En todo el registro
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
EE WAS CRAWLING FROM THE FRONT OF THE ROOF BOLTER TO THE OPERATORS DECK. AN INSTALLED ROOF PLATE WAS BENT DOWN BY 2 PIECE OF FALLEN DRAWROCK. THE EE BUMPED HIS LEFT SHOULDER ON THE EDGE OF THE ROOF PLATE CAUSING A 2" CUT WHICH REQUIRED SUTURES.
EMPLOYEE WAS HAULING COAL WHEN HE CAUGHT HIS RIGHT EAR ON A CABLE BOLT.
EMPLOYEE WAS HANGING A CURTAIN AND HIT HIMSELF IN THE LEFT EYE.
EE WAS INSTALLING A ROOF BOLT WHEN A RIB ROLLED STRIKING HIM ON RT. HAND AND INJURING HIS MIDDLEFINGER.
A NON INJURY ROOF FALL IN THE #3 ROADWAY WAS FOUND. THE FALL IS 50'LONG, 4 1/2'HIGH, 18'WIDE. THE FALL IS LOCATED AT SPAD #2950.
DURING A PRE-SHIFT EXAMINATION A ROCK FALL WAS FOUND IN THE #2 ENTRY "INTAKE" BETWEEN SPAD # 2973 & 2941. THE FALL IS 100'LONG, 18-20'WIDE & 4-5'HIGH. THE FALL WAS INVESTIGATED BY 2 MEN.
THE MINE FLOOR WAS VERY MUDDY AND FOOT SLIPPED OFF LADDER, RESULTING IN TWISTING RIGHT ANKLE.
MOVING ROOF DRILL UP. ROCK FELL FROM TOP, STRIKING EYE.
HE STRAINED HIS RIGHT ARM WHILE BOLTING IN HIGH TOP ON 3 LEFT. HE NOTIFIED COMPANY ON 4/16/02 THAT FAMILY PHYSICIAN HAD DIAGNOSED TORN ROTATOR'S CUFF (DIAGNOSED WITHOUT A POSITIVE X-RAY).
A ROCK FALL WAS FOUND IN THE #8 ENTRY AT SPAD #2948. THE FALL EXTENDS TO THE #9 ENTRY MEASURING 19' WIDE, 100' LONG, 8' THICK. THIS WAS A NON-INJURY ROOF FALL.
EE CAME TO WORK AT 3PM STATED THAT HE WAS SICK (STOMACH), HOWEVER HE WENT TO WORK. HE WAS REPAIRING ON A SHUTTLE CAR REPLACING CHAIN WITH CO- WORKER. WHEN CO-WORKER ASKED FOR THE HAMMER HE GOT NO RESPONSE. HE CAME FROM UNDER THE CAR AND FOUND EE LYING ON THE MINE FLOOR. CPR WAS GIVEN AND HE WAS TRANSPORTED TO THE HOSPITAL. PRONOUNCED DEAD AT 10:30PM OF NATURAL CAUSES.
ADVISED FOREMAN THAT WHILE HANDLING MINER CABLE HE FELT PAIN IN HIS GROIN. INITIAL DOCTOR VISIT DIAGNOSED SPRAIN/STRAIN. ON 12/26/01 DOCTOR ADVISED HE NEEDED HERNIA REPAIR. ON 02/18/02 HE WAS CLEARED TO RETURN TO FULL DUTY.
A NON INJURY ROOF FALL OCCURRED IN THE #7 ENTRY. THE FALL WAS 20'WIDE, 50'LONG, X 5'THICK. THE FALL WAS IN THE INTERSECTION AT SPAD #55.
A NON INJURY ROOF FALL WAS FOUND AT 4:40 AM, ON THE 31 BELTLINE AT CROSSCUT #9. THE FALL WAS 4' THICK 20' LONG 20' WIDE.
A NONINJURY ROOF FALL OCCURRED IN THE #3 INTAKE ENTRY ON SECTION 002. THE FALL IS ABOUT 70' LONG7' THICK & 20' WIDE. LOCATED 25' OUTBY SPAD 2665
A NON INJURY ROOF FALL WAS DISCOVERED AT 11:40 PM. THE FALL WAS ON THE 003-0 SECTION IN THE #8 ENTRY IN BY SPAD #2709 EXTENDING INTO THE LAST OPEN CROSS CUT. THE FALL WAS 6' TO 7' THICK BY 80' LONG AND 20' WIDE. THE ROOF IS SHALE WITH SANDSTONE ABOVE THE 7' AREA.
A NON INJURY ROOF FALL WAS FOUND BY THE 3RD SHIFT CREW AS THEY CAME OUT OF THE MINE. A ROOF FALL 40' INBY THE PORTAL ON THE #4 ROADWAY, THE FALL 18' WIDE X 60' LONG X 4' HIGH IS AT SPAD #7. TH E ROOF WAS SUPPORTED BY 4' RESIN PINS AND 7 SETS OF HEINTZMAN WITH 100TON JACKS ON EACH SIDE OF THE 7 SETS.
A NON INJURY ROOF FALL WAS LOCATED BY THE MINE FIRE BOSS. THE FALL WAS AT SPAD #2697 IN THE #2 ENTRY. THE FALL WAS 20' W X 50'L X 5' THICK.
A NON INJURY ROOF FALL WAS FOUND BY MINE FIRE BOSS AT 10:00 AM ON 7-28-01 IN THE #2 ENTRY OF THE INTAKE AIR COURSE. THE FALL WAS ABOUT 30' LONG BY 3-6' THICK BY 20' WIDE AT SPAD #137.
EMPLOYEE WAS PULLING SLACK UP ON MINER CABLE, HIS HAND GOT CAUGHT BETWEEN CABLE AND COAL RIB.
A NON-INJURY ROOF FALL ON THE #002 PILLAR SECTION 6 XCUTS INBY THE 2ND LEFT PANEL #1 ENTRY. THE FALL, 35'L, 20'W, 8'H. THE FALL FELL ON THE JOY MINER & TWO MRS. THE EQUIPMENT WAS RECOVERED 21 HOURS LATER.
EMPLOYEE WAS STRUCK BY A BROKEN METAL OBJECT IN THE RIGHT SIDE WHILE ATTEMPTING TO HAMMER METAL BACK IN PLACE IE ROOF STRAP.
EE WALKED UP BESIDE THE MINER TO CHECK STAND OFF AND ROCK FELL STRIKING HIM ON HEAD AND LEGS.
EE WAS OPERATING 4 WHEEL MAN TRIP WHEN THE BALL OF THE WHEEL STRUCK HIS HAND.
EE WAS CUTTING BREAK IN #7 ENTRY AND HAD TO MOVE CABLE. WHEN HE DID MOVE THE CABLE HE HAD PAIN IN LEFT SIDE, LOWER BACK AND LEFT LEG.
EMPLOYEE WAS LOADING TOOL BOX IN SUPPLY HOLE WHEN HE INJURED GROIN.
EE WAS OPERATING MINER WHEN A ROCK FELL FROM BETWEEN THE ROOF BOLTS, STRIKING EE ON RIGHT SHOULDER.
EE HIT BUMP IN ROADWAY CAUSING HIS HEAD TO HIT CANOPY. FELT PAIN IN NECK AND BACK.
EE WAS ON ROOF BOLTER PUTTING UP CURTAIN BOARDS BOARDS FELL DOWN ON FINGER
EE WAS ON SCOOP PULLING THE HIGH VOLTAGE SLED OUT OF BREAK WHEN SLED CAUGHT ON RIB CAUSING IT TO SUDDENLY SLIDE AROUND HIT EE ON LEFT LEG FRONT SIDE BELOW KNEE
A ROOF FALL OCCURRED NEAR #1 CROSSCUT OUTBY SPAD#454 ON #3 BELTLINE. FALL MEASURED 20'W X 70'L X5-8'THICK. THERE WERE NO INJURIES.
EE WAS MOVING MINER CABLE SLACK OUT OF WAY WHE HE FELT A BURNING PAIN IN HIS LOWER BACK
ROOF FALL ON WORKING SECTION PILLAR LINE.
FALL IN THE #5 BELT ENTRY AT SPAD #421. THE FALL WAS 30' X 20' X 6'.
DURING AN EXAMINATION OF THE MINE'S VARIOUS ROOF FALL WERE FOUND LOCATION SPAD #296, SPAD 325 THE ROOF FALL WERE 20' WIDE AND 20' TO 160' LONG & 6' HIGH.
ROOF FALL WAS LOCATED XXXXXX XXXXXX OF THE RETURN AIRWAY THE ROOF FALL WAS 20' X 20' X 6' IN THE #7 ENTRY, 2 XCUTS INBY THE FAN.
EE WAS WORKING ON WHEEL UNIT OF SHUTTLE CAR, HE WAS HITTING ALLEN WRENCH TO TIGHTEN BOLTS, MISSED AND HIT LEFT HAND BETWEEN THUMB AND FOREFINGER.
THIS EE WAS INJURED SOME TIME AGO, ON 5-10-99 EE WENT TO THE DR. HE HAD OUTPATIENT SURGERY, THEN ABOUT 6-25-99, PAIN CAME BACK. CO. ELECTED FOR SECOND OPINION. SECOND DR. STATED THAT EE HAD AN ABCESS OF THE SURGERY AREA. DUE TO THE NATURE OF THE ABCESS, EE STARTED TO LOSE TIME.
A ROOF FALL WAS LOCATED IN THE #6 ENTRY OF SPAD #597 7 TO 20' WIDE 10' THICK 140' LONG.
A ROOF FALL OCCURRED ON THE PILLAR LINE AS THE JOY MINER WAS BACKING OUT OF THE FINAL STUMP. THE ROOF GAVE WAY AND THE HEAD OF THE MINER WAS CAUGHT. THE AREA WAS CHECKED THEN THE MINER WAS RETRIEVED.
A NON INJURY ROOF FALL 60' LONG 6' HIGH BY 16-20' WIDE WAS LOCATED DURING THE SHIFT. THE ROOF FALL WAS SOME 50+ CROSS CUTS OUT BY THE FACE IN THE #6 ENTRY. ALSO A SMALLER FALL IN THE SAME CROSS CUT IN THE #3 ENTRY.
ROOF FALL IN #4 ENTRY AT SPAD #282. A FALT LIKE A HORSE BACK 0" TO 6" TX20'WX30'L. THE AREA HAD BEEN BOLTED WITH 48" BOLTS & SPOT BOLTD WITH 60" BOLTS. THIS IS A NON INJURY REPORT.
2 ROOF FALLS ADJACENT FROM EACH OTHER. 2 BREAK INBY #245 TO 246. ONE IS IN LEFT RETURN THE OTHE IS A NEUTRAL. DOUBLE HILL SEAMS.
EMPLOYEE REPORTED LATE FOR WORK IN HIS BAST TO MAKE UP TIME HE WAS ATTEMPTIN GTO COUPLE THE MOTOR TO THE SUPPLY CAR HE CAUGHT HIS RIGHT MIDDLE FINGER BETWEEN THE COUPLER AND PIN.
A NON INJURY ROOF FALL IN THE BELT ENTRY INBY SPAD #136, A DISTANCE OF 70'. THE FALL WAS 18' WIDE AND 6' THICK
EE WAS REMOVING A CABLE ANCHOR FOR THE SHUTTLE CAR. THE EE WALKED INTO A SUSPENDED BELT HANGER CUTTING HIS EAR DUE TO INATTENTION. EE WAS TAKEN TO E.R. 4-5 STITCHES IN HIS LEFT EAR. EE RETURNE D TO WORK FOR HIS NEXT SHIFT.
ROOF FALL FIVE BRAKES UNDERGROUND IN THE BELTWAY ENTRY. FALL WAS 70' INBY SPAD #34. THE FALL 70' LONG, 10' THICK AND 20' WIDE. THE AREA HAD BEEN BOLTED WITH 4,5, AND 6' BOLTS SUPPELEMENTED WIT H CRIBS AND TIMBERS.
EE WAS PULLING MINER CABLE AND WATERLINE OUT OF MUD AND HURT HIS BACK Y
EMPLOYEE WAS PUSHING ROOF BOLT UP AGAINST THE ROOF AND THE BOLT BENT THEN BROKE CAUSING THE ROOF BOLT PLATE TO STRIKE THE EMPLOYEE ON THE NOSE.
WAS OPERATING A ROOF BOLTER WHEN HE SLIPPED AND FELL IN THE MUD, TWISTING HIS RIGHT KNEE.