Granite Mountain Qrys-Crystal Hill Plt Metal/Non-Metal

Employee was lifting 1/2" metal shim into the jaw and felt a pain in their mid-back. EE then went ahead and put the shim into place and back pain continued. EE then notified the supervisor of the back injury.

Employee was holding bolt head to enable tightening of lock nut. When the impact wrench was activated to tighten the nut, it caused the bolt to spin and crush employee's right middle finger between bolt head and crusher housing.

IE was holding the t-handle punch while co-worker was hitting it with a sledge hammer. Co-worker missed and the hammer hit the side of the crusher causing the hammer to ricochet hitting IE's hand.

Employee was using a pry bar to dislodge a rock in the tail pulley of a conveyor. After the rock was dislodged and employee was sliding out the pry bar, their hand struck a rock and resulted in laceration of their finger.

EE was cutting a tac weld with grinder that had a cutting wheel. The grinder kicked back and cut EE's finger. EE was wearing gloves

IE was helping with changing v-belts. The belts were put back on but 1 belt was twisted, so another EE was using a pipe wrench on the shaft and it slipped off causing the belt to roll back pinching IE's thumb.

He was holding the ladder by a rope out of the way so the rock breaker could get in the jaw to hammer down the side plates. While he was holding the ladder by the rope and guiding the operator the rock breaker hit the ladder and smashing the tip of his middle finger. He was behind a guard rail

After exiting the excavator he started walking he slipped so to catch himself he put his hand out and a rock cut his hand.

He was adjusting v-belts on the main feeder with a wrench when the wrench came loose it smashed his finger between the I-beam and wrench.

He had been standing all day running the plant when he turned wrong & hurt his back. He went to the Dr. on 6/10/13 the Dr. said it was a strain and employee went back to work. He was still having some trouble 7/11/13 they scheduled an MRI. He seen surgeon on 7/22/13 & decided he didn't want surgery. He then went back on 8/8/13 & he decided to have the surgery on 8/28/13.

He was grinding inside the main frame liners in the simmon crusher when a piece of metal got in his right eye. He was wearing all of his PPE, safety glasses, and face shield. He also washed his eye out several times thinking that he had gotten. On Friday March 1st is when he when to the doctor.

He was cutting a piece of flashing when the blade came out of the flashing cutting his thumb.

The weld broke loose on piece of metal and the porta-power came up and hit him in the nose.

Was lifting gear on the side of feeder, putting on cover of the gear on the other side, and standing on unlevel ground. Accident was on 7/29/09 he didn't ask to go to the doctor till 8/13/09.

Changing roller bracket got his hand caught in the bracket when it fell off the conveyor. The accident was on 4-9-08 but he didn't go to the doctor till 4-14-08

Bobcat was doing clean up at the hopper when haul truck backing up to dump didn't see the bobcat & bumped the back of bobcat with tire. Employee's neck was hurting.

A piece of metal popped loose and hit what he was swinging (sq. tubing) and hit his leg cutting his leg open.

MOUNTING A SAFETY COVER OVER BREAKER & IT GROUNDED OUT & BLEW UP.

SANDING TRUCK AND PIECE OF METAL GOT IN EYE.

TIGHTENING BOLT ON JAW WHEN WRENCH SLIPPED, HITTING HIS HAND ON JAW FRAME, MASHING THUMB.

PUTTING BELT BACK ON & BREAKING OFF BOLTS - SHAKING BOLT BREAKER CAUSE BOLT WOULDN'T COME OUT. BOLT CAME OUT & PIECE HIT HIM IN LEFT EYE.

THE HYDRAULIC HOSE CRIMPING MACHINE MALFUNCIONED, CAUSING IT TO BREAK & A PIECE HIT HIM IN THE HEAD.

DIAGNOSED WITH ACUTE SILICOSIS.

WELDING PLATES IN END DUMP BED, CHIPPING WELDS AND PIECE FLEW UNDER HOOD AND GOT IN EYE.

REPAIRING JAW OF CRUSHER, PUTTING TOGGLE BACK INJAW THE SEAT OF THE TOGGLE PLATE FELL OUT AND FELL ON HAND CRUSHING IT.

GRINDING METAL AND PIECE OF METAL FLEW IN EYE.

STEPPED OFF OF TRAILER ONTO A CAN ROLLER TWISTING ANKLE.

GRINDING METAL & A PIECE OF SLAG FLEW BEHIND SAFETY GLASSES GETTING INTO EYE.

FIXING CRUSHER PICKED UP SOME METAL AND PULLED SOMETHING IN HIS BACK.

LAYING UNDEE BELT TIGHTENING UP FASTENERS WITH IMPACT WRENCH, WHEN SOMETHING FLEW IN EYE.

TIGHTENING TENSION ROD ON CONVEYOR BELT & FELL ON KNEES.

DUMPING GRAVEL & DUMP TRAUCK BED FELL DOWN TOO HARD, & PULLED MUSCLE IN SIDE.

CHECKING FUSES IN FUSE BOX. TOOK FUSE OUT AND ITEXPLODED BURNING FACE AND HAND.

EE WAS WAITING FOR ANTOHER EMPLOYEE TO RELEASE THE COME-A-LONG WHEN HE LOOKED TO SEE A JACK WAS BACK FOR ENOUGH. WHEN THE COM-A-LONG WAS RELEASED THE COME-A-LONG BROKE. RELEASING THE JAW CAT CHIGN HIS HEAD BETWEEN THE JAW AND COME-A-LONG.

DUMPING GRAVEL AND BACKED UP TOO CLOSE TO EDGE OF ROCKPILE AND END DUMP WENT OFF BACKWARD.

TIGHTENING BELT ON PUG MILL & RATCHET SLIPPED AND FINGER RAN INTO A TURNING BELT.

USING SNAP RING PLIERS TO REPLACE BAD PART ON CRUSHER TOOK SNAP PLIERS OUT & FOREIGN OBJECT WENT EYE

TAKING GEAR BOX OFF CONVEYOR BELT. ARM GOT CAUGHT BETWEEN PULLEY & GEAR BOX.

DRIVING END DUMP & STUCK HEAD OUT WINDOW & GOT SAND IN EYE.

USING COMPRESSOR TO BLOW OFF EUQIPMENT, DIRT AND SAND OFF CONVEYOR BELT.

CHANGING OXYGEN BOTTLE ON WELDING TRUCK AND DROPPED BOTTLE ON FOOT BRUISING RIGHT FOOT.

REPAIRING FRONT-END LOADER. CLIMBED DOWN LADDER AND STEPPED ON WRENCH & TWISTED ANKLE.

LOADING EXPLOSIVES - BENT OVER TO PICK-UP BOOSTERS AND KNEE FOLDED UP ON HIM.

WELDING AT CRUSHER AND A ROCK DISLODGED FROM B-STONE PILE, HITTING HIM IN THE BACK.

EMPLOYEE WAS WELDING & ASSISTING AOTHER WELDERS AND BURNED HIS EYES.

CUTTING METAL, WHEN METAL FELL HITTING HIS LEFT WRIST AND LEFT SIDE OF CHEST.

DUMPING A LOADED TRUBK ENGING DIED THE TRUCK ROLLED OFFF HILL & OVER TURNED

CHANGING BLADE ON LOADER AND BLADE FELL ON RIGHT FOOT AND BROKE BONE IN TOE.

GREASING HEAD & TAIL PULLEY,SLIPPED & FELL OFF CONVEYOR BELT ON WALKWAY HITTING HANDRAIL,STRAINING MUSCLES IN NECK & HIP -BRUISES.

DOING GENERAL MECHANIC WORK AND SOMETHING GOT IN HIS EYE.

CLEANING OUT PLANT PRYBAR SLIPPED HIT IN LEG

WORKING ON A SHAKER OR ROCK CRUSHER AND DIRT GOT IN HIS EYE.

PUTTING BELT ON BIN AND A PIECE OF METAL CHIPPED OFF AND GOT IN LEFT EYE.

GRINDING A PIECE OF METAL ON GRINDER AND A PIECE OF METAL FLEW IN HIS LEFT EYE.

CARRYING MOTOR WITH 2 OTHER PEOPLE,TRIPPED AND FELL CAUSING MOTOR TO FALL ON HAND. BRUISED RIGHT HAND WITH MOTOR.

SHARPENING BIT WITH GRINDING STONE GUIDING STONE FELL APART AND HIT EMPLOYEE BRUISING HIS RT HAND AND BREAKING HIS GLASSES

ACCIDENT OCCURRED WHEN A LIFTING EYE BROKE OFF OF A GRAVEL CHUTE THAT WAS BEING REMOVED FROM THE CRUSHER THE CHUTE WEIGHED APPROX 400 TO 500 LBS THE CHUTE BUMPED I.NAME ON THE SIDE CAUSING HIM TO LOOSE HIS BALANCE THEREFORE HE FELL OFF THE CRUSHER HITTING THE SMALL OF HIS BACK ON A CONVEYOR BEFORE GOING TO THE GROUND HE WAS APPROX 8 FT OFF OF GROUND LEVEL

STEPPED OFF SHAKER AND TURNED ANKLE.

DRILL BIT HUND AND DRILL KICKED BACK HITTING WRIST

DRIVING METAL P2ST IN GROUND AND FRAGMENT BROKE OFF AND STUCK IN HIS LEFT LEG

EMPLOYEE WAS SW3NGING SLEDGE HAMMER & IT DEFLECTED OFF MOTOR COVER HITTING LEFT FOOT CAUSING HAIRLINE FX.TO THE 2ND METATURICL HAVING CAST SPLINT PUT ON

KNELT DOWN TO S2ARPEN BIT & KNEE CAME IN CONTACT WITH GRINDING WHEEL 3 INCH CUT TO RT.KNEE & HAD SUTURES

ENTERING LOADER3& TRIGGERING THE HOIST CONTROLL BUCKET CAME DOWN PINNING RT .FOOT