Buscar en el registro

PICKING UP PC OF BELT ONE FELL STUCK ON TOP OF HEAD

EMPLOYEE CAUGHT HIS HAND UNDER THE SCOOP BUCKET AND MASHED IT.

EMPLOYEE WAS RIDING OUT OF MINE ON A MINE BOBBY WHEN HE GOT UP HIS BACK STARTED BURNING.HE WALKED 5O FEET TO OFFICE AND GOT DOWN IN HIS BACK.

EMPLOYEE WAS TAKING STEEL OUT OF HOLE AND MASHED FINGER.

ROOF GAVE WAY ABOVE ANCOR ZONE ROOF FALL WAS 20FT WIDE 40TO50FT LONG 5FT TO 51/2FT HEIGHT FALL WAS AT BREAK 30 ON NO 1 BELT IN 5 ENTRY

EE WAS PITCHING TIMBERS FROM SCOOP BUCKET.

ROOF GAVE WAY ABOVE ANCHOR ZONE ROOF FALL WAS 20 FT WIDE 50 TO 60 FT LONG 4 TO 5 FT HEIGHT CLEAN UP ONE IN AND REBOLTED CRIB OFF AND DANGER OF FALL WAS AT NO. 11 BREAK ON NO. 1 INTAKE.

EE WAS HELPING ON ROOF BOLTER PEACE SLONG OF ROOF PLATE RUST HIT IN RIGHT EYE.

HILL SEAM GAVE WAY ABOVE ANCHOR ZONE, 25' L 25' W 7 TO 8' H

RF GAVE AWAY, ABOVE ANCHOR ZONE RF FALL 18'W 55' L 7 TO 8' H CLEAN UP AND =RE BOLTED

STARTED TRAM-BOLT-MACHINE & GOT IN ON FOOT, TRAM BOLT MACHINE UP ON LEFT FOOT & BRUISE IT, DECK PART OF BOLT MACHINE.

ROOF GAVE WAY ABOVE ANCHOR ZONE. ROOF FALL WAS 25' LONG AND 18' WIDE, 4 1/2' HEIGHT. CLEAN UP AND REBOLTING 6' AND 4' RESIN BOLTS. FALL WAS AT NO. 6 BREAK IN THE INTAKE.

ROOF GAVE WAY ABOVE ANCHOR ZONE. ROOF FALL WAS 30 FT LONG 20 FT WIDE 6 TO 8 FT HEIGHT. WE HAD 4 FT RESIN BOLTS. ROCK FELL ON FRONT CRAWLER (JEFFREY 50B)

EMPLOYEE WAS CRAWLING UP NO 2 ENTRY SMALL PIECE ROCK FELL OUT STRUCK ON RT ARM

EMPLOYEE HURT HIS BACK BY BENDING AND STRAINIG RESIN ROOF BOLTS.

EMPLOYER WAS HELPING THE MECHANIC IN THE SHOP WORK ON A SCOOP. WHEN HE CUT HIS HAND ON A PIECE OF TIN.

EMPLOYEE WAS TAKING WATER LINE A PART UNDERGROUND AND A SCOOP OPERATOR OPERATING A AR-4 ELKHORN SCOOP ON HIS WAY OUT STRUCK EMPLOYEE RIGHT FOOT.

ROOF GAVE WAY-ABOVE ANCOR ZONE-ROOF FALL WAS 25 TO 30 FEET LONG 20 FEET WIDE 4 TO 6 FEET HEIGHT WE HAD BELT LINE COVER UP AND ONE CRAWLER 503 JEFFREY CRAWLER LOCATION.BELTLINE STARTED 165 FEET INSIDE.

ROOF GAVE WAY ABOVE ANCHOR ZONE. ROOF FALL WAS 75-80 FT LONG, 20 FT WIDE, 4-6 FT HIGH. WE HAD INSTALL 4-6' ROSEN BOLTS AND 7X9 CROSSBAR. LOCATION - NO.4 INTAKE- STARTED 60' INSIDE.

INSTALLING ROOF BOLTS.

RIDE IN BUGGY RAN OVER TIMBER PUT HIMIN TOP

MOVING BOLT MACHINE.

CHANGING ROLLER ON BELT DRIVE.

INSTALLING ROOF BOLTS BENDING ROOF BOLTS.SLIPPED IN HAND CAUSING QUICK SLIP STRAINED MUSSEL TO LOWER BACK.

TRAVEL FROM FACE TO OUT SIDE IN PERSONNEL CARRIER RUN IN THE SCOOP. AND BRUISE LEFT FOOT SCOOP WAS PARK LONG SIDE ROADWAY.

LIFTING BUCKET OF WATER ACROSS BELT.

EE WAS IN PROCESS OF SETTING BELT HEAD MOVE POWER CENTER BY PUSHING IT WITH THERE FEET AND STRAINED HIS BACK.

EMPL WAS CUTTING BEARING OFF OF 94L BRIDGE SHAFT WITH ACETYLENE TORCH EMPL SLIPPED & FLAME BURNED LEFT HAND.

MOVING CRAWLER BACKED OVER A PIECE OF WOOD PUSHED OPER IN TO ROOF BRUISEDA LOWER BACK

EMPL WAS SHOVELING BELT LINE WITH A SHOVEL & STARTED HURTING IN LOWER BACK.

LET ROOF BOLTER HEAD DOWN ON LEFT FOOT & ANKLE.

FOUR MEN WERE PUSHING DOLLIE ON TOP OF LOW STRUCTURE TO GET IT IN POSITION TO PUT BRIDGE ON IT & EMPL CAUGHT MIDDLE FINGER ON LEFT HAND UNDER DOLLIE WHEEL.

EMPLOYEE WAS LEAVING SUPPLY TRAILER AND TURNED HIS ANKLE CAUSING HIM TO FALL.

EMPLOYEE WAS HANDLING 36" CONVEYOR BELT OUTSIDE MINE, CUTTING AND SPLICING IT TO CORRECT LENGTH.

EMPLOYEE WAS LOADING ROCK DUST IN BAGS FROM A UTILITY TRALIER INTO A SCOOP DIPPER TO BE TAKEN INSIDE MINE. WHILE LOADING BAGS THE MAN STRAINED HIS BACK.

EMPLOYEE WAS FINISHING BOLTING A PLACE & WAS IN PROCESS OF PUTTING SAFETY JACKS BACK ON ROOF BOLTER & TURNED AROUND WHILE IN A STRAIN & LEFT HIP