Alabaster Plant Metal/Non-Metal

Employee was cleaning out from under the rail scales, he was shovelling lime into a 5 gallon bucket to be dumped. Lime fell down into the employee's pants and he suffered 2nd degree burns across his buttocks and one of his legs.

EE was going to plug the kiln, at first he put the plug in the feed pipe backwards so he had to reposition it. When he went to re position the plug the t-handle on the plug caught his hand between the conveyor belt and the bar. Causing burns and breaking 2 fingers.

Employee was removing a damper blade from kiln 2 scrubber and pulled his lower back. He didn't go to the doctor until 12/31/08 and was placed on restricted work duty.

Employee was re-installing trunion roll housing cap, using bars to roll it over to align bolts and holes. The cap rolled and smashed employee's hand and middle finger.

Employee was removing build-up from a pulley with a bar when the bar caught in the belt and struck his left arm.

Employee was closing the door on the bottom of a railcar and twisted the lower part of his back. He did not go to the doctor until 4/2/08, at which time he was placed on restricted work duty.

Injured pulled slide on #2 drag, slipped and fell, dropped slide on leg. Did not go to doctor until 3/20/2007.

Cutting hose off of a pipe, injured's hand slipped on box cutter and blade cut finger.

Injured was pulling on a rail switch that had been run over and broken when he strained his back. Accident became lost time on 9/16/05 when it was discovered that he has a bulged disc in his back.

While working on a water line in the ground, lifted a 3 inch piece of pipe, put it on shoulder, his boss had the other end, injured his neck.

Injured was attempting to put a drawhead back on a railcar. While holding the drawhead to put into position it slipped causing a strain to injured's left groin. Became reportable on 11-2-04 when injured was placed under restriction of no lifting by physician.

DUMPED WHEELBARROW HALF FULL OF COAL REJECT. DID NOT FEEL CATCH IN HIS BACK UNTIL HE STARTED UP THE STEPS.

Injured was working off of a ladder removing bolts from a pipe flange. Pipe came loose from flange striking injured and knocking him off of the ladder.

INJ BENT OVER TO RELEASE THE ARM ON THE RAIL SWITCH. THE LATCH ON THE ARM DID NOT RELEASE. INJ SNATCHED UP THE RELEASE STRAINING BACK. BECAME REPORTABLE ON 3/9/04 WHEN DR ADVISED TO BE OF F WORK. UNDERWENT MRI, CONTINUATION OF BACK PROBLEMS.

INJURED HIT LEFT HAND WITH HAMMER WHILE HAMMERING SPIKE ON RAIL. REPORTABLE BECAUSE OF FRACTURE ONLY.

INJURED WAS ON LADDER ABOUT 6' OFF THE GROUND. HE SLIPPED OFF THE LADDER AND JUMPED BACKWARD HITTING THE GROUND ON BOTH HEELS.

INJURED AND CO-WORKER WERE REPLACING MID-KILN THERMALCOUPLE ON #1 KILN. WHEN PUTTING THE PROBE IN THE KILN, HE WAS ABOUT TO TURN THE PROBE TO LINE IT UP WHEN CO-WORKER PUSHED THE PROBE SMASHIN G FINGER BETWEEN FLANGES.