Buscar en el registro

Employee was standing on an incline in the screen deck with a hammer to hit the screen deck to remove built up sand from the screen. When reaching out his left foot slipped and he reached out to grab the screen deck. When grabbing the deck he strained his back.

EMPLOYEE WAS ATTEMPTING TO LOOSEN A BOLT HOLDING THE RAIL ON THE LJ SCREEN. THE BOLT WAS OVERHEAD & EE WAS ON THE GROUND. AS HE PUSHED UP WITH THE HAND WRENCH HIS KNEE GAVE OUT.

WALKING DOWN CONVEYOR WALKWAY AND STEPPED ON A SMALL ROCK AND KNEE POPPED.

EE STATES THAT HE HAS A SORE BACK FROM SHOVELING. HE ALSO HAS A SKIN IRRITATION ON BOTH CHEEKS FROM THE ELASTIC BANDS ON HIS RESPIRATOR. HE CAME INTO WORK THE MORNING OF 08-14-2002 & COMPLAINE D OF A STOMACH ACHE & WENT HOME. THE NEXT DAY HE CAME INTO THE OFFICE & STATED THAT HE HAD A SORE BACK & THE IRRITATION ON HIS FACE.

EE WAS KNEELING DOWN WHILE SHOVELING LOOSE MATERIAL FROM UNDER A CONVEYOR BELT. WHEN HE STOOD UP HE FELT A PULL IN HIS FROIN AREA. AFTER TWO TO THREE HOURS HE NOTICED ONE OF HIS TESTICLES HAD SWOLLEN.

EMPLOYEE WAS SHOVELING LOOSE AGGREGATE MATERIAL WHEN HE FELT A PAIN IN HIS BACK.

EE WAS WALKING UNDER A CONVEYOR WHEN A LOOSE END OF HIS BANDANA WAS CAUGHT IN A PULLY AND HIS HEAD WAS PULLED BACK. THE BANDANA WAS WORN UNDER HIS CAP AND APPRENTLY WAS NOT TUCKED IN PROPERLY. THE PULLING ON THE BANDANA RESULTED IN A SORE NECK.

EMPLOYEE WAS STEPPING ONTO LOWER DECK ON THE LJ CRUSHER WHEN HE STEPPED ONTO A STONE CAUSING HIS FOOT/ ANKLE TO TWIST. THE TWISTING OF HIS FOOT/ ANKLE RESULTED IN A MINOR SPRAIN.

EE WAS WALKING UP A SLOPE AND STEPPED INTO A HOLE AND INCURRED WHAT HE THOUGHT WAS A SPRAIN. HE CONTINUED WORKING FIGURING THAT HIS ANKLE WOULD STOP HURTING. AFTER SEVERAL WEEKS AND THE PAIN C ONTINUING HE WENT TO A DR FOR X RAYS AND MRI ANDDISCOVERED TORN AND STRETCHED TENDONS.

EE WAS LIFTING A SHAKER SCREEN AND STRAINED HIS BACK.

EE WAS GREASING THE BEARINGS OF THE FRONT PULLEY ON THE CONVEYOR BELT. HE REACHED AROUND IN BEHIND THE GUARD WHILE THE CONVEYOR BELT WAS IN MOTION. WHILE ATTEMPTING TO PUT THE GREASE GUN TIP O N THE ZERK HIS LEFT RING FINGER WAS CAUGHT BETWEEN THE CHAIN AND THE SPROCKET. THIS RESULTED IN HIS FINGER TIP BEING SEVERED AT THE FIRST KNUCKLE.

EMPLOYEE WAS LIFTING A SHAKER SCREEN AND STRAINED HIS BACK.

REMOVING BUILT UP MATERIAL FROM THE SIDES OF SHAKER BIN. EMPLOYEE REMOVED COMPLETE WIDTH OF MATERIAL INSTEAD OF REMOVING MATERIAL IN VERTICLE PASSES ALLOWING MATERIAL FROM ABOVE TO SLIDE DOWN PINNING HIS LEG UNDER THE MATERIAL.

WORKING ADJUSTING BELT WIPER WHEN CONVEYOR WAS IN MOTION FINGER WAS CAUGHT UNDER BELT WIPER WHILE CONVEYOR WAS IN MOTION

OPERATING 966 LOADER STOCKPILING. HIT A HOLE WHEN THE SUN OBSTRUCTED HIS VIEW. FELT SIMILAR TO ELECTRIC SHOCK TO LOWER BACK, WHEN BENDING & STEPPING WITH RIGHT FOOT OR USING RIGHT LEG IT FEELS LIKE AN ELECTRIC SHOCK.

WAS OPERATING A LOADER IN REVERSE & WAS TURNING AROUND TO VIEW HIS BACKING INSTEAD OF USING THE MIRRORS WHILE HIS BODY WAS TWISTED (FROM LOOKING AROUND) HE HIT A BUMP IN THE ROADWAY CAUSING A MUSCLE TO BE PULLED IN HIS RT SHOULDER

HAND SLIPPED OFF WRENCH HE WAS USING WENT IN PULLEY FINGERS SCRAPED

PATIENT STATES HE WAS TURNING AROUND ON THE EDGE OF A PIECE OF EQUIPMENT WHEN HE LOST HIS FOOTING. WHILE PREVENTING A FALL FROM THE EQUIPMENT AND REGAINING HIS FOOTING THE PATIENT STRAINED HI S BACK. IN FACT THERE WAS NO DISTANCE GREATER THAM 1 FOOT FOR HIM TO FALL.

PATIENT STATES HE WAS PULLING GEAR BOX FROM THE SHAFT AND GEAR PULLER HIT LEFT EYE BOWER AND RIGHT HAND.

HE WAS HAMMERING TIP ON BUCKET LOADER PIECE OF METAL BROKE OFF & WENT THROUGH LEG.

PULLING SCREEN TO CHECK ON SHAKER.

ADJUSTING BELT IN TUNNEL PULLED BELT UP AND HIT MIDDLE OF BACK ON CROSSBEAM

DUMP TRUCK HIT 6ERM LONG SIDE ROAD LOST CONTROL.

CLEANINGOUT CON5EYORS WITH A SHOVEL

SHOVELING DIRT 0ROM UNDERNEATH CONVEYOR BELT, TWISTED BACK.

HOLDING ONTO RAIL STEPPING OFF LOADER,SLIPPED WHICH CAUSED ARM TO PULL TOWARDS HIS BACK.

MOVING BIG ROCK CAUGHT IN FEEDER.HURT LOWER BACK.