Buscar en el registro

EE has a bone spur in shoulder, EE pulled on the door of the loader aggravating the left shoulder to the point where EE needed to receive medical attention. I spoke with an MSHA employee in Denver, who said even though the employee has a previous condition, this should still be reported. The employee is awaiting an MRI to see what needs to be done to alleviate the pain

While changing out a barring on the wash plant a guard fell on the employee's right foot, causing a broken toe.

left shoulder separation occurred to the employee while EE was driving in an off road truck. EE ran through a rut while EE had EE's arm over EE's head hanging on to a handle.

This injury was reported to the injury Hotline first by mistake. The injured worker was cleaning out organic debris out of the gravel rock pile, that is formed via a conveyor belt. The worker claims was hit in the head with some of the rocks. EE then claims after the shift EE went to the ER where EE was diagnosed with a slight concussion.

Employee was using a small hand grinder to remove hinges on a roll up door on an enclosed trailer. The grinder became wedged and then kicked back on the employee, cutting their forehead. Employee was wearing gloves and safety glasses at the time of the accident.

Employee was splitting a piece of pipe in two with a torch when the tip of employee's gloved finger got caught between the two pieces, pinching the end of the finger off.

Employee was installing screen on the setup and as EE was reaching down to grab the screen, EE slipped causing hand to be cut by the screen.

Approx 12/31/15 EE was assisting working on material washer, he slipped and fell against the guardrail. This incident was not reported to anyone; he went to his family Dr. On 1/11/16 he went to get on track hoe when he experienced pain on his right side. On 1/13/16 he returned to family doctor and then reported it to HR dept. The safety coordinator was not informed until 1/19/16.

Injured employee was assisting another employee who was on a ladder welding; employee went to hand injured employee the welding lead and injured employee grabbed the wrong end, at which point it shocked him and he fell from the ladder, hurting his ankle

EMPLOYEE WAS MOVING THE SIDE LINES ON THE FUEL BARGE. HIS LEFT FOOT SLIPPED AND HE LANDED ON HISRIGHT KNEE.

EE WAS HOLDING A BLOCK OF WOOD FOR AN EXTENSION TO PUSH. THE BLOCK SLIPPED AND THE TRACKHOE BUCKET PRESSED AGAINST HIS HEAD. THIS PUT HIS HEAD IN BETWEEN THE TRACKHOE BUCKET AND A METAL FRAME ON THE SETUP HE WAS WORKING ON.

EE WAS TIGHTENING A BOLT ON A PIECE OF METAL SCREEN, WRENCH SLIPPED AND EE'S RT THUMB WAS CUT ON METAL SHEET AT BOTTOM OF METAL SCREEN.

THE EE SAID HE WAS INJURED FROM BEING JERKED AROUND ON THE ROADER, WHICH IS UNAVOIDABLE IN THIS TYPE OF WORK.

EE WAS CLIMBING OFF OF DOZER USING 3 POINT SYSTEM. FOOT SLIPPED BETWEEN THE ARM AND TRACK OF ALONGER. CAUSING EE TO INJURED NECK AND RIGHT SHOULDER.

EE AND A MECHANINC WERE UNPLUGGING A FUEL LINE ON LOADER WITH AIR PRESSURE MARK REMOVED HANDS FROM PRESSURIZED TANK AND AIR PRESSURE BLEW DIESEL FUEL IN HIS FACE

ATTEMPTING TO LOWER A 15 FT. PIECE OF 1 1/4" PIPE FROM 8 FOOT IN THE AIR. THE PIPE FELL AND TRAPPED RIGHT HAND BETWEEN PIPE AND A PIECE OF LUMBER.

EE WAS DRILLING THROUGH METAL, THE DRILL BIT HUNG UP AND SPUN THE DRILL AROUND WHICH MADE THE DRILL HIT AND CUT THE EE'S LIP. HE HAD "5" STITCHES PUT IN HIS LIP.

EE SHOVED A PIPE WITH HIS FOOT & HYPEREXTENED HIS LEG. TWISTING A MUSCLE IN HIS KIDNEY AREA.

EMP WAS WORKING ON GRAVEL BARGE FRAME. FRAME BROKE THE WAS HOLDING COME A LONG. COME A LONG FELLAND HIT HIM AND INJURED THE FRONT OF HIS HEAD.

EMPLOYEE WAS TIGHTENING A BOLT ON SCRUBBER SCREEN, BELT BROKE AND HE FELL BACKWARDS INJURING HIS RIGHT SIDE RIB CAGE.

EMPLOYEE BENT OVER TO PICK UP A HEAVY PART TO REPAIR A DOZER AND INJURED HIS BACK.

INJURED WAS LIFTING A PIECE OF SAND SCREEN BY HIMSELF AND INJURED HIS BACK.

EE WAS STEPPING ONTO TRAC HOE, HIS FOOT SLIPPED AND HE FELL. HIS RIGHT LEG HIT PART OF THE TRAC HOE AND BRUSED HIS LEG.

EE WATCHED WELDING IN PROGRESS AS HE WAS MOVING EQUIPMENT PARTS FROM THE WELDING AREA.

WAS RAKING SCREENS ON SET UP AND WHEN HE STARTED DOWN HE MISSED THE STEP AND FELL ABOUT 8 FEET TO THE GROUND.

WAS CLIMBING INTO SAND TROUGH USING HAMMER, PULLING OUT NAILS, WAS TAKING DOWN SAND TROUGH WHILE STANDING IN IT. WHEN HE PULLED THE NAILS OUT OF THE BOARD HE WAS STANDING ON FELL, CAUSING HIM TO FALL ABOUT 4 OR 5 FEET, HE WAS TOLD NOT TO DO THIS BUT DID IT ANYWAY, CAUSING HIS INJURY.

FELL ON PIECE OF METAL.

WAS MOVING A 55 GALLON DRUM OF HYDRAULIC OIL AND WHEN THE DRUM STARTED TO FALL, I WAS HOLDING THE OTHER END AND I GOT THE FULL WEIGHT OF THE DRUM.

WHILE WORKING ON FRONT END LOADER IN AN AWKWARD POSITION STRAINED RIGHT SHOULDER.

A HAMMER HIT ME IN THE KNEE WHILE WORKING ON A PIECE OF EQUIPMENT- TD15C DOZER.

ATTEMPTED TO CLIMB DOWN OFF OF DOZER MISSED STEP & SLIPPED FALLING TO GROUND CAUSING PAIN IN RT SIDE OF BACK ACCIDENT OCCURED 03-05-91 REPORTED 03-06-91 WENT TO DOC 03-07-91 DOC ORDERED TO TAK E OFF WORK THROUGH 03-14-91 AT LEAST