Buscar en el registro

POSITIONING ROOF PLATE ON COAL DRIER. PRY BAR IN LEFT HAND, RIGHT HAND ON TOP OF PLATE. RIGHT RING FINGER PROTRUDED AS PLATE WENT INTO POSITION FINGER TIP WAS PINCHED AGAINST VERTICAL PLATE.

EMPLOYEE WAS WORKING AS PART OF CREW AND STRUCK LOWER LEG AGAINST LADDER BRUISING SAME.

EMPL OPENED OUTSIDE DOOR OF 93 ELEVATOR AND INSIDE DOOR ON 6TH FLOOR.EMPL FELT SHARP PAIN IN LOWER PART OF HIS BACK.AS TIME PASSED,PAIN GOT WORKSE.DOORS ON ELEVATOR OPENED WITHOUT ANY PROBLEM, DIDNT JAM IN ANY WAY.EMPL STARTED MISSING 6-19.

EMPLOYEE WAS STOOPING DOWN & HOSING UNDER A365 WHEN EMPLOYEE STOOD UP HE FELT A SHARP PAIN IN LOWER BACK PAIN INCREASED AS SHIFT PROGRESSED EMPLOYEE DID NOT SLIP OR TRIP STARTED MISSING WORK D UE TO ACCIDENT ON MAY 7 1990

CRAWLING IN TO PLANT, ON PIPE, WENT THROUGH HOLE ON EAST WALL BROUGHT R LEG AROUND TO PLACE ON FLOOR FELT PAIN IN KNEE

EMPLOYEE WAS LEAVING CATWALK WHEN FOOT SLIPPED FROM TOP STEP CAUSING EMPLOYEE TO FALL (APPROX 3') AND HIT BACK ON FLOOR. AREA WAS NOT SLIPPERY AND NO OBJECTS WERE LYING ON STEPS OR CATWALK. EM PLOYEE STARTED MISSING WORK ON 3/19/90 DUE TO INJURY.

EMPL CLIMBING DOWN OVER FAN WHEEL,FOOT SLIPPED CAUSING SHIN TO HIT EDGE OF VANE ON FAN WHEEL.IT WAS SECURED IN PERM.POSITION BEFORE EMPL STARTED DOWN SIDE OF FAN.

EMPL WAS ATTEMPTING TO REMOVE BOLT FROM PUMP HEAD BY APPLYING PRESSURE ON BOLT WITH BOX END WRENCH. WHEN BOLT SUDDENLY CAME LOOSE EMPLS HAND SLIPPED OFF OF WRENCH CAUSING EMPL TO HIT HAND ON E DGE OF PUMP HEAD.

EMPLOYEE WAS DISMOUNTING TRUCK CAB IN A BACKWARD MANNER WHEN HE STEPPED ON A PIECE OF REFUSE WITH THE INSIDE EDGE OF THE BOTTOM OF HIS LEFT FOOT CAUSING HIM TO TWIST HIS ANKLE.

EMPLOYEE WAS ATTEMPTING TO OPEN ELEVATOR DOOR ON GROUND FLOOR DOORS OPENED ABOUT 6IN & STOPPED MAN SQUATTED DOWN TO PUSH UP ON TOP DOOR & WHILE PUSHING UP ON DOOR HE FELT A HOT BURNING SENSATI ON IN GROIN AREA

EMPLOYEE WAS TRYING TO GET A STEEL PLATE OFF OF PLATE RACK IN THE FAB SHOP. HE HAD A PIECE OF ANGLE STUCK BETWEEN PLATES AND TRIED TO SLIDE THE PLATE OUT WHEN ANGLE SLIPPED OUT CAUSING PLATE TO PINCH FINGERS ON LEFT HAND AT KNUCKLE.

EMPL CARRIES TORCH BOX IWTH TORCHES INSIDE FROM THE WAREHOUSE TO THE ELEVATOR HE PLACED THE TORCH BOX ON THE GROUND UNTIL THE ELEVATOR ARRIVED WHEN HE PICKED UP THE TORHC BOX TO PLACE ITON A C ART THE EXISTING PAININHIS BACK BECAME MORE NOTICEABLE

HE AND ANOTHER EMPLOYEE WERE ATTEMPTING TO REMOVE SHAFT AND BEARINGS FROM PUMP CASING. HE WAS KNEELING DOWN AND PULLING ON SHAFT FROM MOTOR FRAME END AND THE OTHER EMPLOYEE WAS STANDING BESID E HIM AND PULLING ON SHAFT, WHEN SHAFT BEARINGS AND BEARING HOUSING CAME OUT OF CASING FASTER THEN EXPEXCTED, PINCHING HIS FINGER BETWTTEN END OF SHAFT AND MOTOR FRAME.

EMPLOYEE HAS TO WELD A PATCH ON SCREEN DECK. AREA THAT NEEDED PATCHED WAS ON DECK LOCATED UNDER SPRAY BAR, CAUSING EMPLOYEE TO WORK IN C RAMPED POSITION. AFTER EMPLOYEE COMPLETED WELDING HE A TTEMPTED TO GET OUT FROM UNDER SPRAY BAR AND TWISTED HE RIGHT SIDE OF HIS LOWER BACK AND HIP.

EMPLOYEE WAS WALKING ON REFUSE WHICH WAS JUST SPREAD ON REFUSE PILE AND SLIPPED TWISTING LOWER BACK EMPLOYEE DID NOT FALL

EMPLOYEE WAS WALKING ON THE 2ND FLOOR AND CARRYING A 5 GALLON OIL CAN TO THE LEVATOR WHEN HIS RIGHT FOOT TURNED UNDER.EMPLOYEE DID NOT SLIP TRIP OR STEP INTO ANYTHING.

EMPL WAS REMOVING BAD FILTER SECTR SEGMENT FROM AKI PETERSON WHEN SECTOR SEGMENT SLIPPED PINCHING EMPL FINGER BETWEEN WATER PIPE & SEGMENT.

EMPLOYEE AND ANOTHER MECHANIC WERE LIFTING A 4 FOOT SECTION OF 8" METAL PIPE ONTO A FAB TABLE WHEN EMPLOYEE FELT A PAIN IN HIS UPPER BACK (FAB TABLE IS 3 FEET HIGH

EMPLOYEE WAS SWEEPING SAMPLE BLDG.WHEN HE KNOCKED HIS HARD HAT OFF HIS HEAD WHEN HE BENT OVER TO PICK UP HIS HARD HAT HE HIT HIS HEAD ON THE CORNER OF A COAL CHUTE

EMPLOYEE WAS HAMMERING STEEL PLATE ONTO BOTTOM OF PETERSON FILTER WHEN HE HIT HIS FINGER WITH THE HAMMER

EMPLOYEE WAS CUTTING OVERFHEAD PIPE WITH TORCH WHEN A PIECE OF SLAG WENT IN HIS RIGHT EAR

EMPLOYEE WAS CLEANING OUT CHUTE WORK BY USING A PRYBAR WHEN HE GOT HIS FINGER PINNED BETWEEN PRYBAR AND CHUTE.

EMP WAS USING A 6X6 CRIB BLOCK TO POUND A URETHANE FEED LINE INTO HYDROCYCLONE WHEN HE FELT PAIN IN LOWER BACK

EMPLOYEE STEPPE8 FROM SCREEN TO FLOOR& HEARED CRACKING SOUND FROM RGHT FOOD. EMPLOYEE DID NOT SLIP OR SETP ONTO ANYTHING.

EMPLOYEE WAS WO9KING ON BELTS FOR THE SCREENS AND WHEN HE EXITED SCREENS FROM VOER THE SIDE HE STRAINED HIS BACK.

EMPLOYEE WAS DESCENDING STEPS AT DRYER AREA AND SLIPPED ON AN ICY SPOT, TWISTING UPPER BODY.

EMPLOYEE HAD PR9VIOUSLY REMOVED GRATING FROM UPPER FLOOR OF LOW HEAD PUMP ROOM IN ORDER TO LOWER MOTOR TO FLOOR BELOW. EMPLOYEE WAS WORKING ON BOTTOM FLOOR WHEN H E ASCENDED A STATIONARY LADDE LADDER TO GET T2 UPPER FLOOR. AS HE PUTCHAIN ACROSS OPENING TO TOP OF LADDER HE TURNED AND TOOK A STEP FORWARD, ACCIDENTLY STEPPING INTO OPENING WHERE GRATING WAS R EMOVED. AS HE WAS FALLING

EMPLOYEE WAS MO5ING CART AND ACETEYLENE TANKS FROM ONE SIDE OF THE PLANT TO THE OTHER WHEN HE TRIPPED ON A CEMENT PLATFORM STEP-UP, AUSING HIM TO LOSE HIS BALANCE AND HAVING THE HANDLE OF THE CART HIT HIS RI1HT KNEE.

EMPLOYEE WAS IN8PECTING FRESH WATER SUMP AND DESCENDING A LADDER WHEN HE SLIPPED OFF OF LADDER (2ND RUNG) HITTING BACK AGAINST CONCRETE WALL WHICH WAS APPROX. 9" AWAY.

EMPLOYEE WAS DE7ENDING STEPS FROM STROKER FEEDER BIN TO FURNACE ROOM WHEN HE MISSED STEPPING ONTO A STEP CAUSING HIM TO FALL. AS EMPLOYEE FELL HE EXTENDED BOTH ARMS AND CAUGHT HIS ARMS ON THE VERTICAL SUPPO9T FOR THE HANDRAILS.

STARTED MISSING3WORK DUE TO ACCIDENT ON 8-17-87.EMPLOYEE WAS HOSING FLOOR AREA AND STRUCK HEAD ON A PIPE.

EMPL WELDING IN3''A'' DRYING CHAMBER WHEN HOT SLAG FELL INTO HIS BOOT.

EMPLOYEE WAS SH2VELING WET MAGNETITIE FROM FLOOR WHEN HE LIFTED A SHOVEL FULL OF MAGNETITE AND STRAINED HIS BACK.

EMPLOYEE WAS PU5LING ON WASHDOWN HOSE TO MOVE TO ANOTHER LOCATION AND STRAINED LEFT SHOULDER.

SEE ATTACHMENTS1EMPLOYEE WAS REMOVING DRIBBLE PANS FROM UNDER CONVEYOR #19 AND WAS WALKING UNDER CONVEYOR #19 IN A BENT POSITION AND WALKED INTO APIECE OF ANGLE IRON WHICH WAS CONNECTED TO CON VEYOR STRUCTURE1

EMPLOYEE WAS SH2VELING A COAL SPILL & PICKED UP A SHOVEL FULL OF COAL & STRAINED LOWER BACK

EMPLOYEE WAS WA5KING OUT OF HER OFFICE WHEN HER RIGHT FOOT SLIPPED CAUSING HER TO LOSE HER BALANCE AND RIGHT FOOT TO TURN UNDER.FLOOR WAS DRY AND NOT SLIPPERY.

EMP WAS STANDIN1 ON TOP OF C STORAGE BIN AND MOVING EQUIPMENT PARTS WHEN HE STRAIGHTENED UP CAUSING HIS HEAD TO BE HIT BY CEILING FAN

EMPLOYEE WAS SH2VELING SPILLED REFUSE FROM G ROUND WHEN HE FELT A PAIN IN HIS LOWER BACK REFUSE SPILLED ONTO GROUND FROM OVER THE SIDE OF THE REFUSE TRUCK EMPLOYEE RETURNED TO WORK ON 012287 & WORKED 012223&24 1987 EMPLOYEE STARTED MISSING WORK DUE TO INJURY ON 012687

EMPLOYEE WAS MA9KING WORK AREA TO BE CUT, WHEN ANOTHER EMPLOYEE ACCIDENTLY MOVED A LIT TORCH TO THE WORK AREA BEFORE EMPLOYEE MOVED HIS HAND OUT OF WORK AREA, CAUSING FLAME FROM TOUCH TO BURN BACK OF HIS HAN8.

EMPLS HAD PUMP 2ANGING ON 2 CHAINFALLS,1 WAS SLACKED AND HOOK WAS BEING REMVOED FROM SHACKEL.WHEN HOOK WAS REMOVED FROM SHACKEL,PUMP TIPPED AND PINNED EMPL BETWEEN PUMP AND ADJACENT MOTOR.

EE WAS STEPPING3UP ONTO PLATFORM WHERE DRIVE UNIT SITS FOR B55A TO INSTALL CLEVIS ON ELBOW WHEN EE EXPERIENCED PAIN IN LEFT KNEE.,

EMPLOYEE WAS HA3GING PIPE WHEN PIPE CLAMP BECAME LOOSE AND SPRUNG BACK, HITTING EMPLOYEE ABOVE UPPER LIP.

EMPL WALKING AR2UND C-SCRUBBER ROOM LOOKING UP AT UPPER ACCESS DOOR AND TRIPPED OVER 2'' PIPE SPOTTED FOR FUTURE WORK.EMPL FELL TO GROUND STRIKING LEFT HAND AND WRIST ON PAVEMENT.

EMP WAS GUIDING3A TORQUE MULTIPLIER-TORQUE WRENCH COMBINATION ONTO A BOLT UNDER THE CMI. TORQUE MULTIPLIER PINCHED EMPLOYEES FINGERS AGAINST DRIVE CASING, AFTER ACCIDENTLY ACTIVATING AIR PRESS URE 3

EMPLOYEE WAS MO5ING A PUMP BARREL ON A FLAT 4-WHEEL CART WHEN THE ROPE ATTACHED TO THE CART WHICH WAS USED FOR PULLING THE CART BROKE CAUSING THE EMPLOYEE TO FALL ONTO CONCRETE.

EE WAS ATTEMPTING TO REMOVE OLD SPRING OFF OF T RUCK WHILE ANOTHER EE WAS USING FORKS ON THE BOBCAT TO HOLD TENSION, WHEN THE ONE FOEK SLIPPED OFF OF THE ONE SIDE OF THE SPRING, PINNING EES HA ND BETWEEN TRUCK FRAME & SPRING.

EMPLOYEE WAS TIGHTENING A BOLT WITH A WRENCH SLIPPED AND HIT EMPLOYEE ON THE LIP.

EMPLOYEE WAS PICKING UP SCRAP METAL TO REMOVE FROM PLANT WHEN EMPLOYEE THREW A PIECE OF METAL ONTO PILE AND RAN THE SHARP EDGE OF THE SCRAP METAL OVER HIS HAND.

EMPLOYEE WAS TAKING A NEW PUMP BARREL & SHAFT ASSEMBLY INTO PLANT ON A CART WHEN MOVING CART DOWN A SMALL RAMP, THE CART OVERTURNED, HITTING EMPLOYEES FINGER