REMOVING SMASHING HIS 2 MID LE FINGERS ON LEFT HAND

EE WAS REBAGING THE HIGH BANK SMALL DUST COLLECTOR PULLING OUT BAG CAGES WHEN HE FELT A PULL/STRAIN IN HIS RIGHT WRIST

WHILE GUIDING KILN HOOD PLATFORM BEAMS INTO THEIR POCKETS, FELT SOMETHING SNAP IN HIS LOWER BACK. PAIN NOT TOO BAD FOR THE REST OF THE SHIFT. NEXT MORNING HE COULD BARELY MOVE.

KILN 2 DRIVE PIER DOOR JAMMED. PUSHED DOOR TOO CLOSE AND FINGER CAUGHT BETWEEN DOOR AND FRAME.

SUCKING OUT BAGHOUSE #2, HOPPER #3, BRIDGED OVER MATERIAL DUMPED & LEFT LOOSE CAUSING HOT KILN FEED TO COME IN CONTACT WITH LEFT WRIST. HE HAD 1ST & 2ND DEGREE BURNS.

CARRIED VIBRATOR UP THE STAIRS TO BAGHOUSE 2 AND PLACED IT ON THE BEAM BY HOPPER 2. RELOCATE HIMSELF TO THE OTHER SIDE OF THE OPENING AND LIFTED IT OFF THE BEAM. FELT A "POP" IN HIS BACK.

EMPLOYEE WAS REMOVING A 3" PISTON CYLINDER. PULLING THE CYLINDER OFF BY HAND, HE WAS TWISTING & PULLING ON THE CYLINDER. WHEN THE CYLINDER WAS AT THE END OF THE PISTON, THE CYLINDER JUMPED F REE AND HIT EMPLOYEE ON THE LIP; HE HAD SUTURE REMOVAL ONE WEEK LATER.

3 EMPLOYEES WERE PULLNG FM#3 FK PUMP SCREW. ONE EE WAS USING A 5' PRY BAR TO MOVE THE SCREW FORWARD AND INJURED EE WAS HOLDING THE LOCKING COLLAR. THE LOCKING COLLAR BIT FAST TO THE PUMP SCREW SHAFT AND MOVED WITH THE SCREW PINCHING FINGER BETWEEN THE LOCKING COLLAR ADN SCRWE BEARING HOUSING.

EMPLOYEE WAS WORKING IN #1 KILN I.D. FAN PREPARING THE FAN FOR BUILDUP WELDING. AT THE END OF THE DAY WHEN HE WAS SHOWERING/WASHING DIRT FROM HIS FACE HE RUBBED DIRT INTO HIS LEFT EYE.

EE TRIED USING BAR TO REMOVE A MANHOLE COVER AND DISLODGED IT BUT COULD NOT MOVE IT. PROCEEDED TO LIFT, PULL AND SLIDE COVER BY HAND USING HANDLES ON IT.

EE WAS WORKING WITH A CREW MOVING A LARGE HEAVY ELECTRICAL CABLE. NOTICED DISCOMFORT IN THE LEFT SHOULDER AT THE TIME DUE TO EXERTION.

EE WAS WORKING ON COAL MILL REBUILD. TRYING TO TAKE TOP OFF. WAS LIFTING BLOCKING STEEL 125 LBS AND HE FELT BACK STARTING TO HURT.

FEBRUARY MRI REVEALED HERNIATED DISK. EE CLAIMS DAMAGE DUE TO WORKING AT ALLENTOWN CEMENT OVER EXTENDED PERIOD OF TIME.

WORKING ON FINISH MILL #1 ELEVATOR TO ELEVATOR AIRSLIDE TO RECANVAS THE AIRSLIDE. CUTTING THE CANVAS TYPE FABRIC WITH A UTILITY KNIFE, THE KNIFE WENT THRU THE MATERIAL & SLICED HIM IN THE THIG H AREA OF RIGHT LEG. SUTURE REMOVAL TO FOLLOW WITH DOC APPT.

WHILE INSTALLING "BLUE ARM" IN THE NOSE OF #1 KILN REFRACTORY & COATING BROKE FREE DIRECTLY ABOVE THE AREA EE WAS REPAIRING STRIKING HIM ON THE RIGHT SHOULDER & RIGHT FOOT

MAN WAS WORKING IN THE CRANE MAN BASKET CHANGINGMILL LINER BOLTS ON FINISH MILL 3, 30' HIGH ABOVE THE MILL ROOM FLOOR. WENT TO MOVE TOWARD THE MILL WHEN THE CRANE KEPT MOVING AND WOULD NOT STOP. TRIED TO STOP CRANE BUT HAND PINCHED BETWEEN MILL SHELL AND CRANE BASKET.

EMPLOYEE WAS LIFTING 8 GUAGE ONTO SHOULDER TO FIT PINS INTO TRIPOD. HE FELT LOWER BACK PAIN THE NEXT DAY. TWO WEEKS PRIOR HE WAS MOVING FULL 55 GALLON DRUM AND BELIEVES HE INITIALLY SPRAINED H IS BACK AT THAT TIME.

DESCENDING LADDER AT IRON ORE FEEDER WITH AIR BLOWER. PAIN AND DISFUNCTION IN ARM AND WRIST. DAMAGED ARM WAS THE ARM AND HAND HOLDING ONTO THE LADDER. PLATFORM IS 7 FT HIGH. UNABLE TO MOVE FIN GERS OF RT HAND.

TRYING TO FREE A STUCK IDLER BY HITTING ON IT WITH HIS ADJUSTABLE WRENCH, HE MISSED AND HIS ARM WENT BETWEEN THE BELT AND THE IDLER AND GOT CAUGTH IN BETWEEN.

ATTEMPTING TO SET UP LADDER TO SERVICE LIGHT ON RAW MILL SEPARATOR FLOOR OVER RAW MILL 3 SEPARATORS. LADDER CONTACTED DUST COLLECTOR PIPE AND WENT OVER CENTER STARTING TO FALL. EE WAS FOOTING LADDER AT THE TIME WHILE ANOTHER EE WAS RAISING THE LADDER. EE TRIED TO STOP LATTER AND PULLED RIGHT SHOULDER.

EE WAS CLEANING PAYLOADER WHEN HE HIT HIS RIGHT KNEE ON RAILING OF THE PAYLOADER. HAD SOME SWELLING ON KNEE. SWELLING GOT WORSE AND HE WENT TO THE DOCTOR 6/28/99.

OPENING A NEW 55 GAL DRUM OF MOBILE OIL, WHEN PULLING UP ON METAL TAB HAND SLIPPED OFF & RIGHT MIDDLE FINGER CAUGHT ON SHARP EDGE

PULLING HOSE FAST VAC 6" HOSE OUT OF ELEVATOR PIT, FELT PAIN IN LOWER BACK.

EE WAS REPLACING THE WORN OUT LACERS ON THE PRIMARY BELT. WHILE CUTTING THE OLD LACERS OUT WITH AN AIR CUT OFF GRINDER, IT SLIPPED AND CUT THE INDEX FINGER ON HIS LEFT HAND.

WHILE EE WAS STANDING A TOW MOTR SIDE SWIPED EE'S RIGHT FOOT.

EMPLOYEE WAS WORKING IN #1 COOLER CRAWLING AROUND, MOVING GRATES AND CRAWLING IN THE DRAGLINE. AFTER SEVERAL DAYS EMPLOYEE NOTICED SWELLING AND SORENESS IN IS RIGHT KNEE. HE WORE KNEE PADS TO FINISH HIS JOB IN THE WINTER COOLER WEATHER. HISKNEE WAS STILL SORE ON 03/25/99 HE WENT TO THE PLANT MEDICAL CLINIC. HAD KNEE AMBULATORY ON 08/18/99 AND IS ON SEDENTARY WORK DUTY.

WALKING TO CENTRAL CONTROL BLDG. FROM THE WASHHOUSE, SLIPPED ON ICE OUTSIDE THE COOLER BASEMENT LANDED ON HIS RIGHT HAND.

WALKING BETWEEN OTIS ELEVATOR AND FINISH MILL DP BLDG., HE SLIPPED ON COVERED CLINKER AND FELL LANDING ON HIS LEFT HAND JAMMING HIS THUMB.

TRYING TO REMOVE A NOSE CASTING FROM 1 GRIZZLY, HE LOST HIS FOOTING ON CLINKER AND BREAKER STARTED ROLLING. WEIGHT OF THE LOAD SHIFTED WHILE HE WAS PUSHING ON THE CASTING, STRAINING HIS LOWER BACK.

PAIN IN LOWER BACK WOULD COME AND GO, BUT EMPLOYEE WORKED OVERTIME ALL WEEKEND DRIVING THE SWEEPER & HITTING BUMPS WHILE DRIVING IRRITATED HIS BACK MAKING IT WORSE. PAIN WAS IN LOWER BACK, LEF T SIDE.

LIFTING A 300 LB. OF MATERIAL IN BUCKET W/CHAIN YALE HOIST. CHAIN BECAME HUNG UP ON PULLEY HOOK. HE NOTICED SLACK SIDE OF CHAIN IN BUCKET & WENT TO PULL CHAIN UP OUT OF BUCKET. HAND WAS ON SLA CK CHAIN, CHAIN RAN THROUGH PULLEY, BLANACING LOAD & SLAPPING SLACK CHAIN TIGHT AGAINST LOAD BEARING SIDE OF CHAIN AND STRUCK HAND.

MOVING A 2" X 12" PLANK IN THE KILN TO PLACE IT A DIFFERENT LOCATION. EE STEPPED BACK OFF THE BOARD AND STEPPED WITH HIS LEFT FOOT INTO HOT KILN FEED. FEED WAS AT LEAST 12" DEEP.

EE WAS ON THE STEP PLATFORM AT THE NORTH WEST END OF THE PALLETIZER. AS HE TURNED TO STEP DOWN, HE HIT HIS KNEE ON THE CORNER OF THE ORIENTOR TABLE FRAME. TWO SUTURES IN KNEE.

DOWN STEPS TO RAW MILL PUMP PIT. STEPPED ON THE TRANSPORT LINE FOR RAW MILL #3 F.K. PUMP TO GET OVER TO CIRCULAR 1 F.K. PUMP. HE SLIPPED OFF AND FELL ABOUT 2; JAMMING HIS LEFT LEG.

AFTER LOADING A TRUCK AT SCALE 3, HE WALKED OUT THE PLATFORM TO SAMPLE THE LOAD. WHEN HE STEPPED ONTO THE TANKER (WHICH WAS VERY WET) HE SLIPPED AND FELL, STRIKING HIS KNEE ON THE TOP OF THE T ANKER.

WAS STANDING, LIFTED LEFT LEG ONTO BENCH IN LOCKER ROOM, BENT OVER TO TIE LACE & FELT SHARP PAIN IN LOWER BACK.

EMPLOYEE WAS CLEANING IN THE OIL STORAGE TRAILER WHEN HE WALKED BY DRIP PANS THAT WERE STACKED 4 HIGH. THE PAN HAD SHARP EDGES AND STRUCK THE EMPLOYEE'S LEFT ELBOW CUTTING IT.

WORKING A PALLETIZER AND A RIPPED BAG BECAM STUCK IN THE ROLLERS. WHILE ATTEMPTING TO REMOVE BAGEMPLOYEE FELT/HEARD SOMETHING POP IN LEFT WRIST. CEMENT BAG 94 LBS.

USING AIR CHISEL, INSIDE AIRSLIDE AT SILO 29 TO REMOVE HARD BUILD UP AT TURN ON THE AIRSLIDE. INORDER TO REMOVE LOOSE LUMPS, HE REACHED INSIDE THE AIRSLIDE AND CUT HIS RIGHT INDEX FINGER ON A SHARP PIECE OF METAL ON THE INSIDE OF THE AIRSLIDE.

USING A JACKHAMMER AT THE DISCHARGE CHUTE, JACKHAMMER GOT STUCK. EMPLOYEE PULLED BACK ON JACKHAMMER AND HIT HIS RIGHT ELBOW ON THE KICK PLATE OF THE WALKWAY BETWEEN CLINKER BELTS. WENT TO DR. 4-3-98 - LIGHT DUTY 4-6-98.

CLEANING UP FROM THE CLINKER PENTHOUSE JOB. HE WAS PUSHING OFF RAILROAD TIES FROM THE FORKLIFT WHEN HE FELT PAIN IN LEFT SHOULDER.

GOING TO KILN 1 TIRE VALVE WHEN STEPPING OFF THE MAIN CATWALK TO GO UP THE STEPS THERE IS ABOUT A 4" DROP. WHEN FOOT HIT THE LANDING EMPLOYEE TWISTED BACK.

EMPLOYEE WAS HOLDING DRIVE PIN WITH HANDLE WHILE ANOTHER EMPLOYEE WAS HITTING PIN. SLEDGE MISSED PIN AND HIT EE ON LEFT HAND ON THUMB CAUSING SWELLING AND BRUISING.

CLEANING ANALYZER TUBES FOR KILN ! & @. ANOTHER EE WAS HELPING TO CONTROL THE AIR. KILN 1-NO PROBLEM. KILN 2- PULLED ANALYZER OUT AND NOTICED THAT IT WAS HOT AND TUBE WAS PLUGGED. PUT THE AIR LANCE INTO THE KILN 2 TUBES AND HAD AIR TURNED ON. THE PLUGG BLEW BACK ONTO HIM BURNING RIGHT WRIST. EE HAD NO GLOVES ON AT THE TIME.

PUTTING WHEELS BACK ON THE IGT RING, WHEEL FLIPPED OVER AND PINCHED HAND BETWEEN THE SCISSOR BASE AND THE WHEELS.

CEALNING BRUSHES ON IGT RINGS. PULLED DOWN ON THE BRUSH AND THE WHEELS FLIPPED OVER AND STRUCK HIM.

SETTING SK VALVUES ON LINE 2 TO THE FINISH MILL BELT. THE GRATING CAME LOOSE AND HIS FOOT SLIPPED THROUGH. THE GRATING CAME LOOSE DUE TO FLAT IRON NOT BOLTED TO SECURE PLATFORM.

EE AND ANOTHER EE WERE SLIDING A ROLL OF WIRE APPROX. 600 TO 700 LBS. TO PUT IT ON THE FORKS OF THE FORKLIFT AT THE WASH HOUSE. HE FELT A PULL IN HIS WRIST. LATER ON THE DAYHIS WRIST STARTED T O SWELL AND PAIN BECAME MORE INTENSE.