Mining Incidents

IMI Greenwood Sand & Gravel Metal/Non-Metal

IMI Aggregates LLC · Surface
Controlada por Fred (Pete) Irving
Greenwood, Johnson Condado, IN  ·  Activa
ID de mina MSHA: 1202027

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en IMI Greenwood Sand & Gravel.

Muertes
0
Incidentes totales
12
Años en registro
2000–2024
Último incidente
Dec 2024
Historial de cumplimiento
Citaciones de MSHA desde 2000
133
citaciones
41
significativas y sustanciales
$21,206
multas propuestas
$21,074
pagado a la fecha
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2025 Q4 4,817 0 0 0.0
2025 Q2 5,522 0 0 0.0
2024 Q4 3,547 0 0 0.0
2024 Q3 4,581 6 3 1309.8
2024 Q2 4,043 0 0 0.0
2023 Q4 510 0 0 0.0
2023 Q2 4,840 0 0 0.0
2022 Q4 657 4 2 6088.3
Los trimestres con menos de 100,000 horas reportadas aparecen atenuados: muy pocas horas para una tasa estable.
No se registran muertes en esta mina.

Incidentes reportables

12 en archivo

2024 · 1 incidente

10 de diciembre de 2024 IN · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina MANEJO DE MATERIALES
IMI Aggregates LLC · Atrapado en, bajo o entre, no clasificado en otra parte

The EE was descending the ladder of the sand heater when their ring on their left ring finger become caught on the ladder.

2021 · 1 incidente

18 de febrero de 2021 IN · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina HERRAMIENTAS MANUALES (SIN MOTOR)
IMI Aggregates LLC · Sobreesfuerzo, no clasificado en otra parte

Employee was refabricating metal on a dragline bucket. As they were breaking the metal loose the employee felt a "pop" and sharp pain in their left shoulder.

2020 · 1 incidente

10 de junio de 2020 IN · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina RESBALÓN O CAÍDA DE PERSONA
Irving Materials Inc · Caída sobre o contra objetos

Employee tried to correct "Backlashed" the Drag Cable on the Drag Drum. EE said that EE went to inspect the Drag Drum and Cable after EE positioned the machine to correct the Backlash. EE re positioned the guard, EE slipped and fell into the clutches which ripped EE's boots and cut EE's ankle and leg.

2019 · 1 incidente

11 de julio de 2019 IN · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina MAQUINARIA
Irving Materials Inc · Contacto con objetos o sustancias calientes

While welding a piece slag got in the cuff of the miners glove. This led to a small burn on the right arm. This later became infected.

2013 · 1 incidente

5 de abril de 2013 IN · Metal/No metálico Operario de banco, Cantero MANEJO DE MATERIALES
Irving Materials Inc · Sobreesfuerzo, no clasificado en otra parte

The injured employee was climbing a fixed 7' ladder to access a conveyor platform. While he was climbing, he felt a sharp pain in his Right Hand. The employee continued his inspection of the platform and climbed back down the ladder. The employee lost sensation in his right hand and approximately 2-3 hours later the employees hand swelled up.

2012 · 1 incidente

22 de junio de 2012 IN · Metal/No metálico Operario de banco, Cantero RESBALÓN O CAÍDA DE PERSONA
Irving Materials Inc · Caída a la pasarela o superficie de trabajo

Employee climbed up on a 55 gallon drum to retrieve a 3' length of 3" PVC pipe located behind the drums. The drum he stepped on tipped and he fell to the ground landing on his left foot fracturing his fifth metatarsal.

2010 · 1 incidente

3 de marzo de 2010 IN · Metal/No metálico Minero, Prospector, no clasificado en otra parte OTRO
Irving Materials Inc · NEC (no clasificado en otra parte)

Trespasser on property had an apparent heart attack and died.

2008 · 1 incidente

14 de enero de 2008 IN · Metal/No metálico Cargador frontal, Operador de pala-traílla, Operador de traílla, Cargador (payloader), Operador de equipo de traílla RESBALÓN O CAÍDA DE PERSONA
Irving Materials Inc · Caída desde una máquina

Employee was removing the spray bars while standing on the 8 inch beam that holds the screen deck, when his left foot slipped and he went to catch himself with his right foot & his ankle was turned. All of his weight was on his right ankle when he landed. The length of his fall was approx. 12 inches.

2007 · 1 incidente

16 de octubre de 2007 IN · Metal/No metálico Técnico de control de calidad, Técnico de laboratorio, Auxiliar de laboratorio MANEJO DE MATERIALES
Irving Materials Inc · Sobreesfuerzo al levantar objetos

Employee picked up a gravel pan weighing approx. 5 lbs and turned with it to go the opposite direction. When he did this he felt a sharp pain in his right leg. It hurt a lot worse when he tried to stand straight up.

2004 · 1 incidente

13 de julio de 2004 IN · Metal/No metálico Técnico de control de calidad, Técnico de laboratorio, Auxiliar de laboratorio MANEJO DE MATERIALES
Irving Materials Inc · Golpeado contra un objeto fijo

EE WAS CLIMBING DOWN OFF AN ELEVATED WALKWAY PLATFORM. AS HE WAS STEPPING DOWN, EE PANICKED WHEN HE MISSED A STEP AND CAUGHT HIS HAND ON A PROTRUDING BOLT AND LACERATED A FINGER ON HIS RIGHT HAND (8 STITCHES). (WAS DESCENDING LADDER MADE IN-HOUSE, PIVOTS/TRANSITION BOX; LOCATED BY CONVEYOR.)

2001 · 1 incidente

28 de marzo de 2001 IN · Metal/No metálico Operador de retroexcavadora, Operador de excavadora sobre orugas, Operador de grúa HERRAMIENTAS MANUALES (SIN MOTOR)
Irving Materials Inc · Golpeado por... no clasificado en otra parte

EMPLOYEE WAS DISLODGING A LARGE OBJECT FROM FEEDER TUNNEL. HE WAS USING A PRY BAR PULLING ON IT WHEN THE OBJECT CAME LOOSE HIS HAND BECAME SMASHED BETWEEN A METAL OBJECT AND THE BAR CAUSING HI M TO SMASH HIS THUMB.

2000 · 1 incidente

14 de julio de 2000 IN · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo HERRAMIENTAS MANUALES (SIN MOTOR)
Irving Materials Inc · Sobreesfuerzo al manejar o lanzar objetos

WORKER WAS USING SLEDGEHAMMER TO TIGHTEN NUT ON TOP OF CRUSHER SHAFT & INJURED BACK