Mining Incidents

US Aggregates-Lowell Quarry Metal/Non-Metal

US Aggregates Inc · Surface
Controlada por The Heritage Group
Lowell, Lake Condado, IN  ·  Activa
ID de mina MSHA: 1202134

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en US Aggregates-Lowell Quarry.

Muertes
0
Incidentes totales
6
Años en registro
2005–2026
Último incidente
May 2026
Historial de cumplimiento
Citaciones de MSHA desde 2000
135
citaciones
39
significativas y sustanciales
$23,922
multas propuestas
$23,779
pagado a la fecha
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2025 Q4 9,380 0 0 0.0
2025 Q3 8,932 3 0 335.9
2025 Q2 7,859 0 0 0.0
2025 Q1 7,988 0 0 0.0
2024 Q4 4,337 0 0 0.0
2024 Q3 2,793 0 0 0.0
2024 Q2 8,062 8 1 992.3
2024 Q1 7,201 0 0 0.0
Los trimestres con menos de 100,000 horas reportadas aparecen atenuados: muy pocas horas para una tasa estable.
No se registran muertes en esta mina.

Incidentes reportables

6 en archivo

2026 · 1 incidente

18 de mayo de 2026 IN · Metal/No metálico Conductor de camión de acarreo/fuera de carretera/carbón/mineral/mina/cantera/roca/llanta neumática, Conductor de camión de transporte RESBALÓN O CAÍDA DE PERSONA
US Aggregates Inc · Sobreesfuerzo, no clasificado en otra parte

A miner tweaked EE's knee while accessing the boat to work on the water pump. The injury occurred on 5/15/2026 and was placed on restricted duty on 5/18/2026. The miner has returned to full duty on 5/22/2026 with no lost work days.

2025 · 1 incidente

11 de enero de 2025 IN · Metal/No metálico Conductor de camión de acarreo/fuera de carretera/carbón/mineral/mina/cantera/roca/llanta neumática, Conductor de camión de transporte MANEJO DE MATERIALES
US Aggregates Inc · Golpeado por objeto que cae

When pulling the center bar out, the miners lost their grip on the bar and dropped it on a miners foot just above the steel toe portion. X-rays were done at the time and no fractures were detected and fully released. The miner was still having pain and sent for a follow up on 1/11/25, a x-ray was redone and small fracture found.

2019 · 1 incidente

3 de octubre de 2019 IN · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado MAQUINARIA
Heritage Aggregates, LLC · Golpeado por... no clasificado en otra parte

Screwing 2 studs together to adjoin the walls at the corner, drill slipped from the screw head, causing impact with right hand between middle and pointer fingers, causing laceration requiring 1 stitch.

2017 · 1 incidente

9 de diciembre de 2017 IN · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado MANEJO DE MATERIALES
Heritage Aggregates, LLC · Sobreesfuerzo al levantar objetos

Changing media panels in the 25lb 10x24 screen deck. While trying to get panel in place, EE felt left shoulder discomfort. EE did not think it was serious, continued working. The following day (Sunday) EE had pain & minimal ROM. EE went to the ER and then text plant manager.

2013 · 1 incidente

30 de enero de 2013 IN · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador MANEJO DE MATERIALES
Heritage Aggregates, LLC · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

Employee was installing a chute on the #2 crusher. The chute swung back and employee's left hand and wrist was crushed. Employee was taken to the ER via ambulance. Was released. Was seen by an Orthopedic Specialist. Was given a splint and is restricted.

2005 · 1 incidente

1 de noviembre de 2005 IN · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado HERRAMIENTAS MANUALES (SIN MOTOR)
VULCAN CONSTRUCTION MATERIALS, LP · Golpeado contra un objeto fijo

Employee was working on a crusher and removed a wear plate. The employee positioned the wear plate next to him, which created a tight spot for him to work in. He was using a hammer to clean off old material inside the crusher when he struck the old wear plate next to him causing a laceration. He was not wearing gloves at the time of the incident.