Buscar en el registro

Employees finger was pinched in a safety gate causing laceration.

While performing drilling operations, drill pipe fell and struck the operators right hand causing injury to the right thumb which required surgery.

After unloading, EE drove to the cleanout to ensure the tubs were empty. Using a sledgehammer to tap the side and vibrate the remaining contents, it rotated in EE's hand, catching EE's glove, twisting EE's left thumb. EE was fitted with a splint to immobilize the thumb, was referred for a follow-up appt. w/ ortho and released to work w/o restrictions.

While prying bar slipped and chipped tooth

Pulley bearing failed and caught fire leading to drive tower/belt #1 fire.

Until the fire investigation is complete, we are unable to determine the cause of the fire to the truck.

Fueler lost grip of hose while retracting, allowing end of hose to strike their face.

An employee was in the process of re-inserting HQ split tube into a core tube. During the task, the split encountered ice inside of the tube and the employees hand slipped while applying pressure to the split tube. the sharp edge of the frozen split tube sliced through the employee's glove, resulting in a laceration to the employees left thumb.

While a Hitachi EX 5600 hydraulic shovel was digging in a shot pattern it is suspected it contacted an undetonated booster.

Driver statement: The tarp was in a bind, driver climbed up on the front of the trailer to help work the tarp over whatever it was hung up on. Where the tarp pole connected to the motor, it broke loose, and struck my finger.

Grinder slipped while in use, causing laceration to leg.

Employee was cutting sheathing from wires when tool slipped and cut EE's hand through EE's gloves.

While IP was lifting drill rod to string, the rod slipped. IP reached down to grab rod and placed finger under pin end of rod pinching between box end and pin end of rod.

Removing GET from lip of bucket. Was using a pry bar and soft face hammer to work the old tooth off with the crane attached. The tooth was moving and I was using the hammer to walk the adapter forward. When hitting the adapter a piece of the corner of the adapter splintered off and hit my left inner thigh.

Placing wheel chocks into pickup truck, swinging a bit too much and feeling pain in lower back.

EE was changing liners and EE's harness caught on something, knocking EE off balance, EE slid down and EE's foot hit a ledge breaking EE's heal bone.

Operator placed thumb in pinch point while attempting to move forks on telehandler .

Maintenance door swung closed and hit mechanic in the face.

Mill operator fell causing lacerations.

While using a handheld cutting wheel, the Technician lost grip and the cutting wheel struck their hand causing laceration to their right hand.

While dismounting the grader, the operator lost grip and fell.

While working in a squatted position on an engine at ground level, Mechanic lost balance landing on a pipe.

Miner was attempting to lift a nitrogen cylinder into the back of a service truck, when the cylinder slipped and pinched the miner's fifth finger between the cylinder and the edge of the service truck work bench.

Employee was walking back to work area after lunch. While crossing the roadway they slipped on the ice and broke their tibia.

Loader Operator had large rock fall from digface in to the bucket of the loader causing the Loader to Jolt. The Operator made contact with part of the cab causing injury to the top and back part of head

Mechanic received a laceration while removing a bolt.

While cutting rubber, the box cutter slipped and cut employee's forearm. Resulting in stitches

While attempting to enter the cab of 460E the operator inadvertently stepped backward off the deck of the truck and fell to the ground landing on their right side.

When removing a shackle from a tote lifter, the lifter shifted pinching the employees finger.

While attaching wear iron to a dozer blade a piece slipped pinching mechanic's finger

While placing traffic cones for delineation employee slipped and fell causing the cones to strike their hand.

While attempting to unplug a feeder, the jackhammer being used broke through material causing the jackhammer to drop and pinch employee's finger.

While stowing an A frame ladder mechanic pinched finger

While using hand tool, tool contacted face shield causing laceration to mechanic face.

While replacing a chain link on the drill head crew was using a chain come-along to pull the slack out of the chain to install new link when the come-along slipped from its anchor point coming in contact with then assistants knee causing a cut.

Employee was moving the core tube from the drill rods to the table. As they approached the table, the core tube released unexpectedly dropping onto their hand on the table. Equipment malfunction contributed to the core tube releasing. Employee left site to seek medical attention, and was promptly released after examination.

Mechanic pinched finger between tool and car body of machine EE was working on while torqueing down bolts.

While attempting to move a barrel to a pallet in the back of a light duty truck the employees hands slipped cause employee to fall.

While attempting to remove a filter, the socket slipped causing employees hand to be pinched.

while employee was walking to their vehicle after shift the employee had a slip and fall in the employee parking lot.

Employee was testing a limit function on a drill and got EE's leg pinned between the rod support and drill steel. Employees knee became swollen. EE was seen by urgent care and discharged with instructions to rest it and ice it for 3 days.

Grader caught fire while grading drill pad. Source of the fire is under investigation pending results from fire inspector

Operator had a fall of the same level after stepping on a rock walking to equipment

While attempting to place a bearing onto a shaft using a hydraulic press the shaft slipped causing it to make contact with the guard. The guard then struck the employee.

Operator was lifting a cover to close a ball valve, when the lid slipped out of their hand causing the lid to pinch index finger.

While attempting to remove a rock from the push arm of a rubber tire dozer the operator felt a strain in right arm.

Mechanic removed new ripper tip from rack and went to place the ripper tip in the service truck when mechanics finger was pinched between the ripper tip and tailgate.

Case began as a first-aid only case on 05/25 and was modified to reportable injury on 07/07. Laborer using a vice grip clamp attached to the liner to help guide the liner. The employee tugged on the liner and the clamp came loose. The employee lost their footing and fell backward on the slope. The employee braced themselves with their right hand and received a strain to the wrist.

While attempting to make a lift a picking eye broke causing the lifting chain to strike employees arm

Our permitted landfill built on an old waste rock dump had an unplanned fire occur. The source of the fire is unknown. No damage was caused by the fire and no personnel or equipment were exposed.