Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
Employee was pushing dirt with a D6 dozer and while going backwards he ran over a rock and hurt his shoulder. Employee went to the Dr., and was told he had a pulled muscle. The employee returned to work the following day. The employee continued to complain of pain in his shoulder and went back to the Dr, and has been put off work.
Employee was changing bit on the Highwall miner head and a rock became dislodged from the wall and hit the employee and knocked him into the miner head. The employee received a fractured right wrist and two fractured vertebrate.
Employee put hand under the endpeller before it was secure. The endpeller struck his right index finger.
Employee was shoveling the power head on the highwall miner, the miner was on a steep a grade and the beam he was standing on was wet and muddy. The employee slipped and when he tried to catch himself he pulled something in his back.
Employee was traveling up a hill in a pick-up truck and hit a large hole in the road. It shook the employee and caused whiplash. The employee was taken to the Harlan ARH. He has a bulging disc in his neck.
Dozer was cleaning the highwall and over extended and material gave out and caused the dozer to slide and over turn one time. The operator was thrown in the floor and suffered five broke vertebrae, two broken ribs, punctured stomach, bruised intestines, cut on the ear, and a broken foot.
Truck Driver was traveling down a ladder and slipped and fell to the ground and broke his ankle.
The employee was attempting to remove a crane from a mechanics truck when the two chains he was using one of them came off. This allowed the base of the crane to fall to the floor. The employee was then struck in the leg by the crane and received a compound fracture to the right leg.
The operator was climbing down off of his loader and stepped into a hole. When he did it twisted his back and hip. He continued to work until 08/23/2011 when the doctor he went to see put him off work for therapy. Again he did not get put off work until 08/23/2011.
The employee was putting a primer box up in the top of a magazine and the box fell down. He tried to catch the box and felt something pull in his shoulder. The doctor put him on light duty at that time. He continued to have pain and the doctor put him off of work until he could see a neurosurgeon. Date 07/26/2011. The employee was on light duty from 05/23/2011 to 07/26/2011.
The employee came down a ladder when the bottom kicked out, causing him to fall and strike his head on concrete floor. The doctor said he had a concussion.
The employee was trying to hold one end of a auger head when the weight shifted to his side and he felt something pull in his back.
The employee was pressure washing and he brought the wand in front of his body when it caught on his rain suit. Then the wand sprayed 180 degree water into his rubber boot. This blistered the top of his left foot.
EE was working from extension ladder, when base of ladder slid back, causing EE and ladder to fall. EE received medical treatment on 2/22/11. this will be a lost time injury.
The employee moved a rock truck and the bed free fell there fore shaking the employee. His back & neck was bothering him. He said he didn't need to go to a doctor. Went to doctor at later date. WE WAS NOTIFIED 03/14/2011 OF HIS PROBLEM AND ABOUT THE DOCTOR WANTING HIM TO BE OFF WORK FOR THERAPY. accident date 11/19/2010 - off work date 03/14/2011
The employee was pulling a pin out of a highwall miner beam, when the pin got stuck and he attempted to pull harder and he didn't use his legs to pull the pin, he instead used his back and it resulted in a strained back.
climbing up on excavator, foot slipped, hit his knee, torn ACL. Doctor put him off of work 12/08/2010. He had not missed any work till 12/08/2010. Accident date 11/03/2010
The employee was using a 20 pound sledge hammer to hit the pins on a beam for a highwall miner. He raised the hammer over his head and came down with the hammer, when he felt something pull in his back. He worked the rest of the shift and went home and had to go the ER becuase he said he was in pain.
A cap from an oxygen cylinder fell off top floor of the plant fell 45' below and landed on the EE's right hand causing a laceration that required two stitches. The EE missed one day of work and returned to regular duty on his next sch. shift.
The excavator dropped a big rock onto the truck that EE was driving and it shook the truck therefore he said it hurt his neck.
There had been a small shower and the road was slick. The water truck driver started out from the pond and up the hill. He had almost got to the top of the hill when the truck spun out. Then the truck went backwards down the hill about 130 feet. The truck went up the spoil on the driver side and turned over onto the passenger side of the truck.
Employee was unstopping oversized rock chute. A big rock was lodge in chute, it dislodged, fell down the chute, bounced and struck employee in leg. Employee received medical treatment and lost 5 days.
The employee had a come-along hooked to the nose cone of the dozer then was releasing the come-along and there was more slack came in the come-along than expected. The employee tried to get out of the way and to stop the nose cone but was unable. The nose cone rested against his leg and the blade. It had his leg until they jacked the nose cone back off.
The employee was attempting to get out of his truck and stepped down to the step on the fuel tank. His boots being muddy his foot slipped and his tail bone hit the fuel tank. He didn't go to the doctor for a couple of weeks till his neck started hurting him. He has not missed any work from 5/12/10 to 12/6/10. The doctor wants him off till after he recovers from the surgery.
The employee was airing up a two piece rim for a mack truck. The rim broke and struck the employee in the upper part of his left arm, this broke his arm.
Service man was taking a cap off to put a hose on a tank and there was some pressure behind it. The oil sprayed in his face and eyes.
It had rained and the employee was climbing down from the service truck when he got his foot tangled up in a chain and slipped and fell. He landed on his hip. It was also muddy since it had rained.
Injury said to foreman that his back was hurting before the shift started. he started to do invetory that morning and picked up a box out of the magazine and went to the ground. he said he was hurting in his right hip and back and leg.
The employee came down a ladder frontward and it was muddy. He said he slipped and then fell. He has a bruised disk the doctor said.
Employee was lifting a heavy drill by himself and injured his back. Employee worked a few more days after it happened before he went to a doctor.
Operator had truck in too high of a gear and tried to downshift on the hill. He was properly trained by an experienced operator on this truck. The miner only received some scratches and bruises.
Employee was climbing into powder truck cab when he slipped and fell backwards. Employee tried to catch himself with his right hand. Broke bone in hand.
EE was welding on dozer blade. Dozer blade was blocked up and blade fell from blocks, hitting EE's right knee and injuring ankle.
Employee was servicing equipment when grease gun splattered grease into employee's eye.
Employee was assisting with repairing 1100 excavator when he jumped from track of 1100 to get a shovel, thus injuring knee.
Employee tripped and fell on deck of R-65 while hooking up jumper cables. Hurt his back.
EE was working an old slide in Hollow when the dirt above slid down on excavator- EE is okay
Employee was traveling access road to get to the drill when the road broke off and turned over the truck he was traveling in.
Employee missed step while climbing down from dozer, hitting the push arm on the dozer while falling, landing on right hand and ribs.
drill operator climbing on front of drill steps when he lost his footing, falling on pit floor, falling backwards 4 or 5 feet.
DOING REPAIR ON EXCAVATOR BUCKET; PIECE OF METALSLIPPED; CUT & BROKE 3 FINGERS ON LEFT HAND
REMOVING ENGINE COVER ON DOZER WHEN WELD BROKE ON COVER- HITTING RIGHT ARM
FELL WHILE ENTERING EXCAVATOR.