Buscar en el registro

A roof fall 750' from face in #6 enrty 5' heigh 18' wide 100' long.

A roof fall at spad #59 inby for 180' 5' heigh 18' wide above the encor zone.

Traveling on 4-wheel buggy, tried to raise curtain with foot and foot got caught in curtain, forcing foot to mine roof.

Making a belt splice on #1 belt. Was holding the nail holder and finger was smashed with a hammer by a co-worker.

Pulling rock off of picking table and another rock fell on fingers.

Received a citation from the local MSHA office stating alleged accident occurred 6 months ago. No record of accident. Mine operator nor co-workers were aware an accident occurred. Attorney will be contacted to handle the denial of the claim. Employees are instructed to inform their supervisor immediately after the occurrance of an accident.

Roof Fall date unsure, sometime between 07-01-08 and 07-07-08. Located at intake airway #9 (2200' from face) 10 x 17 x 15.

Rock caught in tailpiece. Employee used sledge hammer to try to loosen rock and another rock struck ring finger of right hand.

Crawling to roof bolter and twisted right knee.

Operating a roof bolter and pulled bolter deck up on right knee.

Rider seam, no injuries. 18'-20' wide X 20' long X 10'-12' deep. Type of roof was shale. 5' resin bolts were used.

EE was maiking a belt splice. A clamp holding the belt came loose and struck him in the face and mouth, resulting in some stitches inside and outside of his mouth, chipped tooth and loose tooth.

Had a hoist hooked up to a speed reducer to a scoop. The arm of the hoist broke hitting employee on the arm.

Employee was tamping when he went to foreman stating this his side was hurting bad and was getting weak. He said he was going to have to go home and go to the doctor next day. He left at 1 am.

Was operating roof bolter. A rock 1 foot round and 1.5 inches thick fell hitting his finger and cutting it.

Employee was backing roof bolter out of section three left. He had his left arm out of deck, while holding cable out of way. His left arm got caught between the roof bolter and rib.

Injured was observing work being performed by co-worker on cutting machine. Grinding dust and metal went into injured's left eye.

EE was spinning steel out of top of bolter. His arm accidentally hit the up level on the equipment, pinning his index finger against the roof and the machine.

EE was using a hammer on a piece of metal, rust flew into his right eye.

Riding on a electric buggy when he hit his head on the roof causing injury to head, neck and back.

EE WAS OPERATING A BUGGY WHEN HE SAW A SCOOP STUCK. HE GOT OFF THE BUGGY AND HELPED GET THE SCOOP UNSTUCK. WHILE HE WAS CRAWLING BACK TO HIS BUGGY, A LARGE PIECE OF DRAW ROCK FELL ON HIM.

EE WAS SWINGING A SLEDGE HAMMER WHILE BUSTING UP ROCK AND HIS RIGHT SHOULDER CAME OUT OF THE SOCKET.

EE WAS TAMPING A FEEDER HOLE WHEN HE TWISTED AND FELT PAIN IN HIS LOWER RIGHT HIP THAT RADIATES DOWN HIS LEG AND CAUSES PAIN AND NUMBNESS IN HIS RIGHT FOOT.

EE TRAMMED A 482 SCOOP INTO THE #10 HEADING WHEN THE SCOOP QUIT. HE GOT OFF, TOOK THE PANEL BOARD OFF & BEGAN TO WORK ON CAPACITORS. HE STATES THERE WAS A FLASH OF LIGHT AND HE GOT A FACIAL BURN. EITHER DURING THAT TIME OR SOMETIME AFTER, AN IGNITION OCCURRED IN THE AREA TRAVELING ACROSS THE LAST OPEN CROSSCUT FROM #10 TO #8 & OUTBY THE OPEN CROSSCUT A DISTANCE OF 2 CROSSCUTS.

EE WAS BACKING CUTTER OUT OF #10 HEADING AND RAN OVER LOOSE COAL CAUSING HIM TO JAM HIS HEAD INTO THE ROOF INJURING HIS NECK AND SHOULDERS.

EMPLOYEE WAS TRAMMING ROOF BOLTER WHEN RIB FELL INJURING RIGHT LEG.

EMPLOYEE WAS REACHING TO PLUG SCOOP BATTERIES IN AND HURT HIS BACK.

EMPLOYEE WAS ROOF BOLTING WHEN HE BENT A BOLT & HURT HIS BACK. HE WENT ON VACATION 6/29-7/7/03. RETURNED TO WORK 7/7 & WORKED 7/8. NOTIFIED EMPLOYER OF ACCIDENT 7/15/03.

ROOF BOLTER STUCK IN LOOSE COAL #1 BOLTER PUSHED #2 BOLTER CAUSING #2 BOLTER TO SPIN INTO RIB.

SCRAPING RIB PIECE OF ROCK (1'LONG, 1 1/2'WIDE, 3"THICK) FELL FROM TOP HITTING OVER RIGHT EYE CAUSING CUT.

CLEANING UP CUT OF COAL. ROCK FELL OUT BETWEEN BOLTS.

GETTING OFF LOADER FELL ON GROUND HITTING ARM ON BLOCKS OF COAL. CUTTING LEFT ARM.

REMOVING ROCK FROM DRAG CHAIN, EMPLOYEE HURT LOWER PART OF BACK.

DRAW ROCK FELL OUT IN BETWEEN BOLTS HITTING PERSON ON RIGHT SHOULDER.

WHILE TRAMMING WITH ROF BOLTER, ROOF BOLTER RAN INTO EMPLOYEE'S RIGHT KNEE.

BUILDING BRATTICE THROWING PLASTER GETTING IN LEFT EYE.

WAS BOLTING TOP WHEN OPERATOR SAID PIECE OF ROCK FELL FROM TOP HITTING HIM IN BACK. DR SAID EITHER HAD PULLED MUSCLE OR BACK SPASMS.

TRAMING SCOOP PIECE OF ROCK 2' WIDE 2' LONG 3" THICK FELL ON LEG.

RUNNING ROOF BOLTER PIECE OF ROCK MEASURING 1' LONG, 6-1/2" WIDE, 1" THICK. SHARP ON EDGE CUTTING A 1" LONG CUT ON LEFT ARM.

TRAMMING PERSONNEL BUGGY OVER LUMP OF COAL, BUMPED HEAD ON TOP. HURTING LOWER PART OF NECK.

OPERATING SCOOP RAN OVER PIECE OF COAL OR ROCK SITTING IN UPRIGHT POSITION BOUNCED OPERATOR UP CAME DOWN ON TAIL SAID HURT OLD BACK INJURY.

CRAWLING ACROSS SECTION. SAID FINGER STARTED HURTING. DID NOT WORK THE WEEK FORM 6-17 TO 6-24-96CALLED ME AT HOME 6-18-96 AND SAID HE HAD HURT FINGER ON 6-10-96.

PUTTING BOLTER STEEL BACK IN HEAD. HAD HAND OVER BASE ON STEEL PINCHING HAND BETWEEN STEEL AND TOP, TEARING SKIN ON LEFT INDEX FINGER AND ON THUMB.

PUTTING BOLTER STEEL TOGETHER PINCH LEFT INDEX FINGER.

MAKING BELT SPLICE OUTSIDE PIECE OF METAL BROKE OFF HAMMER HITTING WORKER IN NECK

A PIECE OF ROCK FELT IN SCOOP DECK IT OPERATOR ON LEFT SIDE OF FACE.

PULL MUSCLE WHEN STRAIGHTEN A ROOF BOLT OUT. BOLT TWISTED AND BOLTER MAN PULLED MUSCLE.

ROOF BOLTER [INJURED] WAS LOWERING DRILL STEEL WHEN HEAD SLIPPED OFF STEEL & STARTED TO PUSH HEAD BACK UP & PINCHEAD FINGERS.