Search the record

Miner was negotiating stairs to perform maintenance on a screen. When they turned to face screen, their foot slipped off of the stair tread causing them to trip down the remaining two steps and sit down on top of their right foot/ankle. Miner was evaluated for right ankle strain.

Employee was running on mine surface and rolled right ankle. Employee is unsure exactly what happened to cause the ankle to roll.

Employee was loading conveyor onto the transport truck grabbing the railing when EE's hand slipped falling straight backwards onto EE's left side.

EE was pulling a 1 1/2 inch fire hose to clean off piece of equipment, as EE was walking backwards, tripped in rut and fell to ground.

On 04/04/2022 EE climbed down the ladder on the loader that EE was operating to close the gates to the haul road. As EE stepped down on the lower rung of the ladder, it broke away from this support. EE grabbed the ladder as EE fell straining left arm bicep when EE caught self from falling. PT wasn't ordered until 06/13/2022.

Employee was climbing ladder onto haul truck, hands slipped, twisted left side back.

Employee stated EE slipped and buckled EE's knee. Employee stated EE was handing a section of screen media to another employee, EE needed to step on the electric motor for the stationary screen to get high enough to hand the screen media to the other employee, when EE stepped on the electric motor EE slipped and EE's knee buckled, EE continued working and never said EE hurt self

Team member was walking on unstable ground. Sunk into mud up to knee, went to turn to grab a stable ladder and felt a pop in the right knee.

EE dismounting loader ladder, boot tread got caught in the bottom rung of step, fell to the ground, striking left knee on concrete floor. EE fell on 3/4/20, reported to clinic on 3/5/20. On 3/16/20 EE given physical therapy.

EE was on the dozer and closed the door of the master switch and grabbed the door handle and EE's hand slipped off the door handle and EE fell. As EE fell EE's right leg hit the track of the dozer.

Employee was exiting loader with ladder, right foot already on group, when left foot became caught on bottom step, causing employee to lose balance and fall to ground. Employee tried to catch self and fracturing left wrist.

The employee was walking across the yard and slipped and fell in the snow. Hitting the back of EE's head.

Operator was exiting cab of 336F Excavator holding on to the handrail facing the inside of cab when both feet slipped off track feeling a jerking motion to EE's left shoulder. The tracks on the machine were damp with material build up.

Miner was removing a rock from a conveyor. When they stepped back, they tripped over a rock and jammed their left thumb while trying to catch themselves.

Employee was walking and transitioned from a paved surface to an unpaved surface and stepped into a hole injuring lower leg.

Clear weather, good lighting. Employee had finished changing a tire and was putting dismounted tire onto lift gate. Mis-stepped and fell from lift gate, landing on EE's back on the ground. Received a skin laceration, which received stitches at Tripler Arony Medical Center.

Employee stepped off a skiff onto the trailer of the skiff and lost balance, employee extended hands as they fell forward, they bent the right middle and ring finger backwards causing laceration at the top joint. Employee received sutures on both fingers.

WHILE CLIMBING ONTO LOADER, EMPLOYEE CAUGHT RIGHT FRONT TOE OF BOOT ON DECK CAUSING EE TO FALL FORWARD AND JAM RIGHT MIDDLE FINGER INTO CORNER OF RADIATOR GUARD.

Office worker tripped on floor mat, falling and breaking right femur.

Employee fell off ladder catching self with right hand.

Employee was walking by the mud pump and slipped in the mud, injuring lower back.

Prior to shift, team member fell through doorway into break room landing on left side and breaking hip. Walkway and break room are finished concrete slab which were clean and clear of identifiable obstructions. No other environmental factors were identified.

Conditions contributing to the injury included snow on the ground and rocky terrain.

Employee was walking from personal vehicle to office and tripped over a small taper at scales, hitting forehead on ground and causing a contusion.

Employee was walking towards a conveyor on uneven ground and lost balance, causing him to fall and twist ankle.

EE was pulling barge line on stern on barge 43, he stated the barge was muddy and he slipped, feeling something wrong in his left knee, he had no pain right away but by the end of the day he felt it hurting. Medical attention 1/28/15, MRI in Torrance Ca on 1/31/15, limits no prolonged walking/climbing, he is still working, we will update report when results from MRI are received.

The employee was getting numbers off of fuel tank trailer SB25 and stepped off and rolled ankle

Was walking across yard slipped on snow covered ice. He had a quad tendon rupture in his left knee.

Fell 15 feet to the ground while on the cat walk of jaw crusher directing backhoe operator.

Injured employee tripped in a low spot caused by build up on a catwalk and sprained his ankle.

While mothballing wash plant for winter, miner slipped on ice next to a light plant, falling onto the hitch of the light plant. Was examined by medical provider and given pain medication

Employee was walking out of switch van after putting harness on. He started to slip on the top step, but caught himself on hand rail, straining his back.

Handing tools to his partner from the hopper of the conveyor while working on belt. EE turned around and fell(morning dew made the belt slippery) catching his left arm on the hook of a bungee cord.

Injured employee was standing next to a parked skid steer loader talking to emp. sitting inside the skid steer loader. IE turned to walk away from skid steer loader & tripped on the loader's bucket which had a 4' extension attached to the bucket. IE tripped & fell to ground producing a fracture to rt 5th finger. Positive x-ray diagnosed on 8/03/2011. IE initially refused treatment.

Employee was replacing a 10" diameter pipe that went through the catwalk (expanded metal) that he was working on. After he removed the pipe and co-workers were raising the new pipe, the employee turned to retrieve an air hose and his left leg fell into the 10" hole in the catwalk where the old pipe used to be.

EE had just finished fueling the EQ. when he laid the hose/nozzle down to climb down from the machine. As he put the nozzle down he stepped on it and it slipped out from under his foot causing him to fall. EE fell to the ground and landed on his stomach.

Driver was getting out of truck and turned to walk back to unlock the tailgate when he slipped in the mud. On the way to the ground he reached up with his right hand and grabbed for the door handle, instead he grabbed the door jam and the door closed so hard on his hand to the point it actually latched shut. Causing a laceration to his ring finger and exposed the bone.

Employee was walking on wet concrete, when he slipped, causing him to fall to the ground and landing on his buttocks, hip and back.

The weather on the day of the incident was hot with temperatures in the mid to high 80s with little breeze and brief periods of rain. Believe the hot humid weather contributed to the employee fainting. Injured contractor's injuries included dislocated right shoulder, hairline fracture in right shoulder and minor cuts and abrasions to contractor's head and face.

Employee wandered away from job duties, past a clearly marked "Do Not Enter" sign and fell into crusher feeder. He broke his left femur and left wrist.

He slipped on step of loader, landed on counter weight corner tearing stomach muscles.

Employee was welding on a platform for a cone crusher, fell about 3 1/2 feet to ground while descending ladder. Ladder was inside platform between two catwalks. Employee lost his balance and fell striking and fracturing his coccyx either on angle iron or rock on ground.

Employee slipped and fell. He caught himself with outstreched arm, dislocating shoulder.

Slip, fall while getting out of cab of service truck. Back strain.

The worker was climbing down in a proper 3 pt contact from the flat bet trailer. The heel of his boot caught on a short stake, in a stake pocket, he lost his balance and fell to the ground. He landed on his right elbow, chipping the bone. The trailer is 58" off the ground. The worker had been wearing fall restraint just prior to the fall.

Slipped while stepping down from a conveyor Recieved an acute lumbard strain

EE came down the ladder on a front end loader fowards to step on an Abutment. He missed the abutment and fell on his left shoulder, injuring it.

Working on a truck in the shop, the truck started to leak hydraulic oil. Employee walked and slipped on the oil.

THE WORKER WAS STANDING ON AN EXCAVATOR TRACK WHEN HIS FEET WENT OUT FROM UNDER HIM AND HE SAT ON HIS TAIL BONE. THE RESULT IS A BRUISED TAIL BONE.

Splicing a conveyor belt on the radial stacker. As employee was cutting the belt the belt ripped and knocked the employee off the belt. Employee fell approx. 10 feet to the ground.