Employee was operating a drill and felt severe pain in EE's back on the left side. Did not do anything out of the ordinary no heavy lifting no pulling did EE's pre-shift and started drilling. Was on a slight incline with the drill. No real reason concrete contributing factor.
En todo el registro
- Incidentes totales
- 740,516
- De los cuales mortales
- 3,120
- Años en el registro
- 1983–2026
- Clasificaciones
- 20
Notifícame sobre esta búsqueda
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
41 registros en total
Mostrando los 41Strained / Sprained right knee, employee was stepping down out of the fuel truck holding the railing and door handle. EE's tread on EE's boot stuck in the step grating and didn't slide off. EE's left foot was fully planted on the ground and as EE was turning anticipating EE's right foot was coming down as well felt knee pull.
Employee hurt (sprained / strained) EE's back dragging a wash out hose thru the plant doing normal work activities.
Employee was turning on a nozzle of a 1 1/2" Water Hose and felt something pop in their right elbow causing discomfort.
Employee was exiting CAT 330 hammer. As EE was stepping out onto step, EE's foot slipped off the step while maintaining a hold on the left handrail, and pulled a muscle in EE's left shoulder. Steps and walkways were clear of debris/mud.
Employee was assisting fabricator on the outside while fabricator welded inside and outside of the box. EE returned home that afternoon and took a nap. After waking, EE encountered symptoms of flash burn and went to ER. There, EE received medication for pain management and was released to regular duty the following Monday. Supervisor was notified on 3/6 at 10:00 AM following day.
Employee was walking on uneven ground and tripped over a slight change in elevation falling forward and fell on their right shoulder
Employees was holding the nut / bolt on the bottom end with a wrench so that it would turn in the frame so it could be tightened from the top with another employee with a ratchet and socket. EE was overpowered and lost grip of the wrench, it fell off the bolt and EE's hand and wrench went forward and ran across the metal sheet cutting the tip of right pinky finger
Employee was taking a box of used air filters/oil filters weight approximately 40 pounds off the side of EE's truck and was turning to throw in the dumpster when as EE turned stepped on some uneven ground causing EE's right foot / ankle to roll losing EE's balance falling to the ground and with the entire weight of EE's body and the box caused EE's right ankle to dislocate.
Truck Driver pulls material from the bins at crusher climbed up on the side of the truck to look in the back of to make certain bed was clear of snow ice etc and slipped catching self with left arm and felt something pull and had minor pain. Report Only. Our policy is to report all incident and accidents.
Employee felt tension in lower back while operating dozer mid-morning. Later in the afternoon was hooking up a clevis and felt more pain in lower back. Employee waited a day pain got worse went to physician. Doctor indicated back spasm, prescribed meds released back to normal job duty no restrictions. No time lost.
EE was found unconscious at approx. 10:00 am. Quarry foreman was notified, went to scene & called 911 & Asst GM. EE regained consciousness by time paramedics arrived. Due to his medical history, was life-flighted to Ruby Memorial for further review. It was determined he suffered a seizure, causing his unconsciousness.
EE was hauling crushed aggregate to stock piles. ee contacted supervisor at 10:33am complaining of fumes in the truck he was driving. Supervisor instructed him to take truck to shop. ee delivered truck to shop and said he didn't feel well, then fainted. EE was conscious within a few seconds and transported to hospital by emergency crew.
EE was changing a fuel filter. He squatted down to remove the filter. When he stood back up, he felt his left knee pop. He had an MRI done on 7/14/11 to determine extent of damage. Based on results of MRI, he had an outpatient procedure to fix torn tissue/muscle on 8/31/11. Returned to light duty.
Rock bridged in chute from 6x20 to Belt #3. Must clear from chute on bottom side. When rock let loose, EE was unable to get his hand out before rock smashed fingers.
Employee stepped down out of fuel truck onto a rock twisting his right ankle / foot. Note: employee was not put in a walking boot until 5/4/11 due to x-ray was unable to be read by the Dr due to swelling.
Employee caught left index finger and glove on drill bit. Before drill was shut off it twisted his glove and hand around the bit and amputated his index finger at mid-knuckle.
Employee was moving an oil drain barrel from under dozer ripper. Drained transmission.
Employee reported while driving out of Pit 5B he hit a bump in the road and felt pain up the back of his spine.
June 7, 2010 EE manually lifted an anvil out of the 103 crusher. Boom Truck was available to lift it out but employee did not wait. EE as he lifted the anvil felt pain in the lower back. June 9, 2010 EE told us he needed to go see a doctor that the pain wasn't going away. MRI Completed 6/23/10 release to full work duty 6/24/10
Dismounting hoe & stepped onto stumped mound of dirt. Slipped off stump & his left leg caught between stumped dirt mound & hoe track. Taken to ER. MRI showed nothing but was to have physical therapy & light duty till cleared by Dr. Returned to work under company's Back to Work Program on 7/17/07 for light duty at scalehouse.
Employee was mounting skid steer and caught his arm on a broken light. His arm caught on a piece of broken glass protruding from the lens on the broken light.
Cut finger on burr from crusher screen while lifting it onto the skid steer
HAD CHAIN HOIST ON BACK OF CRUSHER BELT LIFTING GUARD UP. HOIST WOULD NOT RELEASE SO EE WAS PULLING HARD ON IT. WHEN IT FINALLY LET LOOSE, FELL BACKWARD, HARD HAT FLEW OFF AND CHAIN HOIST CAME DOWN AND HIT EE ON TOP OF HEAD.
HIT SOFT SPOT (HOLE) IN PIT, THROWN ABOUT CAB, TWISTED BACK. DRIVER WAS WEARING SEAT BELT.
ON 4/7/98 EE TOLD HIS SUPERVISOR THAT HIS BACK WAS BOTHERING HIM, BUT HE DIDNT' KNOW WHY. HE DROVE HIS SON TO NASHVILLE TENN ON 4/4/98 AND RETD4/5/98. HE THOUGHT THE DRIVE CAUSED HIS BACK PRO BLEM. HE TOOK 4/6/98 OFF, THEN CAME BACK TO WORKON 4/7/98 HE WENT TO THE CHIROPRACTOR ON 4/8/98 WHO TOLD HIM THAT HE WOULD EVALUATE HIS BACK AFRER MRI ON 4/15/98. EE TOLD DR THAT ON 4/1/98 HE
THIS EMPLOYEE WAS HELPING TO LOAD A SHOT AT OUR ELKINS QUARRY OPERATION. AT 12:30 PM HE TOLD HIS SUPERVISOR HE HURT HIS BACK. THE SUPERVISOR ASKED HIM HOW IT HAPPENED AND EMPLOYEE SAID HE DID' NT KNOW, IT JUST STARTED HURTING.
EE WAS KNOCKED DOWN BACKWARDS BY A BLAST OF AIR FROM THE AIR SEPARATOR AT THE CRUSHER. AT THE TIME, HE REPORTED TO SUPERVISOR. OVER THE WEEKEND HIS BACK GAVE HIM TROUBLE, SO HE WENT TO THE DR. ON MONDAY.
HE WAS OPERATING A D8 DOZER ON WASTE PIT. WHEN THE DOZER WAS AT THE EDGE OF THE FILL, THE DIRT GAVE WAY. BEFORE HE COULD GET THE DOZER IN REVERSE, THE DOZER WENT OVER THE EDGE OF THE FILL APPR OX. 40 FEET AND HIT THE HIGHWALL.
GRABBED STEERING WHEEL IN TRUCK TO PULL HIMSELF UP AND HURT BACK.
WAS TOLD NOT TO LIFT HEAVY LOADS/GET HELP.
66929NG ON ENGINE OF COMPRESSOR .STARTED UP COMPRESSOR AND RUST FROM EXHAUST SYSTEM FLEW INTO LEFT EYE.
LIFTING THE TOP OFF OF AN OIL SLUMP TANK.
GETTING READY TO FUEL UP A PIECE OF EQUIPMENT STEPPED OUT OF FUEL TRUCK & TWISTED ANKLE
FOREMAN STARTED DOZER, RUST FROM EXHAUST BLEW IN HIS FACE.
RESPIRATOR STRAP PULLED LOOSE FORM MASHK FLIPED METAL END OF STRAP IN LEFT EYE
EMPL HAD HAND ON PIECE OF EQUIP WHEN HAND WAS HIT BY SLEDGE HAMMER.
EMPLOYEE WAS TAKING THE FLOOR OUT OF A CAT TRUCK, AND A SHEET OF METAL WEIGHING 400 LBS. FLEW UP AND HIT HIM ON THE RIGHT FOOT.
STONE CAUGHT IN JAW CRUSHER. EE ENTERED HOPPER TO PRY STONE LOOSE. EE STEPPED ON LOOSE STONE THAT ROLLED OVER THROWING EE FORWARD LANDED ON HSOULDER CAUSING DISLOCATION. EE WAS WEARING SAFET Y BELT. X-RAYS SHOW NO BROKEN BONES.
SERVICING FORK LIFT,HAD JACKED LIFT UP AND WAS ON WOODEN BLOCKS ON BACK WHEELS,FRONT WHEELS ON GROUND.FRONT WHEELS CHUCKED IN ONLY ONE DIRECTION LIFT DRIFTED OFF BLOCKS AND MASHED EMPL.
WORKING ON 20FT PIECE OF 8IN CHANNEL IRON MAKING CONVEYOR HAD MATERIAL BETWEEN LEGS MATERIAL GOT OVER BALANCED AND FELL CATCHING 2ND FINGER ON LEFT HAND MASHED END OF FINGER REQUIRING 8 STITCH ES