Search the record

Operator was dismounting D-6 dozer when EE's foot slipped from the blade arm due to wet and muddy conditions causing EE to hit EE's left knee on the arm. Operator had just returned to work from a double knee replacement and the impact on the knee caused the incision/scar area to reopen.

Employee was on a safe rack when the flooring gave way. Employee did not fall all the way through and fall protection was in use. During the process of catching self the employee bruised the left arm and left leg.

The employee met with supervisors in a parking lot on the east side of the building. After the conversation, EE turned to walk back to the office and tripped over a wheel chock (angle iron) because EE did not fully clear it. EE fell onto EE's right knee and elbow. EE was wearing steel-toe boots, and no other PPE was involved.

The driller shooter was carrying boxes into the blasting magazine. EE bumped EE's hard hat on the door frame, and when EE went to grab it, EE slipped on the magazine floor (raining and muddy). When EE's weight re-distributed to EE's right leg, EE felt it pop at the knee, which was a ruptured quadricep tendon and right thigh muscle. The knee was professionally immobilized.

Employee was walking into the maintenance office when EE tripped, fell and land on the maintenance lunchroom glass door. Employees elbow/arm broke the glass on the door resulting in laceration of the tricep area.

Employee was climbing off the ladder of a 993 loader. The employee missed the last step causing EE to fall to the ground injuring EE's right elbow.

Teammate fell backwards while restacking a pallet from the conveyor

Employee was loading supplies into EE's scoop. The employee's foot got caught and EE fell. As EE was falling, EE reached EE's arm out and fell onto a pallet. A nail from the pallet poked EE in the right forearm requiring one stich to close the wound.

A miner tweaked EE's knee while accessing the boat to work on the water pump. The injury occurred on 5/15/2026 and was placed on restricted duty on 5/18/2026. The miner has returned to full duty on 5/22/2026 with no lost work days.

Emloyee stepped out of a medium duty vehicle onto uneven ground and rolled their ankle. This caused a fracture to the distal fubula.

Employee was on the lowest step of a 4 foot step ladder to work on a F250 and stepped down twisting EE's right ankle on level ground causing a sprained ankle requiring a day of rest and no climbing ladders for 2 weeks.

IE was unloading boxes from the tailgate of a pickup truck and carrying them into a Connex storage container. As IE stepped up into the container, EE's foot slipped and EE's right leg came down hard onto the ground causing a sprain to EE's right knee.

Employee was getting off the bus at the Underground to report for pre-shift lineout. Upon exiting the bus, the employee twisted their right ankle.

EMPLOYEE WAS CLIMBING OFF OF A LOADER WHEN EE SLIPPED OFF OF THE CHAIN STEP, EE'S FOOT HIT THE GROUND AND EE ROLLED EE'S RIGHT ANKLE.

Employee was dismounting EE's Loader. EE's foot twisted as EE stepped off the ladder onto the ground.

Employee was cleaning hardened material from around piping when released material and water caused EE to lose footing and fall into the water. Employee struck the left side of EE's body, head, & left leg/knee on piping & was briefly submerged before being assisted by a coworker. Initial treatment provided by site nurse. Employee was later removed from site pending medical release.

Coworker mis-stepped while climbing a water truck, slipped and cut EE's face.

As the Safety Technician was walking past the power center, EE tripped over a cable causing EE to fall awkwardly on EE's right knee. Started missing work on 5/18/2026.

On 5-14-2026, the employee lost EE's footing and fell while working on a belt tail piece. The employee received a laceration to EE's head which required one suture to close.

Employee was cleaning out the thickener tanks on the south end. While cleaning, employee slipped on mud. Employee fell and twisted left knee.

Walking across the 650 duckbill to grab cribs for relay bar. EE stepped off the duckbill into a hole and twisted EE's left ankle.

Employee was working on a belt, was holding on to a piece of Angle iron, the angle iron came loose, and the employee fell approx. 6 feet, employee suffered a small cut on EE's right forearm and was taken to the Urgent care. Employee was returned to duty same morning

Employee was assisting with core tube retrieval activities at the drill when an issue occurred. During the process of resolving the issue, the employee lost balance and contacted the drill feed frame with EE's hand, resulting in a hand injury.

Employee was in the process of removing a hydraulic hand pump and jack from the top of the tub base and hung EE's foot on a hose and fell forward and EE's thumb on the left hand was caught between pump and ram which caused a fracture of the first joint of the left thumb.

Slip lead to sprain of right foot. Restrictions imposed

Shoulder strain caused by slip into open grating

Employee was carrying a printer down a set of stairs when EE slipped and fell.

Ee was stepping out of conex holding a box of uniforms and EE rolled EE's right foot on the lift gate. Seen at clinic, diagnosed with right ankle strain, and released with restrictions that do not preclude EE's full duty as a planner.

Employee stated EE was walking back to the section when EE rolled EE's ankle. Employee sought medical attention and was taken off work.

EE was welding hopper chute standing on belt rollers when EE lost EE's footing and twisted EE's left knee.

While exiting the machine to take a break using the ladder handrail system the employee losing grip on a grease contaminated handrail resulted in a fall from the equipment approximately 3-4 feet to the quarry sand surface. This placed the operator off work and modified duty as of 05/11/2026 due to a lumbar strain/sprain.

The aero phine bulk storage tote was leaking. The employee checked the tote level and slipped, breaking both ankles.

Employee jumped off the drive frame of the conveyor, and fell on EE's left hip.

employee slipped and fell on their right side of their body

Employee was getting out of mantrip tripping on another employees foot, twisting the left knee. Employee had surgery on knee 05/22/2026 and placed on restrictions of mainly sit down work only.

Employee was walking from the dryer area to the main office when EE tripped over a constructed metal ledge leaving the dryer area.

A miner was working from a ladder while applying a patch to a screener feed box. While reaching, the ladder slid, causing the miner to fall onto the ladder. The miner sustained a laceration to the right knee and a fracture of the right patella. The miner was prescribed medication and lost time.

Employee was cleaning cat walk around Jaw area

Operatpor was fueling truck and tripped on fuel hose while replacing the hose in holder.

While exiting a water truck, the employee missed the second rung from the top of the ladder and fell approximately three feet to the ground. During the fall, the employee attempted to regain balance by grabbing the door, which caused EE's body to shift to the right. Upon impact, EE landed on EE's right elbow and reported pain.

Employee was climbing down the steps of a blast hole drill, when the employees first foot touched the ground EE let go of the handholds with EE's hands, at this moment the other foot got caught on the last rung of the steps causing EE to fall backward onto the ground. The employee had soreness and stiffness in the lower right back.

IE slipped while descending some steps in the prep plant. IE did not maintain three points of contact while on the stairs. Injury was not the result of a training or compliance issue.

Employee was shoveling on A1 header bulkhead when EE stated EE slipped on a small hill before the belt line and went to catch self and when EE went to catch self EE caught EE's hand in-between the top roller and bracket.

EE was exiting the 980loader in the shop,maintaining 3-points of contact,EE's L foot was on the ground & EEs R foot got stuck in the bottom step.This threw the EE off balance and EE fell backwards and EEs L side landed on a pallet with a cylinder on it.The pallet was approx 10'away from the loader.EE broke 4 ribs on EEs L side from the fall onto the pallet with the cylinder on it.

IE was running string line for a new refuse drive and when EE turned around, EE tripped on another section of the line that had been run. When IE fell EE hurt EE's foot.

Employee and owner were performing maintenance on screen plant. Employee was on screen and jumped down onto lower screen breaking both ankles.

Employee fell into a chute and onto the material below when the hatch door EE was leaning against unexpectedly opened. The hatch opened because the winch holding it in a semi closed position broke from its anchorage point.

Employee slipped and fell on their left knee while pouring a concrete slab. Injury was diagnosed as a sprain, and the employee was prescribed anti-inflammatory medication.

blaster was loading a shot and stepped in a drill hole causing EE to lacerate EE's shin, the laceration required 3 stitches

Employee was carrying 20' beams through mud. The employee got EE's foot caught on a cable bolt that was sticking out of the mud, causing EE to fall with the beam in EE's hands. Employee fell to the ground, crushing EE's left hand under the beam and EE's body weight.