Mining Incidents

Bay Road Plant #7 Metal/Non-Metal

Pennsy Supply Inc · Surface
Controlada por CRH PLC
Dover, Kent Condado, DE  ·  Activa
ID de mina MSHA: 0700059

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en Bay Road Plant #7.

Muertes
0
Incidentes totales
8
Años en registro
2001–2017
Último incidente
Feb 2017
Historial de cumplimiento
Citaciones de MSHA desde 2003
21
citaciones
6
significativas y sustanciales
$4,176
multas propuestas
$4,176
pagado a la fecha
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2025 Q4 1,681 0 0 0.0
2025 Q3 262 0 0 0.0
2025 Q2 1,809 0 0 0.0
2025 Q1 597 0 0 0.0
2024 Q4 3,552 0 0 0.0
2024 Q3 3,084 0 0 0.0
2024 Q1 3,203 0 0 0.0
2023 Q4 2,128 0 0 0.0
Los trimestres con menos de 100,000 horas reportadas aparecen atenuados: muy pocas horas para una tasa estable.
No se registran muertes en esta mina.

Incidentes reportables

8 en archivo

2017 · 1 incidente

16 de febrero de 2017 DE · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado ENVENENAMIENTO (MATERIALES TÓXICOS)
Pennsy Supply Inc · Inhalación de radiaciones, cáusticos, sustancias tóxicas y nocivas

Employee claims to have been exposed to lead fumes while cutting washers/bolts

2006 · 2 incidentes

21 de diciembre de 2006 DE · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado MANEJO DE MATERIALES
Pennsy Supply Inc · Sin clasificar, datos insuficientes

He decided to wash the pontoons on the dredge. He put Dawn liquid in a spray bottle, when he added the water it splashed in his R eye.

5 de mayo de 2006 DE · Metal/No metálico Ensayador, Geólogo, Metalurgista, Ingeniero, Gerencia de ingeniería HERRAMIENTAS MANUALES (SIN MOTOR)
Pennsy Supply Inc · Golpeado por... no clasificado en otra parte

In pump room of dredge taking bell housing off of the PTO. The housing was stuck on the shaft so they used a portapower to remove it. The housing suddenly shot off of the shaft about 8" striking the employees right hand.

2005 · 1 incidente

22 de diciembre de 2005 DE · Metal/No metálico Capataz de exterior, Cabo HERRAMIENTAS MANUALES (SIN MOTOR)
Pennsy Supply Inc · Golpeado por... no clasificado en otra parte

Employee was using a razor knife to cut tape. Knife slipped into the palm of his hand.

2003 · 2 incidentes

8 de agosto de 2003 DE · Metal/No metálico Operador de barcaza/embarcación/draga/barcaza de remolque/remolcador/lixiviación, Ribereño, Marinero de cubierta MANEJO DE MATERIALES
Tilcon Delaware · Sobreesfuerzo, no clasificado en otra parte

SLIDING PUMP FROM WORK BOAT TO DREDGE, HE HAD SEVERE PAIN IN SIDE AND BACK. HAD HARD TIME BREATHING. BROKEN RIB.

4 de febrero de 2003 DE · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado RESBALÓN O CAÍDA DE PERSONA
Tilcon Delaware · Caída sobre o contra objetos

WHILE CLEANING MATERIAL FROM INSIDE LOG WASHER, EE STEPPED ON SHAFT TO CLIMB OVER SIDE WHEN HE SLIPPED ON SHAFT FALLING ON SHANKS OF LOG WASHER. L-CHEST WALL CONTUSION.

2002 · 1 incidente

14 de enero de 2002 DE · Metal/No metálico Cargador frontal, Operador de pala-traílla, Operador de traílla, Cargador (payloader), Operador de equipo de traílla GOLPEAR O CHOCAR
Tilcon Delaware · Golpeado contra un objeto fijo

EE WAS DOING MAINTENANCE IN A SQUATTING POSITION WHEN HE WENT TO STAND UP HE STRUCK HIS HEAD (WHILE WEARING HARD HAT.) THIS ACCIDENT WAS NOT REPORTED UNTIL 1/21/02 AT THAT TIME HE SAID HE HAD RUPTURED A DISC.

2001 · 1 incidente

1 de noviembre de 2001 DE · Metal/No metálico Operador de barcaza/embarcación/draga/barcaza de remolque/remolcador/lixiviación, Ribereño, Marinero de cubierta MAQUINARIA
Tilcon Delaware · Golpeado por... no clasificado en otra parte

THERE IS A 5/8" STEEL CABLE ATTACHED TO A WENCH ON EACH SIDE OF THE FRONT OF THE DREDGE. THESE CABLES ARE ANCHORED ON SHORE. THEY ARE USED TO MOVE/POSITION THE DREDGE. THE CABLES ARE SUPPORTED ON A FLAT AT A POINT ABOUT MIDWAY BETWEEN DREDGE AND THE SHORE. THE FLATS ARE MADE OF TWO 500 GALLON PROPANE TANKS FASTENED TOGETHER WITH METAL BRACES. ONE OF THE CABLES WAS TIGHTEN TO FACILI