Employee was working on the Jaw Feeder and was removing the Jaw Grizzly Bars. EE was helping to remove the old Grizzly Bars. One of the bars hung up while EE was trying to move it. When the bar broke free, it rolled over and crushed left hand-index, middle, and ring fingers. This resulted in lacerations to all three fingers.
Granite Mountain Qrys-Crystal Hill Plt: 209 citaciones de la MSHA Metal/Non-Metal
Granite Mountain Qrys-Crystal Hill Plt tiene $50K en multas propuestas de MSHA y $0 pendientes en 8 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Granite Mountain Qrys-Crystal Hill Plt.
- Muertes
- 0
- Incidentes totales
- 64
- Años en registro
- 1987–2025
- Último incidente
- May 2025
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Granite Mountain Qrys-Crystal Hill Plt tiene $50K en multas propuestas de MSHA y $0 pendientes en 8 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 1 · 50%
- Anuladas o retiradas 1 · 50%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| CENT20030175M | Settlement | Hodgdon | 2003 | $13K → $10K |
| CENT20030176M | Settlement | Hodgdon | 2003 | $11K → $8K |
| CENT20030098M | Settlement | Bulluck | 2003 | $1K → $896 |
| CENT20030138M | Settlement | Bulluck | 2003 | $993 → $497 |
| CENT 2011-11M | Settlement | Lesnick | 2011 | $946 → $946 |
| CENT 2003-230-M | Dismissal | Lesnick | 2004 | $655 → $655 |
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Contaminantes en minas de metal y no metal (muestras personales)
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.
Última medición: 2025-03-11
ⓘ
Muchas muestras son mediciones de detección de sustancias sin límite de exposición aplicable; se cuentan como muestras pero se excluyen de toda cifra de exceso. Los porcentajes de exceso usan solo muestras con límite establecido.- Quartz, respirable, >1% Qtz3410 en exceso
- Respirable dust, <.1mg17
- Unlisted Particulate, respirable, <1% Qtz4
Ver los análisis individuales (55)
| Fecha | Contaminante | Concentración | Límite | Conc / límite | Ocupación |
|---|---|---|---|---|---|
| 2025-01-28 | Quartz, respirable, >1% Qtz | 0.54 | 0.2 | 2.70 | Bobcat Operator |
| 2007-06-06 | Quartz, respirable, >1% Qtz | 0.54 | 0.23 | 2.35 | Cleanup Man |
| 2005-08-31 | Quartz, respirable, >1% Qtz | 0.73 | 0.26 | 2.81 | Crusher Oper/Worker |
| 2005-08-31 | Quartz, respirable, >1% Qtz | 0.46 | 0.18 | 2.56 | Cleanup Man |
| 2005-08-31 | Quartz, respirable, >1% Qtz | 0.26 | 0.19 | 1.37 | Cleanup Man |
| 2005-06-15 | Quartz, respirable, >1% Qtz | 0.44 | 0.2 | 2.20 | Crusher Oper/Worker |
| 2005-06-15 | Quartz, respirable, >1% Qtz | 1.31 | 0.2 | 6.55 | Cleanup Man |
| 2005-06-15 | Quartz, respirable, >1% Qtz | 2.21 | 0.33 | 6.70 | Cleanup Man |
| 2005-06-15 | Quartz, respirable, >1% Qtz | 0.61 | 0.15 | 4.07 | Truck Driver |
| 2002-07-16 | Quartz, respirable, >1% Qtz | 0.47 | 0.18 | 2.61 | Crusher Oper/Worker |
| 2025-03-11 | Quartz, respirable, >1% Qtz | 0.17 | 0.22 | 0.77 | Bobcat Operator |
| 2025-01-28 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2025-01-28 | Respirable dust, <.1mg | 0 | Oiler, Greaser | ||
| 2025-01-28 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2019-03-20 | Quartz, respirable, >1% Qtz | 0.61 | 0.73 | 0.84 | Truck Driver |
| 2019-03-20 | Quartz, respirable, >1% Qtz | 0.39 | Supervisor, Co. Official | ||
| 2019-03-20 | Respirable dust, <.1mg | 0 | Utility Man | ||
| 2019-03-20 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2013-01-29 | Unlisted Particulate, respirable, <1% Qtz | 0.32 | Front-end Loader Operator | ||
| 2013-01-29 | Quartz, respirable, >1% Qtz | 0.7 | 3.29 | 0.21 | Crusher Oper/Worker |
| 2013-01-29 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2013-01-29 | Quartz, respirable, >1% Qtz | 0.12 | 1.16 | 0.10 | Truck Driver |
| 2013-01-29 | Quartz, respirable, >1% Qtz | 0.46 | 2.29 | 0.20 | Bobcat Operator |
| 2012-05-31 | Quartz, respirable, >1% Qtz | 0.2 | 0.68 | 0.29 | Bobcat Operator |
| 2012-05-31 | Quartz, respirable, >1% Qtz | 0.4 | 1.46 | 0.27 | Crusher Oper/Worker |
| 2012-05-31 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2012-05-31 | Quartz, respirable, >1% Qtz | 0.54 | 1.2 | 0.45 | Front-end Loader Operator |
| 2012-05-31 | Quartz, respirable, >1% Qtz | 0.26 | 1.49 | 0.17 | Truck Driver |
| 2011-03-30 | Unlisted Particulate, respirable, <1% Qtz | 0.23 | Front-end Loader Operator | ||
| 2011-03-30 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2011-03-30 | Quartz, respirable, >1% Qtz | 0.48 | 0.51 | 0.94 | Utility Man |
| 2011-03-30 | Quartz, respirable, >1% Qtz | 0.2 | 0.6 | 0.33 | Truck Loader |
| 2011-03-30 | Quartz, respirable, >1% Qtz | 0.79 | 1.53 | 0.52 | Cleanup Man |
| 2009-05-12 | Respirable dust, <.1mg | 0 | Utility Man | ||
| 2009-05-12 | Quartz, respirable, >1% Qtz | 0.49 | 0.91 | 0.54 | Crusher Oper/Worker |
| 2007-09-19 | Quartz, respirable, >1% Qtz | 0.14 | 0.41 | 0.34 | Ground Control/Timberman |
| 2007-06-06 | Respirable dust, <.1mg | 0 | Crusher Oper/Worker | ||
| 2007-06-06 | Unlisted Particulate, respirable, <1% Qtz | 0.31 | Front-end Loader Operator | ||
| 2007-06-06 | Quartz, respirable, >1% Qtz | 0.19 | 1.92 | 0.10 | Front-end Loader Operator |
| 2007-06-06 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2006-05-09 | Unlisted Particulate, respirable, <1% Qtz | 0.41 | Front-end Loader Operator | ||
| 2006-05-09 | Quartz, respirable, >1% Qtz | 0.12 | 0.23 | 0.52 | Bobcat Operator |
| 2006-05-09 | Quartz, respirable, >1% Qtz | 0.31 | 1.07 | 0.29 | Crusher Oper/Worker |
| 2006-05-09 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2006-05-09 | Quartz, respirable, >1% Qtz | 0.4 | 2.41 | 0.17 | Front-end Loader Operator |
| 2005-11-22 | Quartz, respirable, >1% Qtz | 0.26 | 0.77 | 0.34 | Crusher Oper/Worker |
| 2005-11-22 | Quartz, respirable, >1% Qtz | 0.13 | 0.24 | 0.54 | Cleanup Man |
| 2005-11-22 | Respirable dust, <.1mg | 0 | Cleanup Man | ||
| 2005-08-31 | Quartz, respirable, >1% Qtz | 0.19 | 0.31 | 0.61 | Truck Driver |
| 2005-08-31 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2005-06-15 | Respirable dust, <.1mg | 0 | Truck Driver | ||
| 2002-07-16 | Respirable dust, <.1mg | 0 | Front-end Loader Operator | ||
| 2002-07-16 | Quartz, respirable, >1% Qtz | 0.52 | 0.74 | 0.70 | Cleanup Man |
| 2002-07-16 | Quartz, respirable, >1% Qtz | 0.13 | 0.55 | 0.24 | Truck Driver |
| 2002-07-16 | Respirable dust, <.1mg | 0 | Truck Driver |
Granite Mountain Qrys-Crystal Hill Plt registró 5.35 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2025.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2025 * | 5.35 | 0.00 | 0.000 |
| 2024 * | 0.00 | 0.00 | 0.000 |
| 2023 * | 4.87 | 0.00 | 0.000 |
| 2022 * | 14.57 | 0.00 | 0.000 |
| 2021 * | 4.74 | 0.00 | 0.000 |
| 2020 * | 0.00 | 0.00 | 0.000 |
| 2019 * | 0.00 | 0.00 | 0.000 |
| 2018 * | 5.64 | 5.64 | 0.000 |
- E C Rowlett Construction Company Inc 1982 a 2005
- McGeorge Contracting 2005 al presente
| Año | Empleados |
|---|---|
| 2026 | 19 |
| 2025 | 21 |
| 2024 | 21 |
| 2023 | 17 |
| 2022 | 15 |
| 2021 | 17 |
| 2020 | 17 |
| 2019 | 16 |
| 2018 | 16 |
| 2017 | 16 |
| 2016 | 15 |
| 2015 | 14 |
| 2014 | 15 |
| 2013 | 13 |
| 2012 | 16 |
| 2011 | 10 |
| 2010 | 18 |
| 2009 | 14 |
| 2008 | 16 |
| 2007 | 19 |
| 2006 | 20 |
| 2005 | 20 |
| 2004 | 22 |
| 2003 | 24 |
| 2002 | 24 |
| 2001 | 24 |
| 2000 | 22 |
Granite Mountain Qrys-Crystal Hill Plt se ubica en Pulaski County, Arkansas, donde la categoría minera del Censo representa el 0.2% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 3,103 | 0 | 0 | 0.0 |
| 2026 Q1 | 7,918 | 0 | 0 | 0.0 |
| 2025 Q4 | 8,557 | 2 | 0 | 233.7 |
| 2025 Q3 | 9,018 | 2 | 0 | 221.8 |
| 2025 Q2 | 10,272 | 0 | 0 | 0.0 |
| 2025 Q1 | 9,527 | 3 | 1 | 314.9 |
| 2024 Q4 | 10,208 | 0 | 0 | 0.0 |
| 2024 Q3 | 10,028 | 6 | 1 | 598.3 |
Mostrar 98 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 10,340 | 0 | 0 | 0.0 |
| 2024 Q1 | 10,609 | 2 | 1 | 188.5 |
| 2023 Q4 | 10,500 | 0 | 0 | 0.0 |
| 2023 Q3 | 10,264 | 3 | 0 | 292.3 |
| 2023 Q2 | 11,191 | 0 | 0 | 0.0 |
| 2023 Q1 | 9,133 | 3 | 1 | 328.5 |
| 2022 Q4 | 8,570 | 0 | 0 | 0.0 |
| 2022 Q3 | 10,066 | 0 | 0 | 0.0 |
| 2022 Q2 | 11,220 | 2 | 0 | 178.3 |
| 2022 Q1 | 11,328 | 0 | 0 | 0.0 |
| 2021 Q4 | 10,547 | 0 | 0 | 0.0 |
| 2021 Q3 | 12,477 | 0 | 0 | 0.0 |
| 2021 Q2 | 10,957 | 1 | 0 | 91.3 |
| 2021 Q1 | 8,237 | 0 | 0 | 0.0 |
| 2020 Q4 | 10,050 | 0 | 0 | 0.0 |
| 2020 Q3 | 8,740 | 2 | 0 | 228.8 |
| 2020 Q2 | 8,367 | 0 | 0 | 0.0 |
| 2020 Q1 | 9,119 | 2 | 0 | 219.3 |
| 2019 Q4 | 8,884 | 0 | 0 | 0.0 |
| 2019 Q3 | 9,483 | 0 | 0 | 0.0 |
| 2019 Q2 | 9,363 | 1 | 0 | 106.8 |
| 2019 Q1 | 7,870 | 2 | 0 | 254.1 |
| 2018 Q4 | 7,783 | 0 | 0 | 0.0 |
| 2018 Q3 | 8,419 | 0 | 0 | 0.0 |
| 2018 Q2 | 9,284 | 0 | 0 | 0.0 |
| 2018 Q1 | 9,982 | 1 | 0 | 100.2 |
| 2017 Q4 | 7,990 | 0 | 0 | 0.0 |
| 2017 Q3 | 7,841 | 1 | 0 | 127.5 |
| 2017 Q2 | 11,001 | 0 | 0 | 0.0 |
| 2017 Q1 | 7,601 | 3 | 0 | 394.7 |
| 2016 Q4 | 9,131 | 0 | 0 | 0.0 |
| 2016 Q3 | 7,661 | 0 | 0 | 0.0 |
| 2016 Q2 | 8,460 | 1 | 0 | 118.2 |
| 2016 Q1 | 8,421 | 3 | 0 | 356.3 |
| 2015 Q4 | 8,194 | 0 | 0 | 0.0 |
| 2015 Q3 | 8,840 | 0 | 0 | 0.0 |
| 2015 Q2 | 8,256 | 1 | 0 | 121.1 |
| 2015 Q1 | 7,831 | 1 | 0 | 127.7 |
| 2014 Q4 | 7,861 | 0 | 0 | 0.0 |
| 2014 Q3 | 8,010 | 3 | 0 | 374.5 |
| 2014 Q2 | 7,929 | 0 | 0 | 0.0 |
| 2014 Q1 | 7,218 | 2 | 0 | 277.1 |
| 2013 Q4 | 5,228 | 0 | 0 | 0.0 |
| 2013 Q3 | 5,450 | 0 | 0 | 0.0 |
| 2013 Q2 | 5,288 | 2 | 0 | 378.2 |
| 2013 Q1 | 5,825 | 4 | 0 | 686.7 |
| 2012 Q4 | 6,893 | 0 | 0 | 0.0 |
| 2012 Q3 | 7,283 | 0 | 0 | 0.0 |
| 2012 Q2 | 7,199 | 3 | 1 | 416.7 |
| 2012 Q1 | 6,181 | 4 | 0 | 647.1 |
| 2011 Q4 | 5,233 | 0 | 0 | 0.0 |
| 2011 Q3 | 5,222 | 0 | 0 | 0.0 |
| 2011 Q2 | 6,522 | 1 | 0 | 153.3 |
| 2011 Q1 | 6,568 | 0 | 0 | 0.0 |
| 2010 Q4 | 6,690 | 3 | 1 | 448.4 |
| 2010 Q3 | 8,688 | 4 | 1 | 460.4 |
| 2010 Q2 | 6,675 | 0 | 0 | 0.0 |
| 2010 Q1 | 4,865 | 9 | 0 | 1849.9 |
| 2009 Q4 | 6,124 | 0 | 0 | 0.0 |
| 2009 Q3 | 6,654 | 0 | 0 | 0.0 |
| 2009 Q2 | 7,533 | 2 | 0 | 265.5 |
| 2009 Q1 | 8,186 | 0 | 0 | 0.0 |
| 2008 Q4 | 8,687 | 0 | 0 | 0.0 |
| 2008 Q3 | 9,491 | 0 | 0 | 0.0 |
| 2008 Q2 | 7,089 | 1 | 0 | 141.1 |
| 2008 Q1 | 9,261 | 10 | 0 | 1079.8 |
| 2007 Q4 | 9,237 | 0 | 0 | 0.0 |
| 2007 Q3 | 9,600 | 0 | 0 | 0.0 |
| 2007 Q2 | 10,570 | 5 | 0 | 473.0 |
| 2007 Q1 | 10,138 | 3 | 0 | 295.9 |
| 2006 Q4 | 9,599 | 0 | 0 | 0.0 |
| 2006 Q3 | 11,253 | 0 | 0 | 0.0 |
| 2006 Q2 | 10,355 | 8 | 4 | 772.6 |
| 2006 Q1 | 11,553 | 3 | 1 | 259.7 |
| 2005 Q4 | 11,884 | 0 | 0 | 0.0 |
| 2005 Q3 | 11,588 | 4 | 4 | 345.2 |
| 2005 Q2 | 8,128 | 11 | 4 | 1353.3 |
| 2005 Q1 | 7,965 | 0 | 0 | 0.0 |
| 2004 Q4 | 8,604 | 0 | 0 | 0.0 |
| 2004 Q3 | 9,463 | 0 | 0 | 0.0 |
| 2004 Q2 | 9,539 | 5 | 2 | 524.2 |
| 2004 Q1 | 10,246 | 0 | 0 | 0.0 |
| 2003 Q4 | 11,933 | 0 | 0 | 0.0 |
| 2003 Q3 | 13,130 | 6 | 0 | 457.0 |
| 2003 Q2 | 12,229 | 0 | 0 | 0.0 |
| 2003 Q1 | 9,427 | 0 | 0 | 0.0 |
| 2002 Q4 | 11,125 | 4 | 1 | 359.6 |
| 2002 Q3 | 11,649 | 42 | 8 | 3605.5 |
| 2002 Q2 | 11,237 | 0 | 0 | 0.0 |
| 2002 Q1 | 8,128 | 0 | 0 | 0.0 |
| 2001 Q4 | 9,899 | 0 | 0 | 0.0 |
| 2001 Q3 | 10,193 | 6 | 5 | 588.6 |
| 2001 Q2 | 9,054 | 0 | 0 | 0.0 |
| 2001 Q1 | 7,398 | 0 | 0 | 0.0 |
| 2000 Q4 | 8,771 | 0 | 0 | 0.0 |
| 2000 Q3 | 10,700 | 0 | 0 | 0.0 |
| 2000 Q2 | 11,037 | 0 | 0 | 0.0 |
| 2000 Q1 | 10,418 | 10 | 2 | 959.9 |
Incidentes reportables
64 en archivo2025 · 1 incidente
2023 · 1 incidente
Employee was lifting 1/2" metal shim into the jaw and felt a pain in their mid-back. EE then went ahead and put the shim into place and back pain continued. EE then notified the supervisor of the back injury.
2022 · 3 incidentes
Employee was holding bolt head to enable tightening of lock nut. When the impact wrench was activated to tighten the nut, it caused the bolt to spin and crush employee's right middle finger between bolt head and crusher housing.
IE was holding the t-handle punch while co-worker was hitting it with a sledge hammer. Co-worker missed and the hammer hit the side of the crusher causing the hammer to ricochet hitting IE's hand.
Employee was using a pry bar to dislodge a rock in the tail pulley of a conveyor. After the rock was dislodged and employee was sliding out the pry bar, their hand struck a rock and resulted in laceration of their finger.
2021 · 1 incidente
EE was cutting a tac weld with grinder that had a cutting wheel. The grinder kicked back and cut EE's finger. EE was wearing gloves
2018 · 1 incidente
IE was helping with changing v-belts. The belts were put back on but 1 belt was twisted, so another EE was using a pipe wrench on the shaft and it slipped off causing the belt to roll back pinching IE's thumb.
2015 · 1 incidente
He was holding the ladder by a rope out of the way so the rock breaker could get in the jaw to hammer down the side plates. While he was holding the ladder by the rope and guiding the operator the rock breaker hit the ladder and smashing the tip of his middle finger. He was behind a guard rail
2013 · 5 incidentes
After exiting the excavator he started walking he slipped so to catch himself he put his hand out and a rock cut his hand.
He was adjusting v-belts on the main feeder with a wrench when the wrench came loose it smashed his finger between the I-beam and wrench.
He had been standing all day running the plant when he turned wrong & hurt his back. He went to the Dr. on 6/10/13 the Dr. said it was a strain and employee went back to work. He was still having some trouble 7/11/13 they scheduled an MRI. He seen surgeon on 7/22/13 & decided he didn't want surgery. He then went back on 8/8/13 & he decided to have the surgery on 8/28/13.
He was grinding inside the main frame liners in the simmon crusher when a piece of metal got in his right eye. He was wearing all of his PPE, safety glasses, and face shield. He also washed his eye out several times thinking that he had gotten. On Friday March 1st is when he when to the doctor.
He was cutting a piece of flashing when the blade came out of the flashing cutting his thumb.
2009 · 2 incidentes
The weld broke loose on piece of metal and the porta-power came up and hit him in the nose.
Was lifting gear on the side of feeder, putting on cover of the gear on the other side, and standing on unlevel ground. Accident was on 7/29/09 he didn't ask to go to the doctor till 8/13/09.
2008 · 1 incidente
Changing roller bracket got his hand caught in the bracket when it fell off the conveyor. The accident was on 4-9-08 but he didn't go to the doctor till 4-14-08
2007 · 1 incidente
Bobcat was doing clean up at the hopper when haul truck backing up to dump didn't see the bobcat & bumped the back of bobcat with tire. Employee's neck was hurting.
2005 · 1 incidente
A piece of metal popped loose and hit what he was swinging (sq. tubing) and hit his leg cutting his leg open.
2004 · 1 incidente
MOUNTING A SAFETY COVER OVER BREAKER & IT GROUNDED OUT & BLEW UP.
2003 · 4 incidentes
SANDING TRUCK AND PIECE OF METAL GOT IN EYE.
TIGHTENING BOLT ON JAW WHEN WRENCH SLIPPED, HITTING HIS HAND ON JAW FRAME, MASHING THUMB.
PUTTING BELT BACK ON & BREAKING OFF BOLTS - SHAKING BOLT BREAKER CAUSE BOLT WOULDN'T COME OUT. BOLT CAME OUT & PIECE HIT HIM IN LEFT EYE.
THE HYDRAULIC HOSE CRIMPING MACHINE MALFUNCIONED, CAUSING IT TO BREAK & A PIECE HIT HIM IN THE HEAD.
2001 · 1 incidente
DIAGNOSED WITH ACUTE SILICOSIS.
2000 · 3 incidentes
WELDING PLATES IN END DUMP BED, CHIPPING WELDS AND PIECE FLEW UNDER HOOD AND GOT IN EYE.
REPAIRING JAW OF CRUSHER, PUTTING TOGGLE BACK INJAW THE SEAT OF THE TOGGLE PLATE FELL OUT AND FELL ON HAND CRUSHING IT.
GRINDING METAL AND PIECE OF METAL FLEW IN EYE.
1999 · 1 incidente
STEPPED OFF OF TRAILER ONTO A CAN ROLLER TWISTING ANKLE.
1998 · 2 incidentes
GRINDING METAL & A PIECE OF SLAG FLEW BEHIND SAFETY GLASSES GETTING INTO EYE.
FIXING CRUSHER PICKED UP SOME METAL AND PULLED SOMETHING IN HIS BACK.
1997 · 5 incidentes
LAYING UNDEE BELT TIGHTENING UP FASTENERS WITH IMPACT WRENCH, WHEN SOMETHING FLEW IN EYE.
TIGHTENING TENSION ROD ON CONVEYOR BELT & FELL ON KNEES.
DUMPING GRAVEL & DUMP TRAUCK BED FELL DOWN TOO HARD, & PULLED MUSCLE IN SIDE.
CHECKING FUSES IN FUSE BOX. TOOK FUSE OUT AND ITEXPLODED BURNING FACE AND HAND.
EE WAS WAITING FOR ANTOHER EMPLOYEE TO RELEASE THE COME-A-LONG WHEN HE LOOKED TO SEE A JACK WAS BACK FOR ENOUGH. WHEN THE COM-A-LONG WAS RELEASED THE COME-A-LONG BROKE. RELEASING THE JAW CAT CHIGN HIS HEAD BETWEEN THE JAW AND COME-A-LONG.
1996 · 2 incidentes
DUMPING GRAVEL AND BACKED UP TOO CLOSE TO EDGE OF ROCKPILE AND END DUMP WENT OFF BACKWARD.
TIGHTENING BELT ON PUG MILL & RATCHET SLIPPED AND FINGER RAN INTO A TURNING BELT.
1995 · 4 incidentes
USING SNAP RING PLIERS TO REPLACE BAD PART ON CRUSHER TOOK SNAP PLIERS OUT & FOREIGN OBJECT WENT EYE
TAKING GEAR BOX OFF CONVEYOR BELT. ARM GOT CAUGHT BETWEEN PULLEY & GEAR BOX.
DRIVING END DUMP & STUCK HEAD OUT WINDOW & GOT SAND IN EYE.
USING COMPRESSOR TO BLOW OFF EUQIPMENT, DIRT AND SAND OFF CONVEYOR BELT.
1994 · 2 incidentes
CHANGING OXYGEN BOTTLE ON WELDING TRUCK AND DROPPED BOTTLE ON FOOT BRUISING RIGHT FOOT.
REPAIRING FRONT-END LOADER. CLIMBED DOWN LADDER AND STEPPED ON WRENCH & TWISTED ANKLE.
1993 · 3 incidentes
LOADING EXPLOSIVES - BENT OVER TO PICK-UP BOOSTERS AND KNEE FOLDED UP ON HIM.
WELDING AT CRUSHER AND A ROCK DISLODGED FROM B-STONE PILE, HITTING HIM IN THE BACK.
EMPLOYEE WAS WELDING & ASSISTING AOTHER WELDERS AND BURNED HIS EYES.
1992 · 2 incidentes
CUTTING METAL, WHEN METAL FELL HITTING HIS LEFT WRIST AND LEFT SIDE OF CHEST.
DUMPING A LOADED TRUBK ENGING DIED THE TRUCK ROLLED OFFF HILL & OVER TURNED
1991 · 3 incidentes
CHANGING BLADE ON LOADER AND BLADE FELL ON RIGHT FOOT AND BROKE BONE IN TOE.
GREASING HEAD & TAIL PULLEY,SLIPPED & FELL OFF CONVEYOR BELT ON WALKWAY HITTING HANDRAIL,STRAINING MUSCLES IN NECK & HIP -BRUISES.
DOING GENERAL MECHANIC WORK AND SOMETHING GOT IN HIS EYE.
1990 · 4 incidentes
CLEANING OUT PLANT PRYBAR SLIPPED HIT IN LEG
WORKING ON A SHAKER OR ROCK CRUSHER AND DIRT GOT IN HIS EYE.
PUTTING BELT ON BIN AND A PIECE OF METAL CHIPPED OFF AND GOT IN LEFT EYE.
GRINDING A PIECE OF METAL ON GRINDER AND A PIECE OF METAL FLEW IN HIS LEFT EYE.
1989 · 1 incidente
CARRYING MOTOR WITH 2 OTHER PEOPLE,TRIPPED AND FELL CAUSING MOTOR TO FALL ON HAND. BRUISED RIGHT HAND WITH MOTOR.
1988 · 4 incidentes
SHARPENING BIT WITH GRINDING STONE GUIDING STONE FELL APART AND HIT EMPLOYEE BRUISING HIS RT HAND AND BREAKING HIS GLASSES
ACCIDENT OCCURRED WHEN A LIFTING EYE BROKE OFF OF A GRAVEL CHUTE THAT WAS BEING REMOVED FROM THE CRUSHER THE CHUTE WEIGHED APPROX 400 TO 500 LBS THE CHUTE BUMPED I.NAME ON THE SIDE CAUSING HIM TO LOOSE HIS BALANCE THEREFORE HE FELL OFF THE CRUSHER HITTING THE SMALL OF HIS BACK ON A CONVEYOR BEFORE GOING TO THE GROUND HE WAS APPROX 8 FT OFF OF GROUND LEVEL
STEPPED OFF SHAKER AND TURNED ANKLE.
DRILL BIT HUND AND DRILL KICKED BACK HITTING WRIST
1987 · 4 incidentes
DRIVING METAL P2ST IN GROUND AND FRAGMENT BROKE OFF AND STUCK IN HIS LEFT LEG
EMPLOYEE WAS SW3NGING SLEDGE HAMMER & IT DEFLECTED OFF MOTOR COVER HITTING LEFT FOOT CAUSING HAIRLINE FX.TO THE 2ND METATURICL HAVING CAST SPLINT PUT ON
KNELT DOWN TO S2ARPEN BIT & KNEE CAME IN CONTACT WITH GRINDING WHEEL 3 INCH CUT TO RT.KNEE & HAD SUTURES
ENTERING LOADER3& TRIGGERING THE HOIST CONTROLL BUCKET CAME DOWN PINNING RT .FOOT